Tool Kits

• HSS Roll forged drill bits manufactured to DIN 338.• 118° Point tip.• Efficient clog-free swarf clearance.• Sizes from 1 to 10mm in 0.5mm increments.• Supplied in flip-up metal storage case.General-purpose HSS roll forged drill bits manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. Supplied in flip-up metal storage case.• HSS Roll forged drill bits manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • Sizes from ø1 to 10mm in 0.5mm increments. • Supplied in flip-up metal storage case. • Model No. DBS19RFTechnical Specification:Contents: ø1, 1.5, 2, 2.5, 3, 3.5, …

• Fully ground HSS drill bit manufactured to DIN 338.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf clearance.• For use with both hand and pillar drills.• Suitable for drilling high carbon steels and copper.• High-density case for safe storage.Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.• Fully ground HSS drill bit manufactured to DIN 338. • 135° Split …

34 piece standard drill bit set supplied in a plastic folding box 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 4.2, 4.5,5, 5.5, 6, 6.5, 6.8, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13mm
Spiral angle of 28 degrees and a split point of 118 degrees for use on steel and cast iron
Split point for better positional accuracy Supplied in a plastic folding box
Drill diameters - mm - 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0, 4.2, 4.5, 5.0, 5.5 Drill diameters contd - mm - 6.0, 6.5, 6.8, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 11.5, 12.0, 12.5, 13.0
Lifetime Guarantee

28 piece standard drill bit set supplied in a plastic folding box 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 4.2, 4.5,5, 5.5, 6, 6.5, 6.8, 7, 8, 9, 10mm
Spiral angle of 28 degrees and a split point of 118 degrees for use on steel and cast iron Split point for better positional accuracy
Supplied in a plastic folding box
Drill diameters - mm - 1.0(x4), 1.5(x3), 2.0(x2), 2.5, 3.0, 3.3, 3.5, 4.0 Drill diameters contd - mm - 4.2, 4.5, 5.0, 5.5, 6.0, 6.5, 6.8, 7.0, 8.0, 9.0, 10.0
Lifetime Guarantee

5-piece set
Length: 200 mm
1/4 inch hex socket

4 piece set adapted for SDS-Plus Hammers
Includes diameters 6mm, 8mm, 10mm and 12mm
Overall length 160mm
Supplied in a compact, easy to open butterfly type case
Bits can be easily located and removed
Ideal for masonry, indoor decorators, constructors and more

Make pilot holes and countersink wood and fastening screws with just one drill and drive bit
Increased work efficiency
Features drill and drive bit
Contains: 25mm screw bits and various bits

¼” hex shank
Ideal for short wood screws
No 6 – 3mm (M3) minimum drilling depth 11m, maximum drilling depth 31mm
No 8 – 4mm (M4) minimum drilling depth 18mm, maximum drilling depth 38mm
No 10 – 5mm (M5) minimum drilling depth 22mm, maximum drilling depth 41mm
No 12 - 6mm (M6) minimum drilling depth 26mm, maximum drilling depth 45mm
Complete with L wrench
Suitable for use by carpenters, wood construction workers, furniture factories, DIY users and more

Makita D-72877 TCT Drill Bit set for Masonry (5 Piece) The Makita D-72861 is a 5 Piece Drill Bit Set with straight shanks, suited to drilling in Masonry. The Set has 5 different sized Drills: 4, 5, 6, 8 and 10mm. TCT Masonry Drill Bits are for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. Featuring a heavy-duty Tungsten Carbide tip and fast spiral for waste removal. Features:
- Suited to drilling in Masonry
- Heavy-duty Tungsten Carbide tip
- Straight shank
- Storage case Specification:
- Sizes: 4, 5, 6, 8 and 10mm
- Shank: Straight

Makita D-72861 Drill Bit Set for Wood (5 Piece) The Makita D-72861 is a 5 Piece Drill Bit Set with straight shanks, suited to drilling in Wood. The Set has 5 different sized Drills: 4, 5, 6, 8 and 10mm. They have Brad points, a central point and two raised spurs that help keep the bit drilling straight. The bit cuts timber very fast when used in a power drill and leaves a clean sided hole. Features:
- Suited to drilling in Wood
- Brad points
- Straight shank
- Storage case Specification:
- Sizes: 4, 5, 6, 8 and 10mm
- Shank: Straight

Makita D-72855 HSS TIN Drill Bit Economy Set (13 Piece)
The Makita D-72855 is an Economy 13 Piece HSS-TiN Drill Bit Set with Straight Shanks in sizes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6 & 6.5mm suited to drilling metal. The Set is made from High Speed Steel with a titanium-nitride coating, this means that they produce minimal levels of friction and therefore reduce friction deposits. TiN-coated drill bits should last longer than uncoated bits, and you can often push them faster too. The high surface quality of this ground twist drill bit allows extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze …

Makita D-72849 HSS TIN Drill Bit Economy Set (10 Piece)
The Makita D-72849 is an Economy 10 Piece HSS-TiN Drill Bit Set with Straight Shanks in sizes: 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10mm suited to drilling metal. The Set is made from High Speed Steel with a titanium-nitride coating, this means that they produce minimal levels of friction and therefore reduce friction deposits. TiN-coated drill bits should last longer than uncoated bits, and you can often push them faster too. The high surface quality of this ground twist drill bit allows extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such …

Makita D-72833 HSS-TiN Drill Bit Set for Metal (6 Piece) The Makita D-72833 is a 6 Piece Drill Bit Set suited to drilling in Metal, all with straight shanks. The Set has 6 different sized Drills: 2, 3, 4, 5, 6 and 8mm. HSS-TiN is High Speed Steel with a titanium-nitride coating, this means that they produce minimal levels of friction and therefore reduces friction deposits. TiN-coated drill bits should last longer than uncoated bits, and you can often push them faster too. The high surface quality of this ground twist drill bit allows extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such …

For metal, masonry and wood
3 brad point drill bits for wood, 5.5mm, 7mm and 8mm diameter
3 HSS drill bits for metal, 5.5mm, 7mm and 8mm
3 TCT drill bits for masonry, 5.5mm, 7mm and 8mm

1 x 4.5mm, 1 x 5mm, 1 x 5.5mm, 1 x 6mm, 1 x 6.5mm, 1 x 7mm, 1 x 8mm and 1 x 10mm
Ideal Product
Premium quality

Ideal Product
Easy to use
Durable product

Includes bits for drilling metal, sockets, 50mm and 100mm screw bits, all with ¼” hex shank
Ideal for metal workers, fitters, repair work and the DIY enthusiast
Supplied in a handy heavy duty plastic carry case
50mm Screw bits: 3 x slotted (SL 0.5 x 4.0, SL 0.8 x 5.5, SL 1.2 x 6.5), 4 x Phillips (PH0, PH1, PH2, PH3), 6 x pozi (PZ0, PZ1, PZ2 x 3, PZ3), 8 x torx (T10, T15, T20, T25, T27, T30, T40, T45), 4 x hex (H 3.0, H 4.0, H 5.0, H 6.0)
100mm PH2, PZ2
38mm nutsetters: 5, 6, 7, 8, 10, 11 and 13mm
HSS metal drill bits: 2.5 x 75mm, 3.0 x 80mm, 4.0 x 95mm, 5.0 x 105mm, 6.0 x 110mm
Magnetic bit holder, ¼” socket adapter, bit holder

Makita 19pc HSS ground point set
Drill bits & accessories
Quality Makita accessories that compliment power tools and garden tools
Power source type: Hand Powered
Package Dimensions: 3.4 L x 16.8 H x 10.9 W (centimeters)

HSS-R bit set suitable for drilling in steel and cast-steel, alloyed and unalloyed up to 900 N/mm tensile strength
Also suitable for grey cast, malleable cast iron, die cast metal, iron sinter, nickel-silver, graphite cast iron, short chipping aluminium alloys, bronze, brass and hard plastics
Point angle 118 degrees
Standard twist bits
Contains 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm and 6.5mm
Supplied in a metal box with pop up display of the drills for easier selection

Suitable for precise drilling and high quality finish into woods
The saw tooth cutting edges (25mm and above) are great for drilling 90 degree holes.
Set includes sizes 15, 20, 25, 30 and 33mm
Supplied in a wooden storage box

18 piece mixed drill bit Set
6 drills for drilling wood
6 drills for drilling metal
6 drills for drilling masonry
Metal storage box

C Form shank
Suitable for use on wood, ferrous and non-ferrous
3 cutters and large flutes
6.3 x 45 5nn shank, 8.3 x 50 6mm shank, 10.4 x 50 6mm shank, 12.4 x 56 8mm shank, 16.5 x 60 10mm shank, 20.5 x 63 10mm shank

For use with concrete, Tile, brick, Slate, limestone, wood, sandwich materials, aluminium, plastics, metal
Features Tungsten carbide tips
Fast and efficient drilling
Eliminates the need to switch between different drill bit types

Eiminates the need to switch between different drill bit types
Tungsten carbide tips
Suitable for use with concrete, tile, brick, slate, limestone, wood, sandwich materials, aluminium, plastics and metal
5mm x 85mm
8mm x 110mm
12mm x 150mm
6mm x 100mm
10mm x 150mm