Other Hand Tools

Oil filter wrench 86mm x 16 flutes for BMW and Volvo S40 and S80.Equivalent to OEM 11 9 24088mm x 16 flutes (See also 4234) (88mm point to point/86mm flat to flat)For Eco filters on Volvo S40 & S80 and BMW N40, N42, N45, N46, N523/8" drive0

A set of popular keys for draining differentials, sumps, axles and gearboxes on most modern vehicles. A set of popular keys for draining differentials, sumps, axles and gearboxes on most modern vehicles.Includes 10mm (F) square and 10mm triangular in 3/8"D.Hex 8 | 9 | 10 | 12 | 14 | 17mm.Square 7 | 8 | 11 | 13 metric and 5/16" | 3/8" imperial.Supplied in a blow mould case.

Oil Filter Wrench / Tool Steel / Quantity 15 Piece

Long reach compression test adaptor for deep seated spark plug holes in V6 and 16 valve engines such as Vauxhall/Opel Ecotec and Ford Zetec.For deep seated spark plug ports.For V6 and 16 valve engines.Suitable for Vauxhall/Opel Ecotec and Ford Zetec.235mm overall length.Designed to fit in a head with a 14mm thread.

An aluminium oil filter wrench in 1/2"Drive. Aluminium oil filter wrench.74mm x 14 flutes.Suitable for Purflux | Grove filters fitted to: Audi | Volkswagen | BMW | Citron | Peugeot | Ford | Fiat | Lancia | Mazda | Mercedes-Benz | Nissan | Vauxhall/Opel | Porsche | Renault | Suzuki | Toyota.1/2"D.Removes oil filter without damage to the filter housing.

For left and right hand threaded pistons. Suitable for most 3/8"D wind-back adaptors and pin type adaptors.A pneumatic/air tool for brake caliper piston rewind.Suitable for pin drive or 3/8"D.For left and right handed threaded pistons.Time saver.Full adaptor range available. Supplied with a 3/8"D to 2 pin magnetic adaptor to fit adaptors in 3991.

This kit brings together three of the most useful tensioner locking pins in one kit. These pins are used to lock serpentine belts and cambelts fitted to many of the VAG engines.Set of 3 locking pins for holding the tension on the cambelt and serpentine (auxiliary) belts on VAG enginesOEM Nos. T10115, T40011 - timing belt tension pins and T10060/A - serpentine tension pinUse on tensioners fitted to 1.4/1.9/2.5 TDI PD/TFSIPetrol or dieselPopular tools

This timing tool kit is specifically designed for Fiat chain driven engines fitted to the Vauxhall/Opel | Saab 1.3 CDTi and 1.9 CDTi belt driven models.1.9 CDTi belt driven engines fitted to Saab 9-3 (2004-2009) and 905 (2003-2020). Saab engine codes Z19DT | Z19DTH1.9 CDTi belt driven engines fitted to Astra-H, Vectra-C, Signum, Zafira-B with Z19DT and Z19DTL engines1.3 CDTi chain driven engines fitted to Agila, Corsa-C, Combo-C, Astra-H, Tigra-B, Meriva with Z13DT, Z13DTH, Z13DTJ enginesSupplied in foam tray to ensure all tools are removed from engine after use. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing (Laser Tools Recommends Molybdenum Disulphide …

Oil Filter Wrench

Tensioner Pulley Wrench 32mm for adjusting the Cambelt tensioning pulley on Audi and Volkswagen 2.5 TDi /Sdi engines32mmFor adjusting the cam belt tensioning pulleySuitable for Audi and Volkswagen 2.5 TDI engines and some VolvosOEM 3355Specialist tool

Cup style oil filter wrench specifically designed for Mercedes-Benz V6 & V8 Cdi engine with engine code 642-920.Cup style oil filter wrench specifically designed for Mercedes-Benz. Also suitable for Chrysler 300c 3litre diesel 2006

This simple tensioner cover extends the use of Part No 4068 to include later F9Q engine codesCovers many models including:- Kangoo / Clio II / Megane II / Scenic I / Laguna / Laguna I / Espace III / Espace IV, Avantime, Trafic II, Master IIOEM MOT 1705Use in conjunction with Part No 4068F9Q engine codesTime saver

This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles. The tool works with an air compressor at 4-7 bar and on a maximum diameter of 110mm. Full instructions are supplied and a video clip is featured on our website with the compliments of Youtube.Designed for stretching flexible CV boots on to the drive shaft assemblies of automotive vehicles.For use with an air compressor.Works at 4-8 bar and on a maximum diameter of 115mm.Full instructions supplied.Video demonstration available on YouTube and our website.

This robust Slide Hammer with 5/8" UNF thread and 10lb of force can be used with a variety of tools and for many applications including the removal of stubborn diesel injectors etc. Useful with Laser's Diesel Injector Set (Part No 4760).Robust slide hammer.5/8 UNF thread.10lb Hammer.Can be used with a variety of tools including the removal of diesel injectors.Useful with Laser's Diesel Injector Adaptor Set - Part No 4760.

Wheel Bearing Tool

A crankshaft turning tool for Ducati motorcycles has now been added to the Motorcycle tool range.Applications: Ducati Monster | Multistrada 600 | 620 | 748 | 750 | 800 | 848 | 851 | 888 | 900 | 916 | 996 | 998 | 999 | 1000 | 1098 | 1198.Engines built from 1990 - present.Engine Sizes: 750 | 900 | 916cc.Invaluable for turning the engine while setting the valve clearances.Time Saver.

A specifically designed oil filter wrench for Renault, Peugeot, Ford and Seat.80mm x 14 flutes.For removing canister oil filters.Application: Renault | Peugeot | Seat | Ford.Essential tool.3/8"D.

Part of the motorcycle range this racer axle wrench fits Yamaha | Honda | KTM and Kawasaki motorcycles.Manufactured from S45c steel.Hardened and chrome plated.Light and easy to carry.Double sized.Fits Yamaha | Honda | KTM | Kawasaki.

Oil filter housing removal on Ford 2.2 Duratorq diesel engines (DW12C) from 2010 onwards.Application: Removal of oil filtersApplications include Ford Duratorq 2.0 TDCi (DW10C) from 2010, 2.2 TDCi (DW12C) from 2010 Citroen & Peugeot 2.2 HDI (DW12C) from 2010, 2.0 HDI (DW10C)from 2009, Jaguar XF 2.2D from 2012 OEM 303-157927mm Bi Hex x 1/2"D

An essential socket set for use on Electric and Hybrid vehiclesVDE/GS approved, insulated socket setFor use on Electric and Hybrid vehiclesIncludes 3/8"D ratchet with quick release function and 150mm and 250mm extension barsSocket Sizes: 6mm/7mm/8mm/9mm/10mm/11mm/12mm/13mm/14mm/15mm/16mm/17mm/18mm/19mmIEC rated to 1000v

A specialist 4 pin socket for the front wheel bearing on Suzuki JimnySpecially designed for the front wheel bearingsApplication: Suzuki Jimny1/2"Dselected steelEssential service tool

Slide hammer 5lbs (2.2 kilo)Slide hammer 5lbs (2.2kilos approx)Chromed finishThread size 5/8"UNF 18tpi (Complete with 7/16" x 14tpi adaptor)T-bar functionEssential bodyshop and mechanical workshop tool

The practical SUPER V multi-tool is specially engineered for today´s modern bicycles.The tool is characterized by a universal, low-profile, high-performance and lightweight design.It is equipped with meticulously machined bits with special black Anti-Corrosion.The tool has ergonomic forged aluminum side plates with a quick link holder.Cast stainless steel chain breaker with integrated spoke wrenches:8/10mm wrench, 4 spoke wrenches.Multi-function bit:Caliper wedge, rotor truing tool, bottle opener

The V Pro bike multi tool series includes a refined collection of tools developed for today´s modern bikes.Each model is designed and manufactured in-house and engineered to efficiently repair most road or trailside mechanicals.The machined steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance.Compact and versatile, this mini tool are built to last and designed to efficiently get you back on the road or trail.