Other Hand Tools

The Faithfull Automatic Centre Punch conveniently fits into a pocket like a pen. Designed to release a punch when the head is depressed, and the strike force is adjustable from 5lb to 30lb by rotating the knurled head. It enables the user to make a wide range of graduated markings from light indents to heavy punching without using a hammer. Length: 100mm (4in)Additional Information:• Length: 100mm (4in)• Tip: 4.0mm

The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. With an adjustable working height. The feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. Supplied in a hardwearing storage bag to provide added protection. MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Specification Working Height: 1600-2900mmMax. Working Load: Vertical: 60kg, @45°: 20kgAdditional Information:• Type: Support• Size: 1.6-2.9m

Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube. Tube Cutting Capacity. 3 to 30mm. Uses spare wheel FAIPCW6001

The Faithfull adjustable pipe cutter cuts copper, brass, aluminium and light gauge steel tube. It features a retractable de-burrer and has a steel wheel and rollers. Specifications Tube cutting capacity: 6 - 42mm outside diameter Uses spare wheel FAIPCW642 Colour: Blue

The Faithfull Round Fencing Tamper has an all steel construction with a small, round head. Suitable for fencing applications where access to a confined space is needed. It is ideal for use when compacting cement or earth around fence posts.Additional Information:• Head Type: Round• Head Weight: 4.0kg (8.8lb)• Handle Length: 1.37m

The Faithfull Copper Chopper is the perfect tool for making clean burr-free cuts in copper pipes. It is ideal for use in confined or awkward places and it can be operated using only one hand. Simply clip the tool onto the pipe and rotate the cutter in the direction of the arrow shown on the cutter body until the pipe is cut clean through. The Copper chopper is designed to cut copper pipe only, and not for use when cutting pipes manufactured from other materials such as stainless steel or plastic. Replacement cutting wheels are available. Specifications For use on 15mm copper pipe Colour: Silver

The Faithfull Copper Chopper is the perfect tool for making clean burr-free cuts in copper pipes. It is ideal for use in confined or awkward places and it can be operated using only one hand. Simply clip the tool onto the pipe and rotate the cutter in the direction of the arrow shown on the cutter body until the pipe is cut clean through. The Copper chopper is designed to cut copper pipe only, and not for use when cutting pipes manufactured from other materials such as stainless steel or plastic. Replacement cutting wheels are available. Specifications For use on 22mm copper pipe Colour: Silver

The Faithfull Auto Start Blow Torch is a high temperature, all-purpose gas torch designed for home use. The blow torch has an automatic piezo ignition, fine flame adjustment valve and a rapid one minute warm up.The Faithfull torch has a highly ergonomic, shock-resistant polypropylene handle, making it comfortable to use.Suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges Part nos. FAIGZ350, FAIGZ170 (Not included).Supplied with a stability base. Applications:Soft Soldering, Aluminium Welding, Paint Stripping, Pipe Bending, Loosening Bolts, Defrosting Pipes, Brazing and Lighting Barbecues. Specifications:Max. operating temperature: 1600°C.Optimum power output: 1,230 Watts.…

The Faithfull Auto Start Power Torch EN417 is a powerful gas torch designed primarily for use in plumbing and soldering applications. This torch has an automatic piezo ignition and a fine flame adjustment valve with an instant FLARESAFE function, this makes the torch safe to use at any angle immediately after starting up. The workstation neck is designed for hands free operation.It is suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges - Part nos. FAI GZ350, FAI GZ170 (not included).Supplied with a stability base. Specifications: Max operating temperature: 1,400°C.Optimum power output: 1,450 Watt.Gas consumption: 104 g/h.EN417 Connection.Additional Information:• …

Faithfull Lightweight Aviation Tinsnips manufactured to a high specification which includes a safety locking latch, strong opening spring and slip guards for protection on each handle. Designed to cut up to 1. 2mm sheet steel, non-ferrous material, vinyls, plastic and rubber. Formed blades in satin finish are serrated to prevent sheet metal slipping. Specification Length 250mm (10in). Cutting Capacity Sheet Steel 1.2mm. These Faithfull Compound Aviation Snips have the following specification Cut Type Left. Length 250mm (10in). Cutting Capacity Sheet Steel 1.2mm.

Faithfull Lightweight Aviation Tinsnips manufactured to a high specification which includes a safety locking latch, strong opening spring and slip guards for protection on each handle. Designed to cut up to 1. 2mm sheet steel, non-ferrous material, vinyls, plastic and rubber. Formed blades in satin finish are serrated to prevent sheet metal slipping. Specification Length 250mm (10in). Cutting Capacity Sheet Steel 1.2mm. These Faithfull Compound Aviation Snips have the following specification Cut Type Right. Length 250mm (10in). Cutting Capacity Sheet Steel 1.2mm.

Faithfull Lightweight Aviation Tinsnips manufactured to a high specification which includes a safety locking latch, strong opening spring and slip guards for protection on each handle. Designed to cut up to 1. 2mm sheet steel, non-ferrous material, vinyls, plastic and rubber. Formed blades in satin finish are serrated to prevent sheet metal slipping. Specification Length 250mm (10in). Cutting Capacity Sheet Steel 1.2mm. These Faithfull Compound Aviation Snips have the following specification Cut Type Straight. Length 250mm (10in). Cutting Capacity Sheet Steel 1.2mm.

The Faithfull traditional lead dresser manufactured from straight grain seasoned beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials.Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 50 x 170

The Faithfull Webbing Stretcher is a beechwood tensioning tool used for installing upholstery webbing. It is rebated on one edge for frame location with a slot and peg for holding the webbing firmly in place during installation. The webbing is looped through the slot and held by the dowel, allowing the stretcher to adjust the web tension prior to fixing.Accepts webbing up to 50mm (2in) wide.Additional Information:• Size: 50mm• Material: Beechwood

The Faithfull Plumber's Soldering Pad is a high temperature, asbestos free protective heat pad for plumbing, brazing and soldering applications. Ideal for professional soft soldering, brazing and most other plumbing applications, this heavy-duty heat pad will provide protection to surfaces against burn marks and heat damage. For best results always insure the white side of the pad is facing towards the heat source and avoid direct flame contact with the surface of the pad for prolonged periods. If the surface of the pad begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. The pad also features an easy wipe clean back and has reinforced edging.…

The Faithfull Plumber's Soldering Mat is a high temperature, Asbestos free protective heat mat for plumbing and soldering applications. It is ideal for DIY and light trade use, including soft soldering and most plumbing applications. The heat mat withstands temperatures of up to 550°C and will provide protection to surfaces against burn marks and heat damage. For best results, the flame should not come into direct contact with the surface of the mat for prolonged periods. If the surface of the mat begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. Always use the same side to face the flame to keep the reverse side clean against the surface …

These Faithfull brass wire scratch brushes are used in situations where there could be a potential fire or explosion hazard. Brass wire brushes will not cause a spark.2 Row.Additional Information:• Bristle: Brass• Rows: 2-Row

These Faithfull brass wire scratch brushes are used in situations where there could be a potential fire or explosion hazard. Brass wire brushes will not cause a spark.3 Row.Additional Information:• Bristle: Brass• Rows: 3-Row

These Faithfull brass wire scratch brushes are used in situations where there could be a potential fire or explosion hazard. Brass wire brushes will not cause a spark.4 Row.Additional Information:• Bristle: Brass• Rows: 4-Row

Faithfull range of quality scratch brushes, manufactured using a heavy-duty plastic handle with a soft grip coating. The ergonomically designed handles are comfortable to use and provide good clearance for the hand from the work surface. Each brush has a high density bristle content at both ends where the most force is focused when in use, for a better performance and longer working life. Brushes are available in 4 types, carbon steel, stainless steel, brass and plastic. Each brush has 4 x 16 rows of bristles.Ideal for use when a less aggressive scouring action is required. Brass bristles will not create sparks and are suitable for use in fire risk applications.Additional Information:• …

The Faithfull Brick Lifter allows single-handed lifting of bricks and blocks by cantilever action. Adjustable length to suit any task in hand. The robust construction gives a long life and is electroplated to resist rust. Specifications Lifting capacity: 400 to 670mm (16 to 26in) Cantilever action Electroplated finish: resists rust Dimensions: D 1.8 x W 0.97 x H 4.85 cm Colour: Red/Black #html-body [data-pb-style="60FF6AAA81133"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: …

The Faithfull Butane Propane Mix Gas Cartridges are fitted with standard type EN417 threaded self-sealing safety valves. They are suitable for use with Faithfull and all other blow torches fitted with an EN417 fitting. These cartridges may also be used with blow torches fitted with a CGA600 fitting, using a Faithfull valve converter, product code: FAIGZCONVERT.1 x Faithfull Butane Propane Mix Gas Cartridge 170gAdditional Information:• Type: Butane/Propane• Size: 170g• Fitting: EN417

The Faithfull Butane Propane Mix Gas Cartridges are fitted with standard type EN417 threaded self-sealing safety valves. They are suitable for use with Faithfull and all other blow torches fitted with an EN417 fitting. These cartridges may also be used with blow torches fitted with a CGA600 fitting, using a Faithfull valve converter, product code: FAIGZCONVERT.1 x Faithfull Butane Propane Mix Gas Cartridge 350gAdditional Information:• Type: Butane/Propane• Size: 350g• Fitting: EN417

The Faithfull Button Magnets are made from Alnico to provide a high resistance to corrosion and operate in high temperatures up to 500°C. The north and south poles are on the same face and separated by a slot. All sizes have holes for mounting the magnet, but they must not be recessed into ferrous metals, as it will short circuit the magnetism. Suitable to be used as work holding devices for welding, sign making and other applications, or for reed switch operation.Diameter: 12.5mmHeight: 9.5mmPull Power: 0.7kgAdditional Information:• Diameter: 12.5mm• Height: 9.5mm• Max. Pull: 0.7kg• Weight: 17g