Other Hand Tools

Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in the body, use the parallel brush series. Cutters are case hardened and the feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits 1/2in and 3/4in BS1010 new series and BS5412 Flat and Bevelled seats. Complete with 17, 19, 20, 25 mm (11/16in 3/4in 13/16in 1in) flat cutters and 11/16in, 13/16in (17,20mm) Bevelled Cutters. Two double bushes.

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools. 1 x Monument 501X Spare Flat Tap Reseater Cutter 16mm (5/8in)

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools. 1 x Monument 502A Spare Flat Tap Reseater Cutter 17mm (11/16in)

These heavy-duty manhole cover lifting keys possess rectangular shaped ends and a triangular handle. Each key is constructed from iron and steel and is finished with a zinc plating. Available in an array of lengths, the keys are supplied in pairs. Features and Benefits Heavy-duty keys manufactured from iron and steel for maximum durability Rectangular shaped end and triangular handle Zinc plating protects the product from corrosion Supplied in pairs Available in a range of lengths to suit your preferences and needs Typical Applications Construction Plumbing Engineering

Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube and full user instructions. For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the tap …

This Monument 1277s is a replacement hose to fit gas test gauges. It has an internal diameter of 7/32 in (5.5mm). They are black nitrile for standard and are 1m in length (Coil). NOTE: Do not use this hose for LPG (low pressure gas).Additional Information:• Type: Tubing• Size: 1m (39in)

Monument 1279 Black replacement hose to fit gas test gauges, are 1m in length, and have an internal diameter of 7/32 in (5.5mm). Note: Do not use this hose for LPG (Liquified Petroleum Gas).Additional Information:• Type: Tubing• Size: 1m (39in)

The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by themselves. 2 Plugs supplied: 1 x 1370B 15mm Test Plug. 1 x 1371E 22mm Test Plug.Additional Information:• Type: Test Plug• Size: 15 & 22mm

This Monument set of 6 Test Plugs contains the following small bore test plugs: 2 x 1370B 15mm Test Plugs.2 x 1371E 22mm Test Plugs.2 x 1372H 28mm Test Plugs. The plugs are used for blocking off small pipes such as copper pipes for dry testing prior to commissioning, however they cannot be used for air testing purposes by themselves.Additional Information:• Type: Test Plug• Size: 15/22/28mm

Monument socket forming tools (copper pipe jointers) are ideal for joining 2 pieces of copper pipe of equal diameter together without using fittings. The loose former allows easier withdrawal of tool after use. The resulting capillary joint that is left can be soft or hard soldered to finish the joint. Available in a variety of sizes: 15, 22, 28 and 15 & 22mm.This Monument 138R Copper Pipe Jointer has the following specification: Pipe Diameters: 15mm and 22mmPipe Thickness: 0.7mm and 0.9mmAdditional Information:• Size: 15 & 22mm

The Monument MON1445 1445F spare hose for connecting testing equipment comes in the following: Length: 1m.Internal Diameter: 10mm.Additional Information:• Type: Tubing• Size: 1m

The Monument 1470F Smoke Emitter Pellets give off a dense white low-toxic smoke when ignited. They have a burn time of 60 seconds and have an approximate volume of 15m³.They are used for testing flues, chimneys, fans etc and come supplied in a pack of 10. Specification: Smoke Colour: White.Pack Quantity: 10.Additional Information:• Type: Smoke Pellets• Dye/Smoke Colour: White

The Monument 1515U Water Flow Weir Gauge is designed to measure water flow rates in order to determine if suitable flow is available in a building prior to the plumbing installation of washing machines, boilers, showers etc. This type of water flow gauge is also used for diagnosing if a combi boiler or water heater may need de-scaling. The water flow gauge is made from durable plastic with a stainless steel mesh strainer to avoid turbulence. It features a dual scale to measure flow rates of 2 to 25 litres and 1 to 5 gallons per minute.Additional Information:• Type: Flow Tester

This Monument spare rubber hose is for use with U gauges. They have a coil length of 2m and an internal diameter of 7/32in (5.5mm). Specifications: Colour: Black.Length: 2m (78in) (coil). Additional Information:• Type: Tubing• Size: 2m (78in)

The Monument 1730X Orange Hose for Gas Test Gauges. Rubber Hose ID 5.5mm food quality, Length 2m. Colour Orange

Test Nipples screw into gas meters to enable connection to a gas test gauge. The hexagon screw shuts off supply to the gauge.1/8in. BSP thread.Additional Information:• Type: Test Nipple• Size: 1/8in BSP

Monument Air Testing U-Gauge Kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4in) water gauge pressure on any size of drain or pipe. The kit is housed in a display box with full instructions. Contains: 1 x U-Gauge1 x Hand Bellows Pump1 x 1/2in BSP Nipple Cap1 x 1in BSP Nipple Cap1 x Y-Piece3 x 600mm lengths of Rubber HoseAdditional Information:• Type: Test Kit

The Monument 175C U-Gauge (also known as a Manometer) should be used to test for leaks after installation or repair of any drain or pipeline system. Made from unbreakable parts, it will test up to 100mm (4in) water gauge pressure irrespective of pipe diameter. The hinged lid of the gauge folds back so that it forms a base behind the gauge for added stability.Additional Information:• Type: U-Gauge

The Monument MON180 180S Nipple Cap are for attachment to drain test plug outlets to enable connection of rubber hose to the U Gauge. It is made from plastic with a washer. Specification: Size: 1/2in BSP.Additional Information:• Type: Nipple Cap• Size: 1/2 BSP

This Monument Tee Piece for U Gauges connects three pieces of rubber hose together for convenient connection to U Gauge, bellows and nipple cap.Additional Information:• Type: Tee Piece

The Monument 2035Q ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm copper pipe. This puller simply engages with 14tpi thread of the compression fitting to remove the olive from the tube. With a 1/2in square drive for attachment to a ratchet. Made in Britain.Additional Information:• Type: Olive Puller• Size: 15mm