Other Hand Tools

• Comprehensive kit covering engine timing and belt replacement on VAG 1.2-2.0D Pumpe Duse and 1.2, 1.6, 2.0D Common Rail diesels.• Also covers these engines fitted in Ford, Dodge and Mitsubishi models.• Kit contains crankshaft locking tools for both oval and round crank gears, camshaft locking pins and tensioner adjustment tools.• Supplied in storage case.Comprehensive kit covering engine timing and belt replacement on VAG 1.2-2.0D Pumpe Duse and 1.2, 1.6, 2.0D common rail diesels. Also covers these engines fitted in Ford, Dodge and Mitsubishi models. Kit contains crankshaft locking tools for both oval and round crank gears, camshaft locking pins and tensioner adjustment tools. Supplied in stora…

Small, stainless steel trays with strong magnets that attach to any ferrous surface. Useful for retaining small metal fixings.

Tough, heat-treated carbon steel for high torque application. Rubber-coated feet for improved grip. Corrosion-resistant electro plating. Self-tightening mechanism grips filters from 60 - 110mm. For gripping filters with flat faces only. 3/8" square drive.

Heavy duty dual-function slide hammer mounted on robust steel shaft with vinyl grip. Pulls out dents from vehicle bodywork and removes difficult-to-shift bearings from shafts and hubs. Includes nose cone, 2 x puller screws, L hook and cast-iron hammer. Weight 1.5kg. Length 460mm.

For removal of upholstery, clips, trims, mouldings and wheel hubs of cars, vans and utility vehicles. Strong fibreglass and nylon construction prevents scratches or damage to panels. Extra-large support area provides maximum leverage. Includes wide, narrow, pull and handle type removers and upholstery clip remover.

Heavy duty carbon steel head and lattice. Ideal for repetitive application. Includes 5 nozzles: 3.2mm (1/8"), 4.0mm (5/32"), 4.8mm (3/16"), 6.0mm (15/64"), 6.4mm (1/4").

Heavy duty gear pullers in sizes 75mm, 100mm and 150mm. Reversible for internal or external use.

Chemically-blackened carbon steel riveter with interchangeable heads for 2.4, 3.2, 4.0 and 4.8mm rivets. Includes 60 rivets.

Magnetic Gripper / 500 mm Length / Weight 0.03 kg

The Stahlwille Flexible Magnetic Lifter with a length 400mm with a 8mm diameter. Miniature but powerful magnetic head giving 500g of lifting power. Made in Germany. Specification Maximum Magnetic Lift 500g. Length 460mm. Magnetic Diameter 8mm.

Bar - Fatmax Stanley hammer.

Hardened and tempered square head centre punch with knurled shank and black coated finish. The knurled body provides a secure grip during use. Length: 3.2 x 100mm (1/8 x 4in).Additional Information:• Length: 100mm (4in)• Tip: 3.2mm

Stanley 0-58-912 DynaGrip Nail Punch 1.6mm / 1/16in The Stanley 0-58-912 Dynagrip Nail Punch is part of a group of punches which are colour coded to denote size. This one is grey and measures 1.6mm / 1/16 Inch at the point. Features:
- Available in diameter 0.8, 1.6, 2.4, x 102mm
- Colour coded by tip size for easy identification
- Cupped tip for easy alignment
- Induction heat treated for safety and improved performance
- Long length allows for setting nails in hard to reach places
- Over-moulded grip to help dampen vibrations and reduce slipping during use
- Used for driving finish nails beneath trim work Specification:
- Model number: 0-58-912
- Diameter: 1.6mm / 1/16in …

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification. Used for driving finish nails beneath trim work.Tip Size: 2.4mmLength: 5inColour: Red SleeveAdditional Information:• Length: 125mm (5in)• Tip: 2.4mm (3/32in)

Grip is slip-resistant in all weather conditions and ribbed to absorb shock, improving precision
Long length enables user to set nails in hard-to-reach areas
Fully hardened, precision-milled steel for long life
Long, beveled tip for easy nail head alignment
Color coded by tip size for quick identification

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification. Used for driving finish nails beneath trim work.Tip Size: 1/32inLength: 5inColour. Yellow SleeveAdditional Information:• Length: 125mm (5in)• Tip: 0.8mm (1/32in)

The Stanley 0 05 927 Hand Sander has a heavy-duty, ribbed aluminum body that stays flat and rigid. Its efficient clamp design holds paper or screen firmly in place. Fitted with a comfortable, bi-material handle. Accepts most sandpaper and sanding screens.Additional Information:• Type: Hand Sander

Heavy-duty ribbed aluminum body
Stays flat and rigid with wooden handle
Strong clamps to hold paper or screens
Bi-material handle
Accepts most paper or screens

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed.

For dismantling timber work, case opening, etc. and removing nails. Forged high grain steel with chisel end and swan neck. Sold loose.

Fully chromed carbon steel medium stroke slide hammer. 370mm Overall length with 0.85kg hammer. Bearing extractor collets with internal capacity from 11-32mm. Supplied in storage case. Features & Benefits: • Fully chromed carbon steel medium stroke slide hammer. • 370mm Overall length with 0.85kg hammer. • Bearing extractor collets with internal capacity from 11-32mm. • Supplied in storage case. • Model No. AK714 Specifications: Model No AK714 Brand: Sealey Nett Weight: 2.69kg Collet Diameter: Ø11-16mm(3/8"-1/2"), 15-19mm(9/16"-11/16"), 18-25mm (5/8"-1"), 26-32mm(1"- 1-1/4")

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Manufactured from hardened and tempered high grade carbon steel.• High quality jaws with heat treated internal spring.• Non-slip induction-hardened tips 60-64 HRC.• Blackened finish for corrosion resistance.• Dipped handles for comfort and control.• Capacity: 19-60mm.• Lifetime guarantee*.Manufactured from hardened and tempered high grade carbon steel. High quality jaws with heat treated internal spring. Non-slip induction-hardened tips 60-64 HRC. Blackened finish for corrosion resistance. Dipped handles for comfort and control.• Manufactured from hardened and tempered high grade carbon steel. • High qual…

• Suitable for use with bodyshop repair kits and chassis straighteners.• Capacity (Straight Pull): 5tonne.• Jaw Width: 45mm.Suitable for use with bodyshop repair kits and chassis straighteners.• Suitable for use with bodyshop repair kits and chassis straighteners. • Capacity (Straight Pull): 5tonne. • Jaw Width: 45mm. • Model No. RE94Technical Specification:Capacity: 5tonneJaw Width: 45mmNett Weight: 1.92kgDimensions: Length: 110mm x Height: 53mmWeight: 1.974KgWarranty: 1 year

• Suitable for use with bodyshop repair kits and chassis straighteners.• Capacity (Straight Pull): 3tonne.• Capacity (Cross Pull): 2tonne.• Jaw Width: 35mm.Suitable for use with bodyshop repair kits and chassis straighteners.• Suitable for use with bodyshop repair kits and chassis straighteners. • Capacity (Straight Pull): 3tonne. • Capacity (Cross Pull): 2tonne. • Jaw Width: 35mm. • Model No. RE95Technical Specification:Capacity: Straight Pull - 3tonne, Cross Pull - 2tonneJaw Width: 35mmNett Weight: 2.17kgDimensions: Length: 173mm x Height: 60mmWeight: 2.252KgWarranty: 1 year