Other Hand Tools

Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut. Monument Plastic Pipe Cutter. Maximum Pipe Size 60mm.

Monument Pipe Cutter is a high quality tool for use by professional and DIY Plumbing Installers, heating engineers, and maintece staff. It assures a square even cut and all parts liable to wear are heat-treated. For sizes 4mm up to 22mm (copper tube).

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used. Copper Pipe Cutters Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Type 265B and 266E are supplied with spare cutter in the fluted handle. Cutter wheels for Stainless Steel are available separately (284I)

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used. Copper Pipe Cutters Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Type 265B and 266E are supplied with spare cutter in the fluted handle. Cutter wheels for Stainless Steel are available separately (284I)

High quality adjustable, copper pipe cutter tool that ensures a square even cut.All parts liable to wear are heat treated.For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.It also has an integrated pipe-deburrer. No.1. Capacity 4 to 28mm. Spare wheel number MON273. Made in Britain.Monument pipe cutter number 3 is a high quality tool for use by professional and DIY plumbing Installers, heating engineers, and maintenance staff. This copper pipe cutter assures a square even cut. All parts liable to wear are heat treated. Capacity: Copper Pipe: 25-82mm, Plastic Pipe: 25-81mm. Spare wheel number MON273.Additional Information:• Suitable For: Copper• …

The Monument Professional Power Plunger comes with 3 adaptors which should fit most shower, bath, basin, and bidet wastes. When pumping the MON2161X unit in situ, it will build up pressure which is then activated via the trigger to blast away the blockage. When the trigger is pulled quickly the compressed air is discharged, at once, causing a shock wave through the water to dislodge the blockage within the waste, even if it is past the trap, down the pipework and around several bends.Additional Information:• Diameter: Multi

The Monument GRIP+ Radiator 0-Shape Balancing Tool fits most radiator valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.1 x Monument 4505R GRIP+ Radiator 4mm 0-Shape Balancing ToolAdditional Information:• Type: Balancing Tool

The Monument GRIP+ Radiator 0-Shape Balancing Tool fits most radiator valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.4506U GRIP+ Radiator 5mm 0-Shape Balancing Tool.Additional Information:• Type: Balancing Tool

These Monument Radiator Bleed Keys are used for releasing the excess air trapped in a radiator.They each have a clock key design for convenient attachment to a keyring. Specification: Pack Quantity: 2.Additional Information:• Type: Key

This Monument Radiator Valve Spanner is used to facilitate fitting and removal of standard and thermostatic radiator valves. The 2065F is made in Britain.

The Monument ratchet handle to suit automatic and autocut pipe cutters. Ideal for use when space is limited it fits where hands or pliers cannot. Made from bright zinc plated stock. The Monument MON15R suit 15PC Automatic Pipe Cutter and 1715 pipe cutters.

The Monument ratchet handle to suit automatic and autocut pipe cutters. Ideal for use when space is limited it fits where hands or pliers cannot. Made from bright zinc plated stock.The Monument MON22R suits 22PC Automatic Pipe Cutter and 1722 pipe cutter. Ideal for use when space is limited.Additional Information:• Type: Ratchet Handle

This Monument pump is for use on Schrader valves, and they are used for inflating flexible plugs and universal flexible plugs which are fitted with a Schrader valve. Note: inflate flexible plugs slowly, stop inflating when seal is achieved.Additional Information:• Type: Valve Pump

Monument galvanised steel wire with gripping handle for clearing sink, shower and bath wastes.Monument 909L Waste Cleaner. Size: 6 x 1.8m (1/4 in x 6ft).Additional Information:• Type: Manual• Size: 1/4in• Length: 6ft

Monument galvanised steel wire with gripping handle for clearing sink, shower and bath wastes. Size 6mm x 3.6m (1/4in x 12ft)

Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint. Available in a variety of sizes: 15, 22, 28 and 15 & 22mm.Monument 131W Socket Forming Tool. Size: 15mm.Additional Information:• Size: 15mm

Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint. Available in a variety of sizes: 15, 22, 28 and 15 & 22mm.Monument 133C Socket Forming Tool. Size: 22mm.Additional Information:• Size: 22mm

The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 6m (20ft).Diameter: 6.35mm (1/4in).Additional Information:• Type: Manual• Size: 1/4in• Length: 20ft

The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 7.5m (25ft).Diameter: 6.35mm (1/4in)Additional Information:• Type: Manual• Size: 1/4in• Length: 25ft

SV-F Super-Vee Power Drain Cleaner for kitchen, bathroom, laundry drains and pipes from 11/4. up to 3 inch. Slide action chuck built into the grip shield which slides back to grip, allowing the cable to work through a stoppage and forward to disengage. Automatic adjustment for different size cables. Double insulated motor with reverse and variable speed trigger switch. Drum Cable maximum capacity - 35ft. x 3/8in. or 50ft. x 5/16in. Cable included 25ft.x1/4in. 3193Y(25HE1) with Basin Plug Head. Weight 9 Kg.Voltage 110VAdditional Information:• Type: Powered• Size: 1/4in• Length: 25ft

SV-F Super-Vee Power Drain Cleaner for kitchen, bathroom, laundry drains and pipes from 11/4. up to 3 inch. Slide action chuck built into the grip shield which slides back to grip, allowing the cable to work through a stoppage and forward to disengage. Automatic adjustment for different size cables. Double insulated motor with reverse and variable speed trigger switch. Drum Cable maximum capacity - 35ft. x 3/8in. or 50ft. x 5/16in. Cable included 25ft.x1/4in. 3193Y(25HE1) with Basin Plug Head. Weight 9 Kg.Voltage 240VAdditional Information:• Type: Powered• Size: 1/4in• Length: 25ft

The Monument 2166M TRV Tail Driver Fitting Socket has been designed to enable fast removal and installation of radiator valve tails and will fit most makes and sizes. The socket can be used with a either a cordless drill chuck or ratchet with 10mm hex socket.Additional Information:• Type: Tail Driver Fitting Socket

The Monument ;796N Telescopic Inspection ;Mirror ;extends up to 330mm (13in), making it ideal for inspecting the underside of cars and difficult to reach places. The mirror is attached with a double ball joint, allowing the mirror angle to be adjusted. Specification Fully Extended Length: ;330mm (13in).Mirror ;Diameter: ;50mm.

The Monument 799W Telescopic Inspection Mirror combines a magnetic end and a 37mm diameter mirror with double ball joint, allowing the mirror angle to be adjusted. Its telescopic shaft extends up to 600mm (24in). It also features a handy pocket clip for convenient carrying. Specification Mirror Diameter: 37mm.