Tool Kits

• Vacuum brazed diamond drill bit.• Hex shank for use with drills.• Fast dry drilling in to porcelain tiles.Vacuum brazed diamond drill bit. Hex shank for use with drills. Fast dry drilling in to porcelain tiles.• Vacuum brazed diamond drill bit. • Hex shank for use with drills. • Fast dry drilling in to porcelain tiles. • Model No. DBD12HTechnical Specification:Size: ø12mmDimensions: Length: 18mm x Height: 85mmWeight: 0.08KgWarranty: Consumable

• HSS Roll forged drill bits manufactured to DIN 338.• 118° Point tip.• Efficient clog-free swarf clearance.• Sizes from 1 to 10mm in 0.5mm increments.• Supplied in flip-up metal storage case.General-purpose HSS roll forged drill bits manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. Supplied in flip-up metal storage case.• HSS Roll forged drill bits manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • Sizes from ø1 to 10mm in 0.5mm increments. • Supplied in flip-up metal storage case. • Model No. DBS19RFTechnical Specification:Contents: ø1, 1.5, 2, 2.5, 3, 3.5, …

• HSS Fully ground drill bits manufactured to DIN 338.• 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids easier penetration.• Efficient clog-free swarf clearance.• Sizes: ø1 to 8mm in 0.5 increments (10 of each).• Sizes: ø8.5 to 10mm in 0.5 increments (5 of each).• Supplied in tough composite storage case.Fully ground HSS drill bits manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. Supplied in tough composite storage case…

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf clearance.• For use with both hand and pillar drills.• Suitable for drilling high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground HSS drill bit manufactured to DIN 338. • 135° Split …

34 piece standard drill bit set supplied in a plastic folding box 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 4.2, 4.5,5, 5.5, 6, 6.5, 6.8, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13mm
Spiral angle of 28 degrees and a split point of 118 degrees for use on steel and cast iron
Split point for better positional accuracy Supplied in a plastic folding box
Drill diameters - mm - 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0, 4.2, 4.5, 5.0, 5.5 Drill diameters contd - mm - 6.0, 6.5, 6.8, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0
Lifetime Guarantee

28 piece standard drill bit set supplied in a plastic folding box 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 4.2, 4.5,5, 5.5, 6, 6.5, 6.8, 7, 8, 9, 10mm
Spiral angle of 28 degrees and a split point of 118 degrees for use on steel and cast iron Split point for better positional accuracy
Supplied in a plastic folding box
Drill diameters - mm - 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 Drill diameters contd - mm - 4.2, 4.5, 5.0, 5.5, 6.0, 6.5, 6.8, 7.0, 8.0, 9.0, 10.0
Lifetime Guarantee

Straight shank
Supplied in a plastic case with a clear front cover allowing the user easier visibility of the contents
Carbide tipped for a longer service life
1 x 4mm diameter, 70mm overall length and 35mm working length
2 x 5mm diameter, 85mm overall length and 45mm working length
3 x 6mm diameter, 100mm overall length and 60mm working length
3 x 8mm diameter, 110mm overall length and 60mm working length
2 x 10mm diameter, 150mm overall length and 90mm working length
1 x 12mm diameter, 150mm overall length and 90mm working length

5-piece set
Length: 200 mm
1/4 inch hex socket

4 piece set adapted for SDS-Plus Hammers
Includes diameters 6mm, 8mm, 10mm and 12mm
Overall length 160mm
Supplied in a compact, easy to open butterfly type case
Bits can be easily located and removed
Ideal for masonry, indoor decorators, constructors and more

Make pilot holes and countersink wood and fastening screws with just one drill and drive bit
Increased work efficiency
Features drill and drive bit
Contains: 25mm screw bits and various bits

¼” hex shank
Ideal for short wood screws
No 6 – 3mm (M3) minimum drilling depth 11m, maximum drilling depth 31mm
No 8 – 4mm (M4) minimum drilling depth 18mm, maximum drilling depth 38mm
No 10 – 5mm (M5) minimum drilling depth 22mm, maximum drilling depth 41mm
No 12 - 6mm (M6) minimum drilling depth 26mm, maximum drilling depth 45mm
Complete with L wrench
Suitable for use by carpenters, wood construction workers, furniture factories, DIY users and more

Makita D-72855 HSS TIN Drill Bit Economy Set (13 Piece)
The Makita D-72855 is an Economy 13 Piece HSS-TiN Drill Bit Set with Straight Shanks in sizes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6 & 6.5mm suited to drilling metal. The Set is made from High Speed Steel with a titanium-nitride coating, this means that they produce minimal levels of friction and therefore reduce friction deposits. TiN-coated drill bits should last longer than uncoated bits, and you can often push them faster too. The high surface quality of this ground twist drill bit allows extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze …

For metal, masonry and wood
3 brad point drill bits for wood, 5.5mm, 7mm and 8mm diameter
3 HSS drill bits for metal, 5.5mm, 7mm and 8mm
3 TCT drill bits for masonry, 5.5mm, 7mm and 8mm

1 x 4.5mm, 1 x 5mm, 1 x 5.5mm, 1 x 6mm, 1 x 6.5mm, 1 x 7mm, 1 x 8mm and 1 x 10mm
Ideal Product
Premium quality

Ideal Product
Easy to use
Durable product

Includes bits for drilling metal, sockets, 50mm and 100mm screw bits, all with ¼” hex shank
Ideal for metal workers, fitters, repair work and the DIY enthusiast
Supplied in a handy heavy duty plastic carry case
50mm Screw bits: 3 x slotted (SL 0.5 x 4.0, SL 0.8 x 5.5, SL 1.2 x 6.5), 4 x Phillips (PH0, PH1, PH2, PH3), 6 x pozi (PZ0, PZ1, PZ2 x 3, PZ3), 8 x torx (T10, T15, T20, T25, T27, T30, T40, T45), 4 x hex (H 3.0, H 4.0, H 5.0, H 6.0)
100mm PH2, PZ2
38mm nutsetters: 5, 6, 7, 8, 10, 11 and 13mm
HSS metal drill bits: 2.5 x 75mm, 3.0 x 80mm, 4.0 x 95mm, 5.0 x 105mm, 6.0 x 110mm
Magnetic bit holder, ¼” socket adapter, bit holder

Suitable for precise drilling and high quality finish into woods
The saw tooth cutting edges (25mm and above) are great for drilling 90 degree holes.
Set includes sizes 15, 20, 25, 30 and 33mm
Supplied in a wooden storage box

C Form shank
Suitable for use on wood, ferrous and non-ferrous
3 cutters and large flutes
6.3 x 45 5nn shank, 8.3 x 50 6mm shank, 10.4 x 50 6mm shank, 12.4 x 56 8mm shank, 16.5 x 60 10mm shank, 20.5 x 63 10mm shank

For use with concrete, Tile, brick, Slate, limestone, wood, sandwich materials, aluminium, plastics, metal
Features Tungsten carbide tips
Fast and efficient drilling
Eliminates the need to switch between different drill bit types

D259811-XJ Trolley for D25981 30kg Pavement Breaker Trolley for D25981 30kg Pavement Breaker, a ground-up design transportation trolley with increased ergonomics, improved maneuverability. Trolley for D25981 30kg Pavement Breaker. Innovative ground-up design transportation trolley with increased ergonomics, improved maneuverability. Breaker can be fixed to the trolley with and without chisel. Back slide tubes allow the user to easily pull the unit onto a van. Storage bushes ensure chisels don't fall out during transportation. Large plate to transport any kind of materials on the jobsite.

This 10 Piece SDS+ Drill & Chisel Set is suitable for drilling and chiselling in Masonry and Concrete Supplied in a handy aluminium carry case, this 10 piece SDS+ drill and chisel set is ideal for tough drilling and chiselling in Masonry and Concrete. This set contains multiple sizes of SDS+bits varying in size from 5mm to 20mm in diameter. Features:
- Designed to be used with both corded and cordless SDS Plus Hammer Drills
- Suitable for drilling and chiselling Masonry and Concrete
- Varying lengths of bit ranging from 5mm to 20mm diameter
- Also with 2 chisels Contents:
- Aluminium carry case with handle
- Drill Size: 1 x 5.5 x 110mm
- Drill Size: 1 x 6 x 110mm
- Drill Size: …

Hand-operated, knurled grip
Material: vanadium steel
Square drive with locking pin

Hand-operated, knurled grip
Material: vanadium steel
Square drive with locking pin

Hand-operated, knurled grip
Material: vanadium steel
Square Drive with locking pin