Other Hand Tools

The Monument Automatic Pipe Cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any of the strain. The pipe cutter is easy to use, it cuts once the gate of the tool is closed over the pipe, and allows cutting in two directions. To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel. Replacement Wheel Number MONW15PC.Monument Automatic Copper Pipe Cutter. Size: 22mm.Additional Information:• Type: Pipe Cutter• Capacity: 22mm• Copper: Y

Monument Bossing Stick used for forming lead into shapes on roofs and lead topped bay windows.Made from Beechwood.Additional Information:• Material: Beechwood• Type: Bossing Stick

Lead Dresser specially designed for use on sheet lead, copper, zinc and aluminium Manufactured from economically priced beech timber Made with sufficient lift to clear the users knuckles

Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 735G No.3 Beechwood Lead Dresser.Face: 55 x 190mm (2 1/4 x 7/1/2 in).Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 55 x 190

Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 736J No.4 Beechwood Lead Dresser.Face: 60x200mm (2 3/8 x 8 in).Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 60 x 200

Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 737M No.5 Beechwood Lead Dresser.Face: 75 x 225mm (3 x 9 in).Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 75 x 225

Monument setting in stick, designed for the moulding and shaping of lead sheet.Made from Beechwood.Additional Information:• Material: Beechwood• Type: Setting In Stick

Using Monument Hand Bellows, air may be carefully pumped into the pipe. Fitted with a positive, hand operated non-return valve. Designed for use with Monument Air testing U Gauge kit.Additional Information:• Type: Hand Bellows

Monument Compression Nut Fitting Spanner is a one piece all steel construction compression nut spanner, that is single ended and made from drop forged steel for added strength and durability. Will suit most 28mm compression nuts and has an overall length of 290mm.Additional Information:• Size: 28mm

Monument pipe cleaning tool is the very best and safest way to prepare copper pipe and copper fittings and comes in 15mm and 22mm cutting sizes. Long-lasting double stemmed brushes clean quickly. Quick thorough tubing prep with patented tungsten carbide abrasive technology, they work 3x faster and last 4x longer than conventional tools. Patented ratchet handle makes jobs possible in tight spaces. Eliminates the risk of scrapes or flux burns.Monument MON2922 Copperkey Pipe Cleaning ToolAdditional Information:• Type: Cleaning Tool

Monument Internal Bending Springs with square section spring steel with a polished finish for internal bending of copper pipes. The size of the spring corresponds to the inside diameter of tube into which it is to be inserted. Size: 15mmAdditional Information:• Type: Internal 15mm

The Monument 2117Q Pro Deburring Tool is ideal for deburring inside copper pipe. Its swivelling blade rotates freely to enable allsorts of deburring operations to be carried out on the inside of pipes, on sheet materials, inside holes etc. The blade is replaceable. The deburrer is suitable for use on steel, copper, brass, plastics, wood and castings.Additional Information:• Type: Deburring Tool

Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with: 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.Additional Information:• Size: 1/2 & 3/4in• Type: Flat

Monument Compression Fitting Spanner double ended spanner for tightening and loosening most 15 and 22 mm compression fitting nuts. Size: 15/22 mm.Single pack.Additional Information:• Size: 15 x 22mm

The Monument Drain Auger comes with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals, and small drains etc.The rotating crank handle, with thumbscrew, fits over and locks the cable and can be entered through strainers.The 3344K drain auger can also be used without the handle as a refill for the MON3313. Specifications: Length: 7.5m (25ft) long retractable.Diameter: 6mm (1/4 in).Additional Information:• Type: Manual• Size: 1/4in• Length: 25ft

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.Additional Information:• Type: Drain Test Plug• Size: 100mm

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.Monument 1379 Testing Plug. Size: 150mm (6 in).Capable of sealing against pressures of up to 1.62 bar / 24 psi.Additional Information:• Type: Drain Test Plug• Size: 150mm

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.The Monument MON1377 1377W Drain Testing Plug comes with the following specifications:Size: 75mm (3 inch).Capable of sealing against pressures of up to 2.24 bar / 33 psi.Additional Information:• Type: Drain Test Plug• Size: 75mm

This Monument 3351G Drill Snake is encased in a plastic tube which remains stationary as the snake is rotated by the electric drill. It is fitted with an automatic clutch slipping if the boring head gets caught in the line.Effective length: 4.5m (15ft).Additional Information:• Type: Accessory• Size: 1/4in• Length: 15ft

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in various sizes. Fitted with removable top caps and rubber rings. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).Additional …

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 503D Spare Flat Tap Reseater Cutter 19mm (3/4in)Additional Information:• Size: 3/4in• Type: Flat Cutter

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 505J Spare Flat Tap Reseater Cutter 22mm (7/8in)Additional Information:• Size: 7/8in• Type: Flat Cutter

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 507P Spare Flat Tap Reseater Cutter 25mm (1in)Additional Information:• Size: 1in• Type: Flat Cutter

Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1457Q Medium Force Cup Plunger 100mm (4in)Additional Information:• Diameter: 100mm