Other Hand Tools

Assists the removal of small bearings for applications including alternators, generators, domestic appliances, power tools and pumps. Reach: 73mm.Spread: 19 - 45mm. Capacity: 1 tonne. Spare leg available - Part No. 0451.

An essential screw extractor set in 3/8"D and 1/2"D formats 3/8"D sizes: 2, 3, 4, 5, 6mm x 38mm long.1/2"D sizes: 8, 10, 12, 14mm x 44mm long. Sockets can be used with standard ratchet or with either a 17mm or 22mm spanner. Manufactured from alloy steel.

For setting the timing on the Fiat derived 1.3 JTD/HDi diesel engines that are found in the Fiat, Opel, Citroen, Peugeot, Ford, Suzuki Chrysler and Chevrolet ranges. Timing tool kit with Camshaft/Crankshaft alignment tools only.Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper. Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears. Full Engine rebuild kit available - Laser 4773.

This kit has the essential timing tools required for the 2.4 and 3.2 V6 FSi engines as well as the 5 cylinder 2.5 FSi petrol engines found in the Audi range. A Timing tool kit for the latest Audi with FSI chain driven engine.Kit includes Camshaft Locking Tool (2) OEM Ref T40070, Crankshaft Locking Pin OEM Ref T40069 and Timing Chain tensioner locking pin OEM T40071. Useful on Audi V6, V8 and V10 engines. Supplied in foam tray.

An engine timing kit designed to allow the timing to be set and checked on the 1.6 BMW engines found in the BMW & MINI ranges from 2010 to 2017. Engine codes covered include the popular N13 & N18 BMW petrol engines. BMW applications: 1 Series (2011 - 2015), 3 Series (2012 - 2015).MINI applications: Clubman (2011 - 2014), Mini (2010 - 2015), Coupe (2011 - 2015), Roadster (2012 - 2015), Countryman (2010 - 2017), Paceman (2013 - 2017). 1.6L petrol, engine codes N13, N18. Exhaust/Inlet Camshaft Alignment Tool - EU Registered Design.

Check and adjust the camshaft timing, remove and replace the cambelt and perform complete cylinder head rebuilds whilst maintaining the correct valve timing on Fiat, Alfa Romeo, Vauxhall, Opel and Saab. For use on Fiat, Alfa Romeo, Vauxhall/Opel, Saab JTD multijet diesel engines 1.6, 1.9, 2.4 SOHC, DOHC.Fits a wide range of models. Made in Sheffield. Supplied in metal case with EVA foam.

This kit was developed to remove and replace the timing chain or timing belts found on the Ford Duratorq range of engines as well as PSA and Ford 2.0L & 2.4L engines. In addition to the engine timing tools, the kit also includes the special tools required to enable the high pressure diesel pump to be removed without disturbing the timing chain. Timing tool kit for Ford Duratorq engines including timing pump removal and installation tools for 2.0, 2.4.For engines built from 2002 - 2010. Includes camshaft/crankshaft sprocket alignment pin, chain tensioner, fuel pump cover removal tool and fuel injection pump sprocket locking tool. Supplied in foam tray. For 1.4L, 1.5L & 1.6L TDCi, please see Laser …

Developed for the latest 2.0L diesel engine from JLR. The kit contains all the essential components required to lock the new JLR 2.0L Ingenium Diesel Engines in their timed position so that the engine timing chain can be safely removed and replaced and the engine timing checked. Vehicle applications include: Jaguar E-Pace (from 2017), F-Pace (from 2016), XE (from 2015), XF (from 2015). Land Rover Discovery (from 2017), Discovery Sport (2015 - 2019), Range Rover Evoque (2015 - 2019), Range Rover Sport (2016 - 2018) & Range Rover Velar (from 2017).For locking the engine into the timed position so the engine timing chain can be removed/replaced and the engine timing checked. Should be used with …

These timing tools have been introduced specifically for the 2.5 TDi (1999 - 2008) engines. Kit includes crankshaft locking TDC screw, camshaft locking plates and support guides. The support guides allow the front end to be slid forward giving greater access to the front of the engine. These timing tools have been introduced specifically for the 2.5 TDI (99-08) engines fitted to Audi: A4, A6, A8, Allroad and Volkswagen: Passat, S4 Turbo, S6 V8, Sharan TDI.OEM Codes: 3242, 3458, 3369. Includes crankshaft locking TDC screw, camshaft locking plates and support guides. The support guides allow the front end to be slid forward giving greater access to the front of the engine.

Timing Tool Set for VAG TDi PD* & TDI CR engines, as used by Audi, Seat, Skoda & Volkswagen vehicles from 2000 to 2017. (*except hydraulic damped tensioner). Set includes crankshaft pulley locking tools for round (T10050) sprockets at 12 O'clock position and oval sprockets (T10100) at 1 O'clock position. Timing Tool Set for VAG 2.0L TDi PD DOHC engines fitted to Audi A3/A4/A5/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta and Touran models. Also found on the Ford Galaxy models with ASZ and ASZ1 VAG engines.Includes two versions of Crankshaft Sprocket Locking Tool included. Full OEM reference and guidance notes included with each set. Specifically designed for Belt driven diesel engines.…

The 4083 provides the camshaft locking tools required for the 1200cc 6 and 12 valve engines used in Seat, Skoda and Volkswagen (2002 to 2015). Seat Applications: Cordoba (2002 to 2008), Ibiza (2002 to 2015), Toledo (2012 to 2015).Skoda Applications: Fabia (2002 to 2015), Praktik (2007 to 2015), Rapid (2012 to 2015), Roomster (2006 to 2015). Volkswagen applications include: Fox (2005 to 2012), Polo (2002 to 2014). Engine locking tools for 1.2L, 6 and 12 valve engines. See instructions for engine codes covered.

The IRWIN Marples M2450 cabinet scrapers are made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish. These scrapers have good edge retention but are easily resharpened. Available in the following sizes:MAR2450: 5in Rectangle (flat) 125mm. MAR2451: 6in Rectangle (flat) 150mm.Type: 5in rectangle (flat) 125mm.Additional Information:• Type: Cabinet Scraper• Scraper Width: 125mm

The MarXman Standard Professional Marking Tool has a unique design. With one push, it quickly, easily and clearly marks almost any surface. For jobs with fixing holes up to depths of 45mm. Each pen contains 250+ bursts of removable, fluorescent green pigment and is capable of marking all surfaces including brick, metal, wood, pebbledash, porcelain and ceramic. The perfect drilling companion for electrical, plumbing, building jobs and much more.1 x MarXman Standard Professional Marking ToolAdditional Information:• Colour: Green• Pack Qty.: 1

The Maun Wad Punch Kit is a versatile tool for all your punching needs. Perfect for making precisely shaped gaskets and washers, cutting precise holes and shapes. All you need in one complete set. Punch both inner and outer holes for washers and gaskets. Works on a range of soft materials, including felt, rubber, leather, plastic and cork. Made to last, with a robust construction and rust-proof finish. Chemically blackened handle and punches for long life. The centre punch case has been hardened to HRC 57 for durability. Whilst the punches have been ground to a fine cutting edge, then hardened and tempered to HRC 45 for durability. The handle has been fully heat-treated to withstand hammer or …

The Maun Stationers Punch can punch up to 25 sheets of 80g/m² paper in one go. Easy to use, thanks to a spring stripper and spring return to prevent jamming. Provides a clean punch every time, even when piercing multiple sheets of paper. No more punch jamming in the pierced hole. Built to last, with a robust construction and rust-proof finish. Its precision-ground punch has been case hardened to HRC 57. Detailing on handles provides added grip. Specification: Punch Diameter: 6.4mm (1/4in).Jaw Length: 32mm (1.1/4in).Overall Length: 200mm (8.1/4in).Additional Information:• Type: Pliers

Maun Eyelet Puncher & Fixing Pliers punch through materials and fix eyelets in one operation. No need to buy separate punch and eyelet pliers. Cleanly fix eyelets into a variety of thin materials. The eyelet dies have been case hardened to HRC 57 for durability. Built to last, with a robust pressed steel construction and rust-proof finish. The jaws feature tapered bushes for precision setting of the eyelet dies. Fitted with a long-lasting return spring and zinc-plated handles with detailing for added grip. Use this eyelet puncher to punch and fix eyelets into thin materials such as fabric, leather, canvas, thin plastics and card. Ideal for: arts and crafts by professionals and hobbyists, leather …

These Maun Revolving Punch Pliers are lightweight and easy-to-use. Designed with a revolving drum for quick and easy punch selection. Punches lock firmly in place for assured accuracy and are hardened for increased durability. Features six different punch sizes. Easily select your punch with the rotating drum. Built to last, with a robust construction and rust-proof finish. Fitted with a strong return spring for easy operation. Made from strong but lightweight carbon steel. With zinc-plated handles with detailing for added grip. Ideal for making holes in soft materials, especially leather. Manufactured to Maun&rsquos design in Germany. Comes with a standard 12 months' warranty. Register your …

Maun Shear Nose Soft Wire Cutters for trimming wire ends to equal lengths. Built to last, with a robust construction and rust-proof finish. Comfortable and simple to use, with a high-leverage design for minimal effort when cutting. The machine-ground jaws, case hardened to HRC57 for durability. Fitted with Zinc-plated jaws and handles with detailing for added grip. Originally designed for cutting florist wire. Ideal for: florists and the horticultural industry, hobby and craft sectors for cutting soft wire. Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years. Specification: Length: 100mm.Width: 30mm.Cutting Capacity: Soft Wire 3mm Ø.Additional Information:• …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 22mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Milwaukee Hex Shank Flat Drill Bit for fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4? Hex shank reception for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings for improved cutting performance. Specifications • Cutting Width: 32mm • Length: 160mm • Pack Quantity: 1Features & Benefits• Fast drilling of big diameters • Suitable for drilling in natural hard and softwood and chipboard • Ideal for door locks, morticing, electrical and plumbing work • 1/4? Hex shank reception …

Ideal for heavy duty, precision drilling in soft and hard woods, large section beams, joists, floorboarding, chipboard and plywood. Features & Benefits • Lewis flute design for rapid chip removal • Hexagonal shank for secure grip in jawed chucks Specifications • Diameter: 12mm • Total Length: 230mm • Working Length: 155mm • Shank Reception: 10mm Hex • Pack Quantity: 1

Ideal for heavy duty, precision drilling in soft and hard woods, large section beams, joists, floorboarding, chipboard and plywood. Features & Benefits • Lewis flute design for rapid chip removal • Hexagonal shank for secure grip in jawed chucks Specifications • Diameter: 16mm • Total Length: 230mm • Working Length: 155mm • Shank Reception: 11mm Hex • Pack Quantity: 1

Ideal for heavy duty, precision drilling in soft and hard woods, large section beams, joists, floorboarding, chipboard and plywood. Features & Benefits • Lewis flute design for rapid chip removal • Hexagonal shank for secure grip in jawed chucks Specifications • Diameter: 20mm • Total Length: 230mm • Working Length: 155mm • Shank Reception: 11mm Hex • Pack Quantity: 1

Ideal for heavy duty, precision drilling in soft and hard woods, large section beams, joists, floorboarding, chipboard and plywood. Features & Benefits • Lewis flute design for rapid chip removal • Hexagonal shank for secure grip in jawed chucks Specifications • Diameter: 22mm • Total Length: 230mm • Working Length: 155mm • Shank Reception: 11mm Hex • Pack Quantity: 1