Chargers & Jump Starters

Automatic temperature compensation offers improved charging efficiency at all temperatures Dedicated AGM mode for fast and efficient charging of GM stop/start batteries Increased user flexibility - eight modes for all battery-charging needs Genuine Part

Quality Product Genuine Part

IDEAL FOR: AGM, GEL & STD 12V batteries from 4 – 60Ah & Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 15Ah CHARGING AMPS: 1.25A (constant current) OPERATION: Selectable, 4 charge programs. FEATURES: OptiMate 4 Quad Program tests before & after charging and can recover a ‘dead-flat’ lead-acid & lithium (LiFePO4) battery from as low as 0.5 Volts. SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode). SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. INCLUDED: O1 weatherproof battery lead & O…

IDEAL FOR: AGM, GEL & STD 12V batteries from 4 – 60Ah & Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 15Ah CHARGING AMPS: 1.25A (constant current) OPERATION: Selectable, 4 charge programs. FEATURES: OptiMate 4 Quad Program tests before & after charging and can recover a ‘dead-flat’ lead-acid & lithium (LiFePO4) battery from as low as 0.5 Volts. SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode). SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. INCLUDED: weatherproof battery lead, battery…

Switch between STANDARD or BMW CAN-BUS program

Limited edition Gulf branding: combines cutting-edge CTEK battery charging technology, with iconic Gulf branding. Whether you are a fan of Gulf racing or enjoy the nostalgia of the brand, the charger features the Gulf orange disc, synonymous around the world with high quality products, innovation and technical excellence Countdown Timer and Start Indicator: gives you an accurate indication of the remaining charging time in hours. Indicator will tell you when you can safely try to start your vehicle before the battery is fully charged Reconditioning Mode: RECOND mode restores batteries that are out of condition or deeply discharged Works with all 12V lead-acid battery types: Including traditional …

BATTERY SUPPORT FOR ON THE GO: The D250SE is a fully automatic on-board charger that powers 12V lead-acid batteries with current up to 20A or secondary lithium-ion batteries with a capacity between 40 and 300Ah. The selectable charging algorithms are designed for 12 V AGM and lithium-ion batteries (*12 V LiFePO) Compatible with intelligent alternators: full functionality with all alternator types MAXIMIZED SOLAR ENERGY PERFORMANCE: The solar panel controller with maximum power point tracking (MPPT) optimises the available performance Charging of second and starter batteries: once the dual battery is fully charged, the D250SE automatically redirects maintenance charging power to the starter …

Charges Batteries Up To 110Ah. Maintains Larger Batteries Up To 160 Ah Unique Reconditioning Mode, Built-Intemperature Sensing Capabilities Completely Sealed Unit, Spark Proof And Reverse - Polarity Protected Premium Input And Output Cable With Robust Strain Relief (1)CTEK40-206 MXS 5.0 Battery Charger, (1)CTEK56-382 Indicator Eyelet Accessory

Specially Designed For Maintenance Charging of Powersport Batteries Enable Charging on Vehicles Using CANBUS Technology Specially designed for maintenance charging of powersport batteries. Ensures a long and healthy battery life Optimises performance of your powersport battery

Product 1: Useful 2.5 metre extension cable Product 1: Can be used on all CTEK chargers up to 10A Product 1: Can be used on clamps and other quick accessories Product 2: Quick indication: LED traffic light system to show battery charge levels, so you know when to charge. Product 2: Easier connection: features CTEK’s unique Connect system, so it can be attached to a CTEK charger, providing easy access to the battery. Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Compatible: the Indicator eyelet is designed for use with CTEK chargers up to 10A output.

Easy to read display Comes standard with an end cap attached to ensure the connection stays in good condition Easily connects to batteries which are often difficult to gain access to Easy to install All CTEK products are backed by our 1 year manufacturer defect warranty

CT5 to CT5 Hanger Holder Practical Storage of Charger and Cables Open Frame design allows easy access to charger functions Also suitable for the 3.8 and 5.0 A CTEK chargers.

Charges batteries from 20Ah up to 200Ah. Maintains larger batteries up to 300Ah Recond mode - special programme to revive deeply discharged batteries Supply mode - can be used as a 12V power source to protect electrical settings Protects your CTEK charger from bumps and gives Kratzern. on slippery surfaces additional Grifffestigkeit. made of durable silicone rubber.

Product 1: Quality Product Product 2: Easier connection: 2.5 metre cable, for connection to further away or hard to reach batteries Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Secure: snug and safe connection via CTEK’s unique in-built connect system

The most TRUSTED battery charger in power sports in a 4-bank version. Ideal for: AGM / MF, STD, GEL and spiral cell batteries from 3Ah to 50Ah SAVE : Low Volt Start of 2V + 2 step desulphation recovery. CHARGING AMPS : 0.8A (constant current, per bank) Included Accessories: 4 x O1 Weatherproof Eyelet lead. 4 x O4 Clamp Lead for bench charging

IDEAL FOR: 4X AGM, GEL & STD 12V batteries from 6 – 96Ah // Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 24Ah CHARGING AMPS: 2A (constant current, per bank) SAFE: No risk of overcharging. Totally safe for vehicle electronics. INCLUDED: 4x weatherproof battery lead & 4x battery clip set.

IDEAL FOR: 2X AGM, GEL & STD 12V batteries from 6 – 96Ah // Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 24Ah CHARGING AMPS: 2A (constant current, per bank) SAFE: No risk of overcharging. Totally safe for vehicle electronics. INCLUDED: 2x weatherproof battery lead & 2x battery clip set.

Charging current A: 2.2 Input voltage, from V: 12 Input voltage, up to V: 24 Input voltage (s) V: 12-24

Victron Energy 24-Volt 25 amp Microprocessor Battery Charger with two full rated outputs and one 4 amp output The Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries The adaptive feature will automatically optimise the charge process relative to the way the battery is being used The Charger comes with a battery temperature sensor, when connected charge voltage will automatically decrease with increasing battery temperature Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation

Suitable for 6V and 12V lead-acid (SLI, Gel, EFB, AGM) and Li-ion batteries 6A charging power and up to 30% fast charging thanks to RF MCU control Real-time power monitoring and smart microprocessor technology for automatic voltage and current RPA22rerere0232023Precise and gentle charging with diagnostic, rescue and maintenance function and auto start function after power failure Compact housing with integrated LCD display, hook attachment, non-slip housing base and convenient 1-button operation. 1.5 metre cable, comfort plug and speed connect system for quick cable change. Power supply (power supply e.g. when changing batteries) and IP65 dust and water protection

High-power, turbo charger – provides fast and faster charging 16-amp charging current – delivers eight times the charging current vs. a standard charger Power-Boost mode – boosts electrical current charging to 50% in the shortest time Active air-cooling – uses two fans to cool battery, optimizing charging time while protecting batteries from overheating Connected-ready technology – connects via a Connectivity Module (sold separately), linking it to a connected device for battery health, charge level and additional charge modes