Other Hand Tools

1 x DEWALT Skimmer Telescopic Pole 60in (152cm).

1 x DEWALT Skimmer Telescopic Pole 84in (213cm).

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in. Features: Replaceable blade and punch. Punch diameter: 3.2 mm (1/8in). Cutting length: 35 mm per single pressure. Cutting width: 2.8 mm (0.109in).Additional Information:• Type: Slate Cutter

Plier type roof slate tile cutter with spring loaded handles. Approx length: 300mm (12 in). Will cut slate up to 7mm (9/32 in) thick.Additional Information:• Type: Slate Cutter

Large slate guillotine which cuts up to 12mm (1/2in) thick natural slates in one easy action. Suitable for cutting natural slate only. Overall length: 840mm (33in).Weight: 8.1kg (18lb).Additional Information:• Type: Slate Cutter

Spare blade for 0101 and 0110.Additional Information:• Type: Blade only

Monodex Nibbler Shears are easier to use in many applications than conventional tinsnips. The upward cutting action of the blade cuts through mild steel up to 20 gauge and most non-ferrous metals up to 18 gauge thickness. Cuts without distorting the sheet. Cutting Capacities Stainless steel 0.6mm (22Ga 0.023in). Galvanised steel, zinc, sheet metal 1.2mm (16Ga 0.047in). Copper, brass 1.5mm (15Ga 0.059in). PVC, vinyl flooring, aluminium 2mm (12Ga 0.078in). Polycarbonate 2.5mm (10Ga 0.098in). Perfect for cutting rails and studs. Replaceable stainless steel blade. No shear strain. Nibbling width 2.7 mm.

The Edma Multicoup Extra Universal Cutting Tool also known as mitre shears. With variable angle cuts. Eliminates the need for a mitre box. Fitted with ergonomic, soft grip handles for increased comfort. For use on decorative moulding, wooden skirting boards, rubber seals and PVC section. Specification Length: 240mmWeight: 422gAdditional Information:• Type: Cutter

Designed for cutting plastic sections, rubber glazing joints, decorative mouldings, tile trim and PVC tape. Cutting shears for standard corners and angles. 56 mm utility knife blade. Special features: cuts from 0° to 45° . Ergonomic design.

Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench.Additional Information:• Type: Slate Cutter

Repair kit for 0320 and 0310 slate cutters.Additional Information:• Type: Spares

Laminate/MDF flooring guillotine. Cuts neatly without tearing the laminate layer. No breathable dust. Noise free. Does not need sharpening. Maximum cutting width: 210mm. Maximum cutting thickness: 10mm. Trestle rest for long boards. Includes waste collector.Additional Information:• Type: Cutter

Edma Straight Vario Laminate / MDF Guillotine is perfect for straight cuts, in length and angled cuts, up to 90° in laminate flooring. It leaves a neat cut without damaging the laminate layer. It doesn't require re-sharpening, no noise and no breathable dust is left behind. Comes with: Protective Felt Pads, 1 x Mini Trestle for long boards, 1 x Waste Collector and 1 x Removable Board Stopper for 210mm cut. Specification Max. Cut: Straight: 320mm, Angled: 210mmMax. Thickness: 15mmWeight: 12.45kgAdditional Information:• Type: Cutter

This carrier allows boards and sheets to be carried by a single person. Sturdy metal construction that has a wide base for better panel seating and an offset handle to help stop catching your knuckles in use. Handle has a plastic grip to prevent slipping.Additional Information:• Type: Board

Spare universal punch suitable for models 0310, 0324 and 0335 slate cutters.

Total Safety Slogging Wrench 36mm Non Sparking Cu-Be by EGA Master

10mm Boarding and plumbing auger OAL1000mm Cutting Length 970mm, 1001110 Suitable for formwork, interior fitting work, plumbing, heating, electrical installation, also for metals, e.g. sandwich material with steel, aluminium or profile sheeting, wood, plasterboard, light building materials, insulation;, 1001, 100111000

14mm Boarding and plumbing auger OAL1000mm Cutting Length 970mm, 1001114 Suitable for formwork, interior fitting work, plumbing, heating, electrical installation, also for metals, e.g. sandwich material with steel, aluminium or profile sheeting, wood, plasterboard, light building materials, insulation;, 1001, 100111400

20mm Lewis Auger Bit OAL 320mm Spiral Length 255mm, 1410320 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141032000

6mm Lewis Auger Bit OAL 320mm Spiral Length 255mm, 1410306 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141030600

Lewis Auger Bit set of 8pcs OAL235mm in wooden case, 1410200 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141020000

The IRWIN Gilbow G56 is a straight blade cutting snip which has been designed for use on precious metals. The long handle/short blade ratio gives the user more control when cutting. Irwin Gilbow snips and shears have a great cutting capability which this is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece. The original Gilbow G56 jewellers tin snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.Additional Information:• Type: Straight• Size: 180mm

The IRWIN Gilbow G67 is a left hand cranked shear suitable for straight cutting and off cutting in a clockwise direction. These Irwin Gilbow G67 11 inch left hand cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged. The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow G67 tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good, easy, smooth cutting movement. Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to …

IRWIN Hilmor precision extruded aluminium guide. Suitable for use with the GLM bender and available to suit 15 mm or 22 mm pipes.Size. 15 mm O.D.Additional Information:• Type: Guide• Size: 15mm