Other Hand Tools

The Marshalltown M192 Cement Edger is designed to give a good finish on steps, and verges, has a stainless steel blade with sturdy mountings. The cement edger is fitted with a comfortable DuraSoft® handle. Specification: Size: 250 x 100mm (10 x 4in).Straight Ends with 10mm (3/8 in) Radius.Additional Information:• Blade Size: 10 x 4in• Handle: Soft Grip

The Marshalltown M23RD Curved Inside Corner Trowel has a one-piece, flexible stainless steel blade with rounded corners offering excellent shaping results. Set at an 103° angle, flexing to form a perfect 90° corner during use. Fitted with a durable, lightweight aluminium mounting and DuraSoft® handle providing a comfortable grip and improved tool control. Specification: Size: 125 x 90mm (5 x 3.5in)Additional Information:• Type: Internal Corner• Blade Size: 5 x 3.5in• Handle: Soft Grip

This Marshalltown Flooring Shear cuts vinyl tile, plank, laminate, engineered wood, and more. It allows you to cut where you work without dust, noise, or electricity. The shear comes with a moveable fence for 90° and 45° cuts. It also has a built-in ruler for accurate cuts. Specification: Max. Cutting Width: 330mm (13in)Max. Cutting Thickness: 12.7mm (1/2in)Additional Information:• Type: Flooring Cutter

This Marshalltown Plaster Pan is used to hold material while you work, designed to make it easy to clean trowels, and not have material get stuck in the corners. It is made of galvanised steel construction and has tapered ends, and sides with mud tight seams. The sides of the pan are sheared to clean knives easily.Size: 300 x 75mm (12 x 3 in).Additional Information:• Material: Galvanised Steel• Length: 300mm

This Marshalltown Plaster Pan is used to hold material while you work, designed to make it easy to clean trowels, and not have material get stuck in the corners. It is made of hard-wearing plastic with a hang tab, and is equipped with two metal wiping blades. The pan will resist chemicals and temperature change.Size: 325 x 75mm (13 x 3 in).Additional Information:• Material: Plastic• Length: 325mm

The Marshalltown MAKD22 Adjustable Squeegee Trowel has a DuraSoft® blade moulded to a high impact backing for consistent finishes and long-life. The pitch can be adjusted 35° in either direction for ceilings and tight corners. Fitted with a threaded DuraSoft® handle with a metal ferrule and hanging hole.Additional Information:• Type: Adjustable• Blade Size: 22in• Handle: Soft Grip

The Marshalltown Margin Trowel is primarily used to tidy cement and plaster edges. Forged from one piece of high-grade steel. Fitted with a hardwood handle and polished steel ferrule. Otherwise known as a window trowel and designed for cementing and finishing around windows and other confined areas.1 x Marshalltown 54 Margin Trowel Wooden Handle 125 x 38mm (5 x 1.1/2in)Additional Information:• Type: Margin• Blade Size: 5 x 1.1/2in• Handle: Wood• Blade Material: Steel

The Marshalltown Stainless Steel Joint Knife is corrosion and wear resistant. It has an ergonomic with optimum weight balance to ensure reduced user fatige. The product handle also has a large hole in for easy hanging storage and can double up as a convenient hammer end.1 x Marshalltown Stainless Steel Joint Knife 100mm (4in).Additional Information:• Type: Joint Knife• Size: 100mm (4in)

Made to the same high standards as regular plasterers trowels, blades cross-ground to maintain shape, alloy mountings fully heat treated for strength, polished and machine finished ensures perfect end-to-post fit.Hardened steel rivets attach blades to the mountings. Size: 280 x 115mm (11 x 4.1/2in).Notches: 3/16in 'V' Shaped.Handle: Wooden.Additional Information:• Notch Style: V• Notch Size: 3/16in• Blade Size: 11 x 4.1/2in

Made to the same high standards as regular plasterers trowels. Blades cross-ground to maintain shape. Alloy mountings fully heat treated for strength. Polished and machine finished to ensure perfect end-to-post fit.Hardened steel rivets attach blades to the mountings.DuraSoft® handle. Size: 280 x 115mm (11 x 4.1/2in).3/16in 'V' shaped notches.Additional Information:• Notch Style: V• Notch Size: 5mm• Blade Size: 11 x 4.1/2in

Made to the same high standards as regular plasterers trowels, blades cross-ground to maintain shape, alloy mountings fully heat treated for strength, polished and machine finished ensures perfect end-to-post fit.Hardened steel rivets attach blades to the mountings. Size: 280 x 115mm (11 x 4.1/2in).Notches: 1/4in Square.Handle: Wooden.Additional Information:• Notch Style: Square• Notch Size: 1/4in• Blade Size: 11 x 4.1/2in

The Marshalltown PermaFlex Plasterer Trowels ensure a perfect finish every time. They have a high grade, ultra flexible, 0.3mm stainless steel blade with an xtralite aluminium alloy mounting and stainless steel rivets. The blade has been bonded and taped for increased blade security. It has been designed to flex for easier final smooth and finishing of multi finish, skimming and board finish plasters. Fitted with a resilient DuraSoft® handle that provides a soft feel, reduces fatigue, and offers excellent durability. Made in the USA.1 x Marshalltown PermaFlex Plasterer Trowel DuraSoft® 13inAdditional Information:• Pre-Worn: No• Blade Size: 13 x 4.5/16in• Handle: Soft Grip…

The Marshalltown PermaFlex Plasterer Trowels ensure a perfect finish every time. They have a high grade, ultra flexible, 0.3mm stainless steel blade with an xtralite aluminium alloy mounting and stainless steel rivets. The blade has been bonded and taped for increased blade security. It has been designed to flex for easier final smooth and finishing of multi finish, skimming and board finish plasters. Fitted with a resilient DuraSoft® handle that provides a soft feel, reduces fatigue, and offers excellent durability. Made in the USA.1 x Marshalltown PermaFlex Plasterer Trowel DuraSoft® 18inAdditional Information:• Pre-Worn: No• Blade Size: 18 x 4.5/16in• Handle: Soft Grip…

Philadelphia pattern brick trowel, forged from a single piece of carbon steel and heat-treated for strength and durability. Made from one-piece forged and heat treated high carbon steel Taper ground and polished Handle rise set for correct hang and balance Comfortable durasoft handle Strengthened impact area Philadelphia pattern

Marshalltown 19 Series Wooden handled Philadelphia pattern brick trowel with the blade being manufactured from a single piece of high-grade steel, tempered and taper ground with a straight post and carefully set handle angle. The handle is securely attached with a polished steel ferrule, straight shouldered Philadelphia pattern blade. These trowels have been re-engineered and are produced on the most modern forging equipment available. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels, straight shouldered Philadelphia pattern blade.Wooden handle Size. 250 x 125mm (10 x 5 in).

Marshalltown M1911D Philadelphia Brick Trowel With Durasoft Handle 11" The Marshalltown M1911D brick trowel is perfect for levelling, spreading and shaping mortar or concrete. It has been forged from a single piece of high carbon steel, then heat-treated for maximum strength and durability. Its Philadelphia pattern allows more mortar to be placed on the blade. Features:
- Philadelphia Pattern - The heel has sharp angles
- Forged from a single piece of high carbon steel, then heat-treated for strength and durability
- The blade is taper ground and polished
- Handle rise is set for correct hang and balance
- Impact area is extra strong Specification:
- Size: 279 x 140mm (11 x 5 1/2")…

Marshalltown 19 Series Wooden handled Philadelphia pattern brick trowel with the blade being manufactured from a single piece of high-grade steel, tempered and taper ground with a straight post and carefully set handle angle. The handle is securely attached with a polished steel ferrule, straight shouldered Philadelphia pattern blade. These trowels have been re-engineered and are produced on the most modern forging equipment available. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels, straight shouldered Philadelphia pattern blade.Blade length 280 x 140mm (11 x 5 1/2 in)Handle type wooden

The Marshalltown 19 Series Philadelphia Pattern Brick Trowels are one-piece forged from highest carbon steel then heat-treated for strength and durability. The handle rise is set for correct hang and balance. The blade is taper ground and polished. The DuraSoft® handle incorporating an integral finger guard, provides a soft feel, reduces fatigue and offers excellent durability. Philadelphia Pattern trowels are better suited for laying blocks because they allow for more mortar to be placed on the blade.Marshalltown 19D Philadelphia Pattern Brick Trowel Durasoft® Handle 300mm (12in) Size: 300 x 150mm (12 x 6in).

Marshalltown 19 Series Plastic handled Philadelphia pattern brick trowel with the blade being manufactured from a single piece of high grade steel, tempered and taper ground with a straight post and carefully set handle angle. The handle is securely attached with a polished steel ferrule, straight shouldered Philadelphia pattern blade. These trowels have been re-engineered and are produced on the most modern forging equipment available. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels, straight shouldered Philadelphia pattern blade.Philadelphia Pattern with plastic handle.Size. 280 x 140mm (11 x 5 1/2 in)

Marshalltown 19 Series Plastic handled Philadelphia pattern brick trowel with the blade being manufactured from a single piece of high grade steel, tempered and taper ground with a straight post and carefully set handle angle. The handle is securely attached with a polished steel ferrule, straight shouldered Philadelphia pattern blade. These trowels have been re-engineered and are produced on the most modern forging equipment available. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels, straight shouldered Philadelphia pattern blade.Plastic handle.Size. 300 x 150mm (12 x 6 in).

Marshalltown MXS series Plasterers finishing trowels have an aluminium alloy mounting and are very light, but as strong as steel. The flexible blade is of the highest grade spring steel, tempered, ground and polished and the blade is fastened to the mounting with ten hard steel rivets. The curved wooden handle is held firmly by a nut and washer.Plasterer's shaped wood handle.Size. 280 x 115mm (11 x 4 1/2 in).Additional Information:• Pre-Worn: No• Blade Size: 11 x 4.3/4in• Handle: Wooden

Marshalltown MXS series Plasterers finishing trowels have an aluminium alloy mounting and are very light, but as strong as steel. The flexible blade is of the highest grade spring steel, tempered, ground and polished and the blade is fastened to the mounting with ten hard steel rivets. The curved wooden handle is held firmly by a nut and washer.Plasterer's shaped wood handle.Size 290 x 115mm (11 1/2 x 4 1/2 in).Additional Information:• Pre-Worn: No• Blade Size: 11.1/2 x 4.3/4in• Handle: Wooden

Marshalltown MXS series Plasterers finishing trowels have an aluminium alloy mounting and are very light, but as strong as steel. The flexible blade is of the highest grade spring steel, tempered, ground and polished and the blade is fastened to the mounting with ten hard steel rivets. The curved wooden handle is held firmly by a nut and washer.Plasterer's shaped wood handle.Size 300 x 125mm (12 x 5 in).Additional Information:• Pre-Worn: No• Blade Size: 12 x 5in• Handle: Wooden

The Marshalltown Aluminium Plasterer's Hawk is made from heavy gauge hard-rolled aluminium with smooth straight edges, rounded corners and a 95mm (3.3/4in) flange with extended hub that is threaded for the handle. Fitted with a detachable 125mm (5in) DuraSoft® handle. Also supplied with a sponge rubber callous preventer.1 x Marshalltown M2D Aluminium Plasterers Hawk DuraSoft® Handle 338 x 338mm (13.5 x 13.5in)Additional Information:• Size: 13.5 x 13.5in