Chargers & Jump Starters

Monitor the charge of the 12V lead-acid battery of a stored powersports vehicle or check if the vehicle´s charging system is working properly.2 automatic modes:battery charge level monitor (single LED flashing mode) and charging system check (arrows mode).4 LEDs cover the voltage range from fully charged to discharged.of all 12V batteries, including higher voltage AGM motorsport batteries (4th LED 12.7V).Battery charge level:The LED that matches the charge level flashes every 5 seconds (long-term consumption less than 0.2 mA).Vehicle Charging System:LED arrow mode is activated when the charging voltage reaches a minimum of 13.5.V (.green LED) or the ideal range of 14.V+ (.green LED).SAE charging p…

OptiMATE cable O-11. High quality permanent battery lead with quick disconnect for automotive/boat batteries, with weatherproof connection system and cable. Features Length: 50 cm M8 eyelets Industry standard 2-pin SAE connector 15 A fuse Max. Cable load: 10 A Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures Rubber sealing cap and sheath for OptiMATE heavy-duty SAE connector High quality cable, developed by TecMate

OptiMate O-108 V2. The fully enclosed SAE to USB 3300 mA charger with 200 cm cable allows safe and fast USB charging of any device mounted on the outside of the handlebar or in your tank bag or hard case. The cable goes where USB charging is required. Charge your phone, GPS, camera and tablet with your weatherproof charger on your motorcycle or up to 80″ / 200 cm away from a 12 V supply. Features Connects to battery cable with industry standard 2-pin SAE connector Inline gasket makes 12 V connection weatherproof! Charges 1x USB device with up to 3300 mA current (or optionally charge 2 devices with O-110 USB splitter). Charging current adjusts to connected device for safe charging. Weatherproof US…

OptiMATE Cable TM-73. A 2.5 meter extension cable that allows a pre-2015 AccuMate or pre-2012 OptiMate with TM connectors to be used further away from the vehicle or battery. Simply plug one end into the AccuMate or OptiMate outlet and the other end into the vehicle. Rugged cable and "glide-guide" TM connectors provide a reliable connection. Can also be used with "Power Accessories" such as USB chargers, flashlights, etc. to extend their range from the battery connection cable. Features Length: 250 cm 2-pole KET plug to 2-pole KET socket Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures High quality cable, designed by TecMate…

The most powerful inverter-charger in the Victron multiplus family with 12 volt battery operation and 16 amp AC transfer switch with a continuous power output of 3000VA and peak power of 6000W for motor starting the powerful built-in battery charger is capable of handling 120 amps current, giving 1440W power and 4-stage charging process.Battery type programming via DIP switches without the need for a programming console with all the necessary protections for good safety and ease of use.

Victron Energy GlobalLink 520  Having an insight into your installation is a key factor in maintaining and operating your off-grid energy solutions. Off-grid should not mean off-line, so here is the GlobalLink 520. This device will bring 4G LTE-M connectivity to all VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years. Global Connectivity for 5 Years 4G LTE-M Complete Monitoring and Control Built in Antenna RuuviTag Support - Temperature Sensors VRM Ready ASS030543020

The lightweight, durable, and rugged GBC104 EVA Protective Case has a semi-rigid custom exterior with zipper closures and a reinforced handle. The rubberised EVA exterior offers protection from moisture, impact, dust, and other environmental factors, while the moulded interior perfectly fits, stores, and protects its corresponding NOCO Boost X UltraSafe lithium jump starters— the GBX155 (sold separately).

The lightweight, durable, and rugged GBC101 EVA Protective Case has a semi-rigid custom exterior with zipper closures and a reinforced handle. The rubberised EVA exterior offers protection from moisture, impact, dust, and other environmental factors, while the moulded interior perfectly fits, stores, and protects its corresponding NOCO Boost X UltraSafe lithium jump starters— the GBX45 (sold separately).

The lightweight, durable, and rugged GBC017 EVA Protective Case has a semi-rigid custom exterior with zipper closures and a reinforced handle. The rubberised EVA exterior offers protection from moisture, impact, dust, and other environmental factors, while the moulded interior perfectly fits, stores, and protects its corresponding NOCO Boost UltraSafe jump starter— the GB50 (sold separately).

The lightweight, durable, and rugged GBC015 EVA Protective Case has a semi-rigid custom exterior with zipper closures and a reinforced handle. The rubberised EVA exterior offers protection from moisture, impact, dust, and other environmental factors, while the moulded interior perfectly fits, stores, and protects its corresponding NOCO Boost UltraSafe jump starter— the GB150 (sold separately).

Compact 6/12V quad bank battery charger perfect for automotive, motorcycle and marine workshops. Suitable for trickle charging a variety of batteries, charger reacts continuously to battery condition and delivers whatever charge rate is required. Four bank charger outputting 4 x 2A depending on the condition and charge of each battery. Constantly regulated voltage patterns allow the battery to be recharged fully and safely without fear of overcharging. Compatible with all AGM, Gel and VRLA flooded batteries commonly found in everything from automotive and farm equipment to motorcycles, ATVs, golf buggies and lawnmowers. Supplied with SAE “quick” connectors on leads and battery terminals …

The LiFePO4 battery: preventing cell under voltage, over voltage and over temperature The first line of protection is cell balancing. All Victron...

Dual voltage smart trickle charger/maintainer ensures that the battery is kept fully charged and ready-to-use for extended periods of time. Clear, easy-to-read LED status lights indicate the charging or ‘float’ mode. Heavy-duty case with simple controls. Charges, EFB and AGM/GEL (stop/start), Lithium and conventional lead acid batteries. Inbuilt reverse polarity protection. Supplied with SAE “quick” connectors on leads and battery terminal eyelets. Features: • Dual voltage smart trickle charger and maintainer ensures that the battery is kept fully charged and ready-to-use for extended periods of time • Clear, easy-to-read LED status lights indicate the charging …

Dual voltage smart charger/maintainer ensures that the battery is kept fully charged and ready-to-use for extended periods of time. Clear, easy-to-read digital display indicates the percentage charging level and the output current of the charger. Heavy-duty case with simple controls. Charges, EFB and AGM/GEL (stop/start), Lithium and conventional lead acid batteries. Inbuilt reverse polarity protection. Supplied with SAE “quick” connectors on leads and battery terminal eyelets. Features: • Dual voltage smart charger and maintainer ensures that the battery is kept fully charged and ready-to-use for extended periods of time • Clear, easy-to-read digital display indicates the …

Dual voltage smart charger/maintainer ensures that the battery is kept fully charged and ready-to-use for extended periods of time. Clear, easy-to-read digital display indicates the percentage charging level and the output current of the charger. Heavy-duty case with simple controls. Charges, EFB and AGM/GEL (stop/start), Lithium and conventional lead acid batteries. Inbuilt reverse polarity protection. Supplied with SAE “quick” connectors on leads and battery terminal eyelets. Features: • Dual voltage smart charger and maintainer ensures that the battery is kept fully charged and ready-to-use for extended periods of time • Clear, easy-to-read digital display indicates the …

OptiMATE cable O-02. Plug with swivel adapter, fits Ø12 mm motorcycle/DIN or Ø21 mm AUTO sockets, with industry standard 2-pin SAE connector. Features Length: 50 cm 2-pole SAE connection according to industry standard 8 A fuse (in plug) Max. cable load: 5 A Use at very low temperatures: down to -20 °C With rubber cable seal for OptiMATE heavy-duty SAE connection High quality cable, developed by TecMate