Chargers & Jump Starters

• Compact 6/12V dual bank battery charger perfect for automotive, motorcycle and marine workshops.• Suitable for charging a variety of batteries, charger reacts continuously to battery condition and delivers whatever charge rate is required.• Two bank charger outputting 2 x 5A depending on the condition and charge of each battery.• Constantly regulated voltage patterns allow the battery to be recharged fully and safely without fear of overcharging.• Compatible with all AGM, Gel and VRLA flooded batteries commonly found in everything from automotive and farm equipment to motorcycles, ATVs, golf buggies and lawnmowers.• Supplied with SAE “quick” connectors on leads and battery terminals eyelet…

1. Mounting locationWarning! For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals, synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.1.2. Keep a clear space of 10 cm around the product for ventilation.1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the temperature increase of the heat sink is not more than 20 °C. However the unit may become hot when conducting fault ground current.
2. InstallationWarning! The galvanic isolator must be wired …

• Portable Mode-2 charger is fitted with BS approved 13A plug so it can be used with any standard 13A socket.• Delay timing function enables users to program delayed start time to benefit from off peak electricity tariffs.• The intuitive LED offers users fault codes, charging time, power and temperature displays.• Current: 10A Fixed.• Voltage: 230V 1ph.• UK 3-pin (BS1363) Plug.• Cable length: 5m.• Cable Specification: EN50620 - 3*2.5mm²+2*0.5mm².• Use with an RCD protected power supply.• Supplied with storage case.Portable Mode-2 charger is fitted with BS approved 13A plug so it can be used with any standard 13A socket. Delay timing function enables users to program delayed start time t…

• Portable Mode-2 charger is fitted with BS approved 13A plug so it can be used with any standard 13A socket.• Delay timing function enables users to program delayed start time to benefit from off-peak electricity tariffs.• The intuitive LED offers users fault codes, charging time, power and temperature displays.• Voltage: 230V 1ph.• UK 3-pin (BS1363) Plug.• Cable Length: 5m.• Cable Specification: EN 50620 - 3*2.5mm²+2*0.5mm².• Use with an RCD protected power supply.• Supplied with storage case.Portable Mode-2 charger is fitted with BS approved 13A plug so it can be used with any standard 13A socket. Delay timing function enables users to program delayed start time to benefit from of…

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 32A.• Voltage: 230V 1ph.• Cable Length: 5m.• Cable Specification: EN50620 - 3*6mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 32A. • Voltage: 230V 1ph. • Cable Length: 5m. • Cable Specification: EN50620 - 3*6mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC2232Technical Specification:Length: 5mNett Weight: 2.5kgPlug Type: Type 2 to Type 2Current: 32AVo…

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 32A.• Voltage: 380-450V 3ph.• Cable Length: 5m.• Cable Specification: EN50620 - 5*6mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 32A. • Voltage: 380-450V 3ph. • Cable Length: 5m. • Cable Specification: EN50620 - 5*6mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC22323Technical Specification:Length: 5mNett Weight: 3.5kgPlug Type: Type 2 to Type 2…

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 16A.• Voltage: 230V 1ph.• Cable Length: 5m.• Cable Specification: EN50620 - 3*2.5mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 16A. • Voltage: 230V 1ph. • Cable Length: 5m. • Cable Specification: EN50620 - 3*2.5mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC2216Technical Specification:Length: 5mNett Weight: 2.4kgPlug Type: Type 2 to Type 2Current:…

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 32A.• Voltage: 230V 1ph.• Cable Length: 5m.• Cable Specification: EN50620 - 3*6mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 32A. • Voltage: 230V 1ph. • Cable Length: 5m. • Cable Specification: EN50620 - 3*6mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC1232Technical Specification:Length: 5mNett Weight: 2.5kgPlug Type: Type 1 to Type 2Current: 32AVo…

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 16A.• Voltage: 230V 1ph.• Cable Length: 5m.• Cable Specification: EN 50620 - 3*2.5mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 16A. • Voltage: 230V 1ph. • Cable Length: 5m. • Cable Specification: EN 50620 - 3*2.5mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC1216Technical Specification:Length: 5mNett Weight: 2.4kgPlug Type: Type 1 to Type 2Current:…

• Dual purpose charger for use with our range of E/START digital models.• Will fully charge an E/START unit within 5 minutes.• Converts any compatible E/START unit into a 12V battery charger.Dual purpose smart charger for use with our range of E/START digital models. Will fully charge the unit within 5 minutes. Converts any compatible E/START unit into a 12V battery charger.• Dual purpose charger for use with our range of E/START digital models. • Will fully charge an E/START unit within 5 minutes. • Converts any compatible E/START unit into a 12V battery charger. • Model No. E/START2ATechnical Specification:Application(s): E/START800.V2, E/START1100.V2, E/START1600.V2Nett Weight: 0.00kgOutput: …

• Output: 1600A (Peak), 800A (EN).• Innovative technology with no internal battery so no need to wait hours for the unit to charge before use.• Simple and safe to use with no long term battery storage issues.• Can be fully energised in approximately 3 minutes.• If the vehicle's battery is faulty or is holding less than 5 volts the ElectroStart1600 can be pre-charged via another vehicle's battery, a Micro USB charging cable (not supplied) or the 12V accessory lead.• Digital display indicates battery voltage, capacitor charge and faults.• Can also be used as a 0.8A battery maintainer using a USB charging cable or a 2A battery charger with the addition of Model No. E/START2A Charging Adaptor.• Comp…

• Suitable for 12V and 24V electrical systems. • Fully electronic, microprocessor controlled.• Suitable for EFB & AGM/GEL (stop/start), Lead Acid, Lead Calcium & Silver Calcium batteries.• Battery Range: 4-450Ah.• Up to 10 analysis and charge phases, including trickle/maintenance.• Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology.• Surge and spike protection during charging and starting.• BSU mode provides support for the battery during prolonged electronic diagnostic checks.Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technolo…

Panel mounted comfort indicator shows the battery s level of charge and allows you to conveniently charge the battery from the panel. Developed for panel mounting, the indicator clearly and simply shows the battery charge level. The charger is connected to the socket on the panel, which makes charging convenient, practical and straightforward. Mount the panel and route the cable to the battery.Many vehicle panels have extra space on the dashboard, which can be used for this model.Uses a simple 'traffic light' system to show the state of charge of your battery. A flashing green light shows that the battery does not require charging. Orange means the battery should be charged to avoid harmful ac…

A practical combination of quick connector and indicator for those with batteries that are difficult to access. The ""traffic light"" indicator shows the battery's charge level simply and clearly. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery.The CTEK Comfort Indicator uses a simple 'traffic light' system to show the state of charge of your battery. A flashing green light shows that the battery does not require charging. Orange means the battery should be charged to avoid harmful acid stratification. A red light warns that the battery is discharged to a point where sulphation (the main battery killer) is occurring …

The CTEK Comfort Connect - 12v/Cigarette Power Plug Adaptor is an easy to fit adapter that allows charging through the 12v cigarette lighter or 12v power accessory socket from a CTEK compatible charger.Compatible with all CTEK chargers up to 10 A.400mm cable.To allow operation, the socket must be 'live' when the ignition is off.

• Steel case with a sturdy carry handle, this single phase charger features good ventilation to help maintain low transformer temperatures.• A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event of the clips being connected incorrectly.• Rocker switches control variable output to the battery to maintain peak condition.• Suitable for regular and low maintenance batteries (25-320Ah).Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrec…

• Steel case with a sturdy carry handle, this single phase charger features good ventilation to help maintain low transformer temperatures.• A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event of the clips being connected incorrectly.• Rocker switches control variable output to the battery to maintain peak condition.• Suitable for regular and low maintenance batteries (20-180Ah).Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrec…

• Steel case with a sturdy carry handle, this single phase charger features good ventilation to help maintain low transformer temperatures.• A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event of the clips being connected incorrectly.• Rocker switches control variable output to the battery to maintain peak condition.• Suitable for regular and low maintenance batteries (20-120Ah).Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrec…

Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly. Rocker switches control variable output to the battery to maintain peak condition. Suitable for regular and low maintenance batteries. Features & Benefits: • Steel case with a sturdy carry handle, this single phase charger features good ventilation to help maintain low transformer temperatures. • A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event of the clips bein…

Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly. Rocker switches control variable output to the battery to maintain peak condition. Suitable for regular and low maintenance batteries.Specifications:Model No CHARGE106Brand: SealeyNett Weight: 4.30kgOutput: 12/24VOutput Charge Peak(EN): 8A(6A)Battery Range: 10-95AhInput Charge: 0.4ACharging Rates: 2Supply: 230VPolarity Protection: Fuse (1 x 15A)Fuse: SBF1550 (Pack of 50), CHARGE106.07 (Single)

Helps protect your CTEK Charger AND your vehicle from bumps and scratches.Gives extra grip on slippery surfacesMade of durable silicon rubber materialThe CTEK BUMPER fits snugly around the body of your CTEK chargerSuitable for all CTEK chargers 3.8-5.0Ah, including the CT5 Stop/Start

High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has nine profiles designed to optimise the condition of the battery and the speed of the charge. Designed for use with vehicle batteries including VRLA (Lead Acid), GEL, AGM/EFB and Leisure on 12V and 24V systems. Temperature sensor allows accurate charging of battery, even when cold. Safety circuitry prevents sparks or polarity reversal. Once fully charged, battery may be left connected to be automatically conditioned and maintained. Features & Benefits: • High frequency inverter type unit designed to both charge a battery and pr…

• Fully automatic microprocessor controlled unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks.• Up to 100 Amp power supply maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work.• Voltage settings between 13-14.8V for programming.• 70A continuous output current or up to 100A maximum for up to three minutes as required.• It will recover a discharged battery (>2V) to almost 100% of its original capacity.• Patent-Pending “thermal runaway” protection and algorithms allow fast and safe charging.• Designed for use with regular automotive, lead-acid, calcium, AGM/GEL and start-stop bat…

Applies high current load test, giving accurate indication of battery condition. Suitable for 6V or 12V automatic lead acid batteries. Also for testing charging system performance. For home and workshop use. Cable length 2 x 300mm.