Other Hand Tools

Spare blade for 0101 and 0110.Additional Information:• Snip Type: Blade only

Monodex Nibbler Shears are easier to use in many applications than conventional tinsnips. The upward cutting action of the blade cuts through mild steel up to 20 gauge and most non-ferrous metals up to 18 gauge thickness. Cuts without distorting the sheet. Cutting Capacities: Stainless steel: 0.6mm (22Ga; 0.023in).Galvanised steel, zinc, sheet metal: 1.2mm (16Ga; 0.047in).Copper, brass: 1.5mm (15Ga; 0.059in). PVC, vinyl flooring, aluminium: 2mm (12Ga; 0.078in).Polycarbonate: 2.5mm (10Ga; 0.098in). Perfect for cutting rails and studs. Replaceable stainless steel blade. No shear strain. Nibbling width: 2.7 mm.

The Edma Multicoup Extra Universal Cutting Tool also known as mitre shears. With variable angle cuts. Eliminates the need for a mitre box. Fitted with ergonomic, soft grip handles for increased comfort. For use on decorative moulding, wooden skirting boards, rubber seals and PVC section. Specification Length: 240mmWeight: 422gAdditional Information:• Board Type: Cutter

Designed for cutting plastic sections, rubber glazing joints, decorative mouldings, tile trim and PVC tape. Cutting shears for standard corners and angles. 56 mm utility knife blade. Special features: cuts from 0° to 45° . Ergonomic design.Additional Information:• Tool Type: Mitre Shears

Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench.Additional Information:• Slater Type: Slate Cutter

Repair kit for 0320 and 0310 slate cutters.Additional Information:• Slater Type: Spares

Laminate/MDF flooring guillotine. Cuts neatly without tearing the laminate layer. No breathable dust. Noise free. Does not need sharpening. Maximum cutting width: 210mm. Maximum cutting thickness: 10mm. Trestle rest for long boards. Includes waste collector.Additional Information:• Tool Type: Cutter

This carrier allows boards and sheets to be carried by a single person. Sturdy metal construction that has a wide base for better panel seating and an offset handle to help stop catching your knuckles in use. Handle has a plastic grip to prevent slipping.Additional Information:• Board Type: Board

Spare universal punch suitable for models: 0310, 0324 and 0335 slate cutters.Additional Information:• Slater Type: Spares

Total Safety Slogging Wrench 36mm Non Sparking Cu-Be by EGA Master

10mm Boarding and plumbing auger OAL1000mm Cutting Length 970mm, 1001110 Suitable for formwork, interior fitting work, plumbing, heating, electrical installation, also for metals, e.g. sandwich material with steel, aluminium or profile sheeting, wood, plasterboard, light building materials, insulation;, 1001, 100111000

14mm Boarding and plumbing auger OAL1000mm Cutting Length 970mm, 1001114 Suitable for formwork, interior fitting work, plumbing, heating, electrical installation, also for metals, e.g. sandwich material with steel, aluminium or profile sheeting, wood, plasterboard, light building materials, insulation;, 1001, 100111400

20mm Lewis Auger Bit OAL 320mm Spiral Length 255mm, 1410320 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141032000

6mm Lewis Auger Bit OAL 320mm Spiral Length 255mm, 1410306 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141030600

Drill Rig for Auger Bits drill length 460mm fixed version, 1403460 Two stageless adjustable depth stop and two spiral springs for back stroke of the power drill. Precise drilling in exact 90. With adjustable plate for the drill bush for eact guidance of the drill bit. For drill bits 8,10,12,14,16,18,20,22,24,26mm, 1403, 140346000

Drill Rig for Auger Bits drill length 460mm pivoting version, 1404460 Two stageless adjustable depth stop and two spiral springs for back stroke of the power drill. Precise drilling in exact 90 to 45. With adjustable plate for the drill bush for eact guidance of the drill bit. For drill bits 8,10,12,14,16,18,20,22,24,26mm, 1404, 140446000

Lewis Auger Bit set of 8pcs OAL235mm in wooden case, 1410200 "Lewis" pattern, milled version relief precisely machined, screw threading centre point, main edge and cutting lips of premium quality. HEX shank from 8mm. For drilling deep holes in soft wood and European hard wood with power drill and joinery machine., 1410, 141020000

Flexipads Flexible hand sanding holder which can be used with foam and abrasive discs. Perfect for curved surfaces.Size: 125mm. Made in Great BritainAdditional Information:• Pad Type: Sanding Disc Holder

The IRWIN Gilbow G56 is a straight blade cutting snip which has been designed for use on precious metals. The long handle/short blade ratio gives the user more control when cutting. Irwin Gilbow snips and shears have a great cutting capability which this is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece. The original Gilbow G56 jewellers tin snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.Additional Information:• Snip Type: Straight• Length (mm): 180• Length (in): 7

The IRWIN Gilbow G67 is a left hand cranked shear suitable for straight cutting and off cutting in a clockwise direction. These Irwin Gilbow G67 11 inch left hand cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged. The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow G67 tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good, easy, smooth cutting movement. Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to …

IRWIN Hilmor precision extruded aluminium guide. Suitable for use with the GLM bender and available to suit 15 mm or 22 mm pipes.Size. 15 mm O.D.Additional Information:• Tool Type: Guide• Min. Size (mm): 15• Max. Size (mm): 15

IRWIN Hilmor precision extruded aluminium guide. Suitable for use with the GLM bender and available to suit 15 mm or 22 mm pipes.Size. 22 mm O.D.Additional Information:• Tool Type: Guide• Min. Size (mm): 22• Max. Size (mm): 22

Carbon Monoxide Detector / Battery Life 10 Years / Photo-Electric / Detection Area 60 m²

RWM150 smoke alarm, extra light, HxWxD 36 x 105 x 105 mm, pure white. Supplied = assembled. Height = 36 mm. Width = 105 mm. Depth = 105 mm. Colour = pure white. Product type = smoke alarms. For use in bedrooms, children's rooms, hallways, etc. Also suitable for use in recreational vehicles (e.g. motorhomes) that people stay in. Recalibration when soiled. The RWM150 optical smoke alarm is suitable for use in bedrooms, living rooms, children's rooms and hallways. It provides a reliable warning about any smoke development and thereby saves lives. It is particularly long lasting thanks to the 10 year battery. The alarm is certified by VdS. It is one of the five best smoke alarms: in its 1/21 issue,…