Other Hand Tools IRWIN

Irwin 6X Blue Groove Stubby Wood Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep. Specifications Sizes: 16, 18, 20, 22 & 25mm Working Length: 50mm (2in) Overall Length: 100mm (4in) #html-body [data-pb-style="60FF6AAAE55F3"]{justify-content: …

Irwin G245/8 Gilbow General Purpose Straight Tin Snips 8 Inch / 200mm The Irwin G245/18s are 8 Inch / 200mm long Tin Snips referred to as 'Gilbows'. Irwin Gilbow snips and shears have a cutting capability much greater than the strength of the user. The original tin snips were first designed in 1924 and have dominated the sheet metal cutting industry. Features:
- UNIQUE NON-SLIP JOINT - set and tested for a perfect cut. This should be re-adjusted only after sharpening
- DOUBLE, HOLLOW GROUND BLADES - reduce friction for easier cutting
- DROP-FORGED - carbon tool steel handles and blades
- SAFETY STOP - prevents trapped fingers Specification:
- Size: 8 Inch / 200mm…

Irwin G245/10 Gilbow General Purpose Straight Tin Snips 10 Inch / 250mm The Irwin G245/10s are 10 Inch / 250mm long Tin Snips referred to as 'Gilbows'. Irwin Gilbow snips and shears have a cutting capability much greater than the strength of the user. The original tin snips were first designed in 1924 and have dominated the sheet metal cutting industry. Features:
- UNIQUE NON-SLIP JOINT - set and tested for a perfect cut. This should be re-adjusted only after sharpening
- DOUBLE, HOLLOW GROUND BLADES - reduce friction for easier cutting
- DROP-FORGED - carbon tool steel handles and blades
- SAFETY STOP - prevents trapped fingers Specification:
- Size: 10 Inch / 250mm…

Irwin G245/12 Gilbow General Purpose Straight Tin Snips 12 Inch / 300mm The Irwin G245/12s are 12 Inch / 300mm long Tin Snips referred to as 'Gilbows'. Irwin Gilbow snips and shears have a cutting capability much greater than the strength of the user. The original tin snips were first designed in 1924 and have dominated the sheet metal cutting industry. Features:
- UNIQUE NON-SLIP JOINT - set and tested for a perfect cut. This should be re-adjusted only after sharpening
- DOUBLE, HOLLOW GROUND BLADES - reduce friction for easier cutting
- DROP-FORGED - carbon tool steel handles and blades
- SAFETY STOP - prevents trapped fingers Specification:
- Size 12 Inch / 300mm…

The IRWIN Hilmor GLM compact Tube Bender comes with precision, high pressure aluminium, die cast formers and guides to produce sets, offsets, multiple bends etc., in tubes of a maximum diameter of 22mm.Particularly suitable for installation of small heating systems etc., the bender is supplied complete with 15mm and 22mm formers and guides. Capacities are: Copper BS2871 15-22mm; Stainless Steel BS4127 15mm and Mild Steel BS4152 15mm.Additional Information:• Tool Type: Tube Bender• Min. Size (mm): 15• Max. Size (mm): 22

This IRWIN 10507485 PVC cutter has a simple one-handed ratcheting operation to provide smooth cutting, and clean pipe ends. The cutter's rubberised grips provide confident, safe handling. Capacity: 45mm. Additional Information:• Cutter Type: Pipe Cutter• Min. Capacity (mm): 45• Max. Capacity (mm): 45

The IRWIN Marples 2049 Marking Gauge has a hardwood body and stock, and a plastic thumbscrew. It can be used to mark parallel lines along or across the grain.Additional Information:• Material: Hardwood• Thumbscrew Material: Plastic

The IRWIN Marples M2153 Combination Mortice & Marking Gauge is made of sealed rosewood with a brass pull slide to adjust the extra spur for use as a mortice gauge. A knurled brass thumbscrew is used to secure the stock.Additional Information:• Material: Rosewood• Thumbscrew Material: Brass

The IRWIN Record 200-30C Copper Tube Cutter is a compact and accurate cutter with steel wheel and roller mounted in precision die-cast body. Strong and lightweight, it is designed to cut copper, brass, aluminium, or thin-walled steel. Features a steel de-burrer, which folds into the body when not in use. A spare cutter wheel is located in the handle. Capacity: 3-30mm (1/8in - 1.1/8in) Copper Tube.Additional Information:• Cutter Type: Aluminium/Brass/Copper/Steel• Min. Capacity (mm): 3• Max. Capacity (mm): 28

The Record Irwin T850026 Plastic Pipe Cutter features a V shaped blade which allows for an off-centre motion, reducing tube deformation. The blade provides increased cutting pressure whilst remaining easy to use. The slicing motion of this specially hardened steel blade means that it is sharpened every time a cut is made. Capacity: 26mm.Additional Information:• Cutter Type: Pipe Cutter• Min. Capacity (mm): 26• Max. Capacity (mm): 26

IRWIN Vise-Grip Cable Cutter have an induction hardened chromium nickel steel cutting face that stay sharper for longer. The pliers also feature machined jaws for maximum gripping strength and the moulded ProTouch™ handles for added comfort and less hand fatigue. Can cut up to 2.0 mm cables and a moulded 1 component handle that is pull-resistant.Length: 175mm (7in).Additional Information:• Size (mm): 175• Size (in): 6.3/4• Handle Type: Moulded

The Irwin Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers three times more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple …

These Irwin Vise-Grip WRC Curved Jaw Locking Pliers are ideal for a variety of applications and material shapes. They are made from high-grade heat-treated alloy steel for maximum toughness and durability. The hardened teeth are designed to grip from any angle, and the curved jaw shape is better for fitting around curved work shapes. The plier's classic trigger release provides maximum locking force. The hex key adjusting screw tightens to adjust pressure and draw materials together and also provides a controlled release. The in-built wire cutter will cut screws and bolts of up to 1/4 inch (6mm) diameter in progressive bites. Specifications Length: 254mm (10in) Capacity: 48mm (1.7/8in) Dimensions: …

The Irwin Vise-Grip 3 piece set comprises of: The Curved Jaw Locking Pliers, ideal for a variety of applications and material shapes. They are made from high-grade heat-treated alloy steel for maximum toughness and durability. The hardened teeth are designed to grip from any angle. The pliers classic trigger release provides maximum locking force. The hex key adjusting screw tightens to adjust pressure and draw materials together and also provides a controlled release. The Locking Long Nose Pliers, they have a powerful locking action. The jaws are long enough to reach into tight spots, whilst the tips are small enough to grip tiny objects. The pliers also incorporate a wire cutter. Specifications …

The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502773 Auger bit - long series has the following dimensions:Drillbit diameter: 24.0mmTotal length: 400mmWorking Length: 323mmAdditional Information:• Diameter (mm): 24• Overall Length …