Other Hand Tools

Permanent markers designed for deep holes, tight spaces and hard-to-reach spots. The nibs on Pica deep hole markers can be swivelled to extend their working life. To do this, move the telescopic tip back with pincers. Tear out the nib wick and turn through 180°. Then insert the nib wick again and move the telescopic tip forward Specifications • Nib Colour: BlueFeatures & Benefits• Marks on almost all kinds of dry surfaces • Convenient quiver cap with special clip for perfect one handed handling • Permanent alcohol-based ink, removable from glossy surfaces with alcohol and other usable solvents • Works up to 24 hours uncapped • Extended tip made of stainless …

Useful & compact marking kit primarily designed for plumbers but also ideal for trades like tilers, electricians, metalworkers and locksmiths. Suitable for marking multiple materials, including timber, metal, bricks, tiles, glass and plastics.Features & Benefits• Velcro fastening case • With failover for refill sets • Single packaging with extractable plastic hang tagContents• 3030 Pica-Dry Longlife Automatic Pen • 4030 Pica-Dry Refill Set Graphite for All 2B • 4040 Pica-Dry Refill Set Water Jet Resistant, Blue, White, Green • 150/46 Pica-Ink Deep Hole Marker, Black • 532/52 Pica Classic INSTANT-WHITE Pen

Useful & compact marking kit primarily designed for carpenters but also ideal for trades like roofers, stone masons and bricklayers. Suitable for marking multiple materials, including timber and wood based materials (wet or dry), tiles, glass and plastic pipes.Features & Benefits• Velcro fastening case • With failover for refill sets • Single packaging with extractable plastic hang tagContents• 6060 Pica BIG Dry Longlife Construction Marker • 6045 Pica BIG Dry Refill Set for All, Graphite 2B, Red, White • 3030 Pica-Dry Longlife Automatic Pen • 4030 Pica-Dry Ersatzminen-Set Graphit for All 2B

Features:- Practical Set For Marking- Suitable For Carpenters, Joiners, Fitters Or Interior Decorators- Compact Bag With Velcro Fastener- Failsafe For Mines- Contains A Pica Dry Longlife Automatic Pencil, Pica Fine Dry Longlife Automatic Pencil 0.9, Pica Classic Instant-White Pen And Three Sets Of Refills.Specifications:- Waterproof: YesGeneral:- Length (Mm): 220- Width (Mm): 150- Depth (Mm): 45- Weight (G): 407

This Priory Scriber has two points, one bent at 90 degrees giving improved access in confined spaces. It has a knurled body to give a positive finger grip and sharp ground points heat treated to give a long life. Specification: Length: 177mm (7in). Additional Information:• Type: Double Ended• Size: 177mm

This Priory 127 Engineers Scriber is a one piece constructed scriber for marking all metal. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specifications: Size: 125mm (5 in).Additional Information:• Type: Pocket• Size: 125mm

This Priory 129 Combination Scriber is double ended with a point and a knife edge. The knife edge is ideal for marking wood, plastic and laminates, and can also be used for scraping surfaces clean. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specification: Size: 165mm (6.1/2in).Additional Information:• Type: Double Ended• Size: 165mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life. Walleted set of 4 containing one of each of the following sizes. 1/16, 3/32, 1/8, and 3/16 in. Length 4 in

Priory 66 Series Nail Punch with a square head that provides a large striking area, it also stops the punch from rolling off the bench. Its precisely knurled body provides a firm grip. Designed to drive nail heads below the surface of the wood.Set of 4 in wallet. 1 of each 1/16in, 3/32in, 1/8in, 3/16in. Length 4inAdditional Information:• Length: 100mm (4in)• Tip: Mixed Set

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).A set of 6 hexagonal bodied punches with extra long pins. Walleted as a set containing one of each of the following sizes. 1/8in, 5/32in, 3/16in, 7/32in, 1/4in and 5/16in.Additional Information:• Type: Set• Point Diameter: 1/8-5/6in• Length: Mixed Set• Pin Length: 63mm (2.1/2 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Walleted set of 6 containing one of each of the following sizes. 1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.Additional Information:• Type: Set• Point Diameter: 1/16-3/8in• Length: Mixed Set

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Walleted set of 9 containing one of each of the following sizes. 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.Additional Information:• Type: Set• Point Diameter: 1/16-3/8in• Length: Mixed Set

The Priory 271 Automatic Centre Punch aids accuracy through the single handed operation which alleviates the need for a hammer. Depth of impression can be adjusted via the screw cap. Precision manufactured. Specification Length: 125mm (5in)Additional Information:• Length: 125mm (5in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.14 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 13mm belt punch is intended for cutting soft materials such as leather. Specifications:Type: No.14. Size: 13mm (1/2in).Additional Information:• Type: No.14• Size: 13mm (1/2in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.8 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 6.5mm belt punch is intended for cutting soft materials such as leather. Specifications:Type: No.8. Size: 6.5mm (1/4in).Additional Information:• Type: No.8• Size: 6.5mm (1/4in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.22 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This 25mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.22.Size: 25mm (1in).Additional Information:• Type: No.22• Size: 25mm (1in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.6 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 5mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.6.Size: 5mm (3/16in).Additional Information:• Type: No.6• Size: 5mm (3/16in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.18 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This 19mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.18.Size: 19mm (3/4in).Additional Information:• Type: No.18• Size: 19mm (3/4in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.12 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 10mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.12.Size: 10mm (3/8in).Additional Information:• Type: No.12• Size: 10mm (3/8in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.10 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 8mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.10.Size: 8mm (5/16in).Additional Information:• Type: No.10• Size: 8mm (5/16in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials such as leather.This Priory No.16 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 16mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.16.Size: 16mm (5/8in).Additional Information:• Type: No.16• Size: 16mm (5/8in)

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. 10mm (3/8 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 10mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. 12mm (1/2 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 12mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. 3mm (1/8 in)Contents: A to Z plus & (and)Additional Information:• Character Height: 3mm