Other Hand Tools

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.The Monument MON1377 1377W Drain Testing Plug comes with the following specifications:Size: 75mm (3 inch).Capable of sealing against pressures of up to 2.24 bar / 33 psi.Additional Information:• Type: Drain Test Plug• Size: 75mm

This Monument 3351G Drill Snake is encased in a plastic tube which remains stationary as the snake is rotated by the electric drill. It is fitted with an automatic clutch slipping if the boring head gets caught in the line.Effective length: 4.5m (15ft).Additional Information:• Type: Accessory• Size: 1/4in• Length: 15ft

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).Additional …

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.Diameter range: 48-62mm. Maximum allowable back pressure: 37psi (2.50bar).1/2 in BSP outlet.Additional Information:• Type: Drain Test Plug• Size: 50mm

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 503D Spare Flat Tap Reseater Cutter 19mm (3/4in)Additional Information:• Size: 3/4in• Type: Flat Cutter

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 505J Spare Flat Tap Reseater Cutter 22mm (7/8in)Additional Information:• Size: 7/8in• Type: Flat Cutter

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 507P Spare Flat Tap Reseater Cutter 25mm (1in)Additional Information:• Size: 1in• Type: Flat Cutter

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1457Q Medium Force Cup Plunger 100mm (4in)Additional Information:• Diameter: 100mm

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1458T Large Force Cup Plunger 120mm (4.3/4in)Additional Information:• Diameter: 120mm

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1456N Small Force Cup Plunger 75mm (3in)Additional Information:• Diameter: 75mm

Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium. Use with propane/MAPP® gas. The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button. The flame size can be changed via an adjustable valve. An ergonomic hand grip ensures comfortable use. Fits CGA600 Cylinder.Additional Information:• Type: Gas Torch

Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube. Made in Britain.The Monument MON48GTG 48Gtg Gas Test Gauge has the following specifications: Capacity: 120mb.Size: 1200mm (48in).Additional Information:• Type: Gas Test Gauge• Size: 1200mm (48in)

Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube. Made in Britain.Monument 257C Gas Test Gauge. Size: 300mm (12 in).Capacity: 30 Millibar.Additional Information:• Type: Gas Test Gauge• Size: 300mm (12in)

Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube. Made in Britain.Monument 258F Gas Test Gauge. Size: 600mm (24 in).Capacity: 60 Millibar.Additional Information:• Type: Gas Test Gauge• Size: 600mm (24in)

Monument Gas Test Gauge is made from tough plastic. Used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level. Plastic U Tube. Made in Britain.Monument 259I Gas Test Gauge has the following specification: Size: 900mm (36in).Capacity: 90 Millibar.Additional Information:• Type: Gas Test Gauge• Size: 900mm (36in)

Monument Glass Fibre Plumbers Mat is an asbestos free, heavy-duty and professional quality mat that provides protection in most soldering and brazing work. The mat resists temperatures up to 600° C, and does not present any of the hazards associated with asbestos materials. Made from glass fibre fabric. Size: 300 x 250mm (12 x 10in)Additional Information:• Material: Fibreglass• Size (mm): 300 x 250• Size (in): 12 x 10

Monument one-piece Plunger, in black, for clearing sinks, basins, and bath wastes is both handy and popular. Exclusively patented bellows design allows more cubic centimetre displacement than traditional force cups. Specifications: Size: 100mm (4in).Length: 325mm (13in).Additional Information:• Diameter: 100mm

Monument Hardwood straight pattern chase wedge fitted with ferruled top for chasing roofing materials.Monument 713Q Chase Wedge. Width: 50mm (2in).Additional Information:• Type: Chase Wedge• Size: 50mm (2in)

Monument Hardwood straight pattern chase wedge fitted with ferruled top for chasing roofing materials.Monument 715W Chase Wedge.Size: 75mm (3 in).Additional Information:• Type: Chase Wedge• Size: 75mm (3in)

The Monument Hydro-jet Pump safely provides the explosive power of a water jet to unblock sinks, baths, showers, toilets, and drains. First you fill the unit with water then hold the unit over the waste and pump down (or hit) the handle to create a powerful water jet to help clear any blockage. To clean the MON1452 simply just flush with clean water. Comes with 3 adaptors for sinks, drains and toilets. Size: 35cm x 7cm x 7cm. Additional Information:• Diameter: 70mm

This Monument Suction Plunger is ideal for clearing WC pan wastes and gullies. It is made from soft, flexible rubber and has a wooden T-handle. Rubber Diameter: 140mm (5.1/2in)Overall Length: 445mm (17.1/2in)Additional Information:• Diameter: 140mm

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting. Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft. Pack Quantity: 2Additional Information:• Shape: Standard• Length: 125mm (5in)

The Monument Heavy-Duty Manhole Cover Lift Keys have rectangular shaped ends (lugs) and a triangular handles that provide a positive grip whilst allowing easy access for gloved hands. They have been zinc plated for increased protection against corrosion. Pack Quantity: 22 x Monument MLK06 Manhole Lifting Keys 150mm (6in)Additional Information:• Shape: Standard• Length: 150mm (6in)

The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types. Pack Quantity: 2Additional Information:• Shape: Side Entry• Length: 215mm (8.1/2in)