Other Hand Tools

Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench.Additional Information:• Type: Slate Cutter

Repair kit for 0320 and 0310 slate cutters.Additional Information:• Type: Spares

Laminate/MDF flooring guillotine. Cuts neatly without tearing the laminate layer. No breathable dust. Noise free. Does not need sharpening. Maximum cutting width: 210mm. Maximum cutting thickness: 10mm. Trestle rest for long boards. Includes waste collector.Additional Information:• Type: Cutter

Edma Straight Vario Laminate / MDF Guillotine is perfect for straight cuts, in length and angled cuts, up to 90° in laminate flooring. It leaves a neat cut without damaging the laminate layer. It doesn't require re-sharpening, no noise and no breathable dust is left behind. Comes with: Protective Felt Pads, 1 x Mini Trestle for long boards, 1 x Waste Collector and 1 x Removable Board Stopper for 210mm cut. Specification Max. Cut: Straight: 320mm, Angled: 210mmMax. Thickness: 15mmWeight: 12.45kgAdditional Information:• Type: Cutter

This carrier allows boards and sheets to be carried by a single person. Sturdy metal construction that has a wide base for better panel seating and an offset handle to help stop catching your knuckles in use. Handle has a plastic grip to prevent slipping.Additional Information:• Type: Board

Spare universal punch suitable for models 0310, 0324 and 0335 slate cutters.

Total Safety Slogging Wrench 36mm Non Sparking Cu-Be by EGA Master

10mm Boarding and plumbing auger OAL1000mm Cutting Length 970mm, 1001110 Suitable for formwork, interior fitting work, plumbing, heating, electrical installation, also for metals, e.g. sandwich material with steel, aluminium or profile sheeting, wood, plasterboard, light building materials, insulation;, 1001, 100111000

14mm Boarding and plumbing auger OAL1000mm Cutting Length 970mm, 1001114 Suitable for formwork, interior fitting work, plumbing, heating, electrical installation, also for metals, e.g. sandwich material with steel, aluminium or profile sheeting, wood, plasterboard, light building materials, insulation;, 1001, 100111400

20mm Lewis Auger Bit OAL 320mm Spiral Length 255mm, 1410320 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141032000

6mm Lewis Auger Bit OAL 320mm Spiral Length 255mm, 1410306 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141030600

Drill Rig for Auger Bits drill length 460mm pivoting version, 1404460 Two stageless adjustable depth stop and two spiral springs for back stroke of the power drill. Precise drilling in exact 90 to 45. With adjustable plate for the drill bush for eact guidance of the drill bit. For drill bits 8,10,12,14,16,18,20,22,24,26mm, 1404, 140446000

Lewis Auger Bit set of 8pcs OAL235mm in wooden case, 1410200 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141020000

The IRWIN Gilbow G56 is a straight blade cutting snip which has been designed for use on precious metals. The long handle/short blade ratio gives the user more control when cutting. Irwin Gilbow snips and shears have a great cutting capability which this is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece. The original Gilbow G56 jewellers tin snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.

Cranked for cutting anti-clockwise.

IRWIN Hilmor precision extruded aluminium guide. Suitable for use with the GLM bender and available to suit 15 mm or 22 mm pipes.Size. 15 mm O.D.Additional Information:• Type: Guide• Size: 15mm

Carbon monoxide detector, HxWxD 30 x 110 x 110 mm, pure white. Supplied = assembled. Height = 30 mm. Width = 110 mm. Depth = 110 mm. Colour = pure white. Product type = CO₂ warning alarms. For the detection of CO. Display that indicates the CO concentration. Audible and visual alarm. Carbon monoxide detector suitable for use in any room. When carbon monoxide escapes, every second counts. Rely on this CO detector so that you and your employees are warned in good time in an emergency. If it detects the escape of the gas, an alarm sounds at 85 decibels. The detection area of the alarm covers 62 square metres. It is recommended to use the device in rooms where there is a fireplace, tiled stove or…

RWM150 smoke alarm, extra light, HxWxD 36 x 105 x 105 mm, pure white. Supplied = assembled. Height = 36 mm. Width = 105 mm. Depth = 105 mm. Colour = pure white. Product type = smoke alarms. For use in bedrooms, children's rooms, hallways, etc. Also suitable for use in recreational vehicles (e.g. motorhomes) that people stay in. Recalibration when soiled. The RWM150 optical smoke alarm is suitable for use in bedrooms, living rooms, children's rooms and hallways. It provides a reliable warning about any smoke development and thereby saves lives. It is particularly long lasting thanks to the 10 year battery. The alarm is certified by VdS. It is one of the five best smoke alarms: in its 1/21 issue,…

Jig saw 580w 230-240v 50hz 580w no load speed 0-3000/rpm wooden saw included koma toolsSpecifications:- Power (w): 580- Tension (v): 230-240v- Speed (rpm): 3000- Cable: 2m- Type: Sierra- Mango: Soft touch ergonomic- Accessories: Suction intake included- Accessories: Vacuum connection nozzle included- Accessories: 1 wood saw included- Accessories: 1 depth rod included- Accessories: 1 exagonal key included- Measure: 25x26 cm

Provides the essential camshaft, crankshaft and tensioner setting tools for the popular VAG and Ford ranges from 2000 to 2010. For diesel TDi PD 1.4/1.9 enginesBecause these kits only contain those tools deemed as essential some users may need to consider additional tooling such as generic pulley/sprocket holding tools or DTI gauges. Laser Tools have such tools listed separately Provides the essential camshaft ,crankshaft and tensioner setting tools for the popular VAG and Ford ranges from 2000 to 2010 This kit is suitable for use with the following Cam belt kits: INA 531020110, Contitech CT1028K3, Gates K055569XS

Essential camshaft and crankshaft setting pins to allow the replacement of the camshaft drive belt on the Volvo developed 2.0 and 2.5 5cyl diesel engines which are extensively used across the Volvo range. Essential camshaft and crankshaft setting pins to allow the replacement of the camshaft drive belt on the Volvo developed 2.0 and 2.5 5cyl diesel engines which have proved so popular in the Volvo range.Equivalent to OEM 999 7007, 999 7005, 999 5433. Suitable for use with the following replacement belt kits: INA530058210, Contitech CT1010K1, Gates K15580XS. Made in Sheffield.

From 2012 VAG introduced a new version of their 1.4 TFSi petrol engine. This new engine is equipped with CoD technology (Cylinder on Demand) which allows the engine to switch between 2 and 4 cylinder running modes to maximise efficiency. The new engine design has also meant the need for new camshaft locking tools.Technical Bulletin: It has come to our attention if component C734 is over tightened when fixed to the cylinder head, it will push the inlet camshaft inner shaft to one side resulting in a misfire and generating engine fault codes (ACT or COD error codes). To correct the fault the camshaft pulley and shaft assembly must be pushed back into its original alignment position. For further …

Equivalent to the OEM tool used to lock the camshaft pulleys in their timed position during cambelt changes on the Volkswagen Audi Group 1.0L 3 cylinder petrol engine. Applications: VAG models with 3 cylinder engines 4v 1.0 litre (from 2012).Equivalent to OEM T10476, T10476A. Included in Engine Timing Tool Kit - Part No. 6230.

This coil spring compressor uses twin prongs and works at a pressure up to 1100kg. Care should be taken to increase pressure equally on both sides. Twin prongs for better grip.Maximum load 1100kg. Maximum extension 235mm. Always follow safety precautions. Wear eye protection.