Other Hand Tools GEDORE

Punch / Special-Toolsteel

Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Working angle approx. 25 in each direction Blade from GEDORE molybdenum-vanadium-Plus tempered steel Blade made of molybdenum-vanadium-steel hardened and tempered

3-component handles Power-Grip3 with hanging hole Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Size 3 and 4 blade with hexagon bolster Blade from GEDORE molybdenum-vanadium-Plus tempered steel * not standardised

3-component handles Power-Grip3 with hanging hole Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Size 3 and 4 blade with hexagon bolster Blade from GEDORE molybdenum-vanadium-Plus tempered steel * not standardised

3-component handles Power-Grip3 with hanging hole Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Size 3 and 4 blade with hexagon bolster Blade from GEDORE molybdenum-vanadium-Plus tempered steel * not standardised

Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Blade from GEDORE molybdenum-vanadium-Plus tempered steel TORX PLUS = reg. trademark of Acument Intellectual Properties, LLC. USA TORQ-SET is a registered trademark of Phillips Screw Company, USA TX PLUS = reg. trademark of Acument Intellectual Properties, LLC. USA

Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Blade from GEDORE molybdenum-vanadium-Plus tempered steel Blade from molybdenum-vanadium-Plus tempered steel

Slim design for working in confined space. Knurled head for quick starting or counter-holding of screws.

Hexagon socket key set in s/3 Check-Tool module

Set of open flare nut spanners in 1/3 Check-Tool module

Foam insert for TX 3C Screwdriver set T8-T30mm.

COMPATIBLE EQUIPMENT: The T-handle with 1/4" square drive is suitable for hand-operated sockets With GEDORE Bit adapter No. 620 it can also be used for 1/4" bits
EASY TO USE: The ergonomic 2-component handle is easy on tendons and joints There is also less danger of canting due to the central position of the square drive
HIGH-QUALITY WORKMANSHIP: The blade is very tough and long-lasting GEDORE uses high-quality steel in its manufacture, ensuring safe use at all times
GEDORE QUALITY FOR MORE THAN 100 YEARS: The product range of over 17,000 tools meets and exceeds industrial standards As a professional, use GEDORE hammers, pliers or entire toolkits for safe working
SCOPE OF DELIVERY: 1 x GEDORE …

Flaring tool boerdex 4-14 mm and 3/16-3/4"

IN 19 Acc. to DIN 7422 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated IN 19 17 for oil filter and drain plug screws * not standardised

For protruding and recessed TORX screws
Material: vanadium steel
In GEDORE blue sheet steel case

Combination spanner set size9-19mm 8pcs

Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Total swivel angle approx. 15-20 Total swivel angle approx. 15-20

Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Tip as per DIN ISO 8764-1 PH Tip as per DIN ISO 8764-1 PH

Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Tip as per DIN ISO 8764-1 PZ Tip as per DIN ISO 8764-1 PZ

Square drive as per DIN 3120 - D 25, ISO 1174, with locking pin Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated * not standardised

Square drive as per DIN 3120 - D 25, ISO 1174, with locking pin Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated * not standardised

Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated * not standardised

Sockets in-hex 5 6 7 8 10 12 14 17 19 - 55 mm long
Sockets in-hex 5 6 7 8 10 11 12 13 - 100 mm long
Sockets in-hex 5 6 7 8 10 12 14 - 140 mm long
Sockets in-hex 5 6 7 8 10 12 - 200 mm long

For confined spaces 3-component handles Power-Grip3 with hanging hole Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of drive marked at end of the handle Blade from GEDORE molybdenum-vanadium-Plus tempered steel Blade from molybdenum-vanadium-Plus tempered steel