Chargers & Jump Starters

Automatic charging and maintenance in Pulse Tronic based on selected battery technology COLD function for charging and maintaining batteries at low temperatures RECOVERY function for the recovery of sulphated batteries TEST battery, starter and alternator function SUPPLY function for stable power during battery changes LCD screen Overload, short circuit and reverse polarity protection Complete with cable with pliers and cable with eyelets Unit nominal power max 70 Ah

With stylish LED lighting (blue) and design mesh 2-way speaker, 3" tweeter, 6.5" subwoofer/ midrange speaker With illuminated bass reflex openings With carpet panelling Speaker terminal connections: (4-pin) suitable for cables of 2.5 mm², incl. 12 V connection, Specifications: maximum load: 300 W (impulse), frequency: 60-22,000 Hz, max. sound pressure level: 90 dB, impedance, 4 ohms

The world’s most advanced SELECTABLE battery charger for starter/deep cycle batteries. OptiMate 7 Select comes with a POWER SUPPLY mode for vehicle memory settings & more! Ideal for: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 240Ah. SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 10A (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging Special feature: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

Battery Suitable for all types permantente monitoring Prevents energy loss The engine always remains M3 Battery is charged always

Power station with air compressor 18 bar (260 PSI), 12 V Extremely sturdy plastic housing With integrated work light With power plug, DC connection cable set, 12V automotive connection cable The ideal starting aid and power supply for cars, boats, motorhomes, etc.

The world’s most advanced 12V 10A & 24V 5A battery charger! OptiMate 7 12-24V is perfect for high performance starter & deep cycle batteries that demand temperature controlled charging & long maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 10 – 240Ah) | 24V (batteries from 5- 120Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step desulphation recovery. CHARGING AMPS : 10A @ 12V / 5A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

- Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining battery life according to current consumption Programmable relay to turn off non-crucial loads, or to start a generator if necessary. - A 500 amp quick connect shunt and a connection kit

AccuMate 6/12V Charger. Ideal for classic cars, motorcycles and many other uses. IDEAL FOR : 6V & 12V STD, AGM, GEL lead-acid batteries, starter and deep cycle, up to 50Ah LOW VOLT START: Low Volt Start of 2V for 6 or 12V batteries. CHARGING AMPS : 1.2A (temperature protected) Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

The world’s most advanced SELECTABLE battery charger for starter/deep cycle batteries. OptiMate 6 Select comes with a POWER SUPPLY mode for vehicle memory settings & more! Ideal for: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 144Ah. SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 6A (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging Special feature: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

The world’s most advanced fully automatic 12V battery charger! OptiMate 6 saves batteries that other chargers can’t by recognizing the difference between a discharged or sulphated battery Ideal for: AGM / MF, STD, GEL and spiral cell batteries up to 240Ah SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 5A (Ampmatic) Included Accessories: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

The world’s most advanced 12V & 24V battery charger! OptiMate 6 12V-24V is perfect for high performance starter & deep cycle batteries that demand temp. controlled charging & long term maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 3 – 240Ah) | 24V (batteries from 1- 100Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step SAFE pulse recovery. CHARGING AMPS : 6A @ 12V / 3A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

Input cable length: 2m Output cable length: 2m Mounting: Easy direct wall mounting Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamps Lead for bench charging Warranty: 3 years

Fit Type: Universal SAFE TO USE: User Safety through spark-free operation and reverse polarity protection. Vehicle Electrical Safety through exceptionally clean voltage and current delivery with no surges or spikes. No need to disconnect the battery from the vehicle when charging. Unique 8 step charging system with a patented program that tests battery condition and, charges and maintains to ensure maximum battery life and performance No sparks, short-circuit proof and reverse polarity protected makes it safe for all the vehicles electronics and easy to use Water and dust resistant means it is safe to use in all climate situations

Compatible: CTEK MXS 3.6, MXS 5.0, MXS 5.0 Polar, MXS 5.0 Test&Charge Tough: hardwearing silicone bumper, designed and tested in Sweden Non-slip: Will help the charger grip on angled or slippery surfaces Enhanced grip: For easier handling of your CTEK charger Protects: Strong defence against accidental drops, scrapes and scratches. Easy to fit: this snug-fitting bumper is lightweight, flexible and simple to get on and off.

Product 1: Enables your car battery to be charged through a 12V cigarette socket Product 1: Compatible with all CTEK chargers up to 7A Product 1: Fits 12mm and 21mm sockets Product 1: Easy to fit and has a 60mm length cable Product 2: Easier connection: 2.5 metre cable, for connection to further away or hard to reach batteries Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Secure: snug and safe connection via CTEK’s unique in-built connect system Product 2: Compatible: the Connect 2.5M Extension is designed for with CTEK chargers up to 10A output.

Enables your car battery to be charged through a 12V cigarette socket Compatible with all CTEK chargers up to 7A Fits 12mm and 21mm sockets Easy to fit and has a 60mm length cable International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Fully automatic charging and maintenance in 6 steps maximizes battery life and performance Water and dust resistant means it is safe to use in all climate situations No sparks, short-circuit proof and reverse polarity protected makes it safe for all the vehicles electronics and easy to use Patented maintenance charge for a unique combination of maximized life and performance Numerous accessories simplifies using the same charger for multiple battery applications

Charges batteries up to 300Ah. Maintains larger batteries up to 500Ah Fully automatic charging includes patented desulphation and pulsemaintenance programmes Analysis mode to check if battery can hold charge IP44 rated - suitable for outdoor use 2 year warranty

Product 1: Quick indication: LED traffic light system to show battery charge levels, so you know when to charge. Product 1: Easier connection: features CTEK’s unique Connect system, so it can be attached to a CTEK charger, providing easy access to the battery. Product 1: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 1: Compatible: the Indicator eyelet is designed for use with CTEK chargers up to 10A output. Product 2: Quality Product

Easy to install Comes standard with an end cap attached to ensure the connection stays in good condition while not in use Convenient way to connect from a standard style O. E. , SAE or aftermarket pigtail lead to your CTEK products Easy to read display

Indicates when the harmful sulfation process begins Fits us 800, multi US 3300, multi US 7002, US 0.8, and mus 4.3 battery chargers Designed to make the maintenance of the battery in the vehicle effortless and convenient Easily shows the status on the battery and makes sure that the battery can always get the care it needs

Product 1: Led indicator that allows you to quickly check the condition of your battery it's designed to be neatly and neatly installed in a vehicle panel for permanent connection to the battery Product 1: Easily connect your ctek charger if the battery needs to be charged Product 1: Quality product Product 1: Features ctek's unique connect system so it can be paired to a ctek charger and gives you easy access to the battery Product 2: Useful 2.5 metre extension cable Product 2: Can be used on all CTEK chargers up to 10A Product 2: Can be used on clamps and other quick accessories Product 2: Model number: 40-134

Genuine Part