Chargers & Jump Starters

Protects the battery against excessive discharge and can be used as a system on/off switchThe Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch.
12/24 V auto rangingThe Smart BatteryProtect automatically detects system voltage one time only.
Bluetooth: programming made easyWhen using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If …

Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, , eliminating the need for tools to access the battery terminals. Used in conjunction with SL65S and other compact jump starters this is perfect for motorbikes with batteries under seats or behind panels. Watertight plug and insulated cables allow for permanent fitment. Features smart cable technology that monitors and protects against reverse charging.

Sealey SUPERBOOST180 Starter/charger 180/40amp 12/24v 240v The Sealey SUPERBOOST180 is a battery starter/charger that is suitable for heavier garage use for engines up to a 3-litre capacity. Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features:
- Built-in polarity protection
- Circuitry is protected by a panel mounted fuse
- Suitable for heavier garage use for engines up to 3 litre capacity
- Models feature easy-to-read ammeters and illuminated power switches
- Combination units capable of both charging batteries and providing boost power to help start vehicles with flat batteries Specification: 
- P…

The Sealey START660 Starter/charger fitted with large wheels for easy mobility The Sealey START660 is a Heavy-duty starter/charger for professional garages, workshops and bodyshops. The START660 features a fast-charge timer device to enable rapid battery recovery with a reduced risk of boiling the battery. Fitted with large wheels for easy mobility and features an analogue ammeter and switchable charge circuitry for accurate charge control. Features:  
- Caters for all requirements from cars right up to light commercial vehicles 
- Heavy-duty starter/charger for professional garages, workshops and bodyshops 
- Features fast-charge timer device to enable rapid battery recovery with redu…

Sealey START560 Starter / Charger for professional garages, workshops and bodyshops The Sealey START560 is a Starter / Charger that caters for all requirements from cars right up to commercial vehicles. Features fast-charge timer device to enable rapid battery recovery with reduced risk of boiling the battery. Fitted with large wheels for easy mobility and features an analogue ammeter and switchable charge circuitry for accurate charge control. Features:
- Caters for all requirements from cars right up to commercial vehicles
- Heavy-duty starter/charger for professional garages, workshops and bodyshops
- Features fast-charge timer device to enable rapid battery recovery with reduced risk …

The Sealey START420 Starter/charger for professional garages, workshops and body shops The Sealey START420 is a heavy-duty charger and starter designed for use in professional garages and workshops. It can be used for anything from cars to commercial vehicles. Thanks to its large wheels, it can be easily manoeuvred around the site.  Features:
- 3 Phase
- Caters for all requirements from cars right up to light commercial vehicles
- Heavy-duty starter/charger for professional garages, workshops and body shops
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control Specification:
- Supply: 240V
- Output: 12/24V <&hellip;

The Sealey START320 Starter/Charger for professional garages, workshops and body shops  The Sealey START320 is a 12/24v Starter/Charger for professional garages, workshops and body shops. With large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control. Features:  
- Caters for all requirements from cars right up to light commercial vehicles 
- Heavy-duty starter/charger for professional garages, workshops and bodyshops 
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control   Specification: 
- Supply: 240V 
- Output: 12/24V 
- Input Start: 20A 
&hellip;

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases, including trickle/maintenance and suitable for 12V and 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during …

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for AGM/GEL, Lead Acid, and Lead Calcium as well as stop/start batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases and suitable for 12V & 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital …

Dual purpose smart charger for use with our range of E/START digital models. Will fully charge the unit within 5 minutes. Converts any compatible E/START unit into a 12V battery charger.

The new chargers of the SBC NRG + MINI series are even more efficient and compact thanks to new advances in technology. The redevelopment of the SBC NRG + charger allows 15% more output power than the industry standard, because it uses the injected current with almost no loss. They are used everywhere, where smaller power with small dimensions are needed. Thanks to the temperature-dependent ventilation system, the chargers not only quieter, but also protect your on-board battery at the same time.
3-stage charging curve IUoU
2 or 3 charging outputs for independent charging of several batteries by integrated charging current distributor (MosFet technology)
Each output is protected with integrated …

Composite case with integral battery clip storage and carry handle. Suitable for starting 4 cylinder petrol or diesel engines up to 2L. LED Battery condition and charge indicators. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 4 cylinder petrol or diesel engines up to 2L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Also features an integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.Specifications:Model No RS132Auxiliary Output: 2 x 12V Power …

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED worklight for use at night. Also features integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V?1A). Supplied with mains charger. Features & Benefits: • Cable and Clamp Length: 0.72m. • Comp…

Sealey RoadStart Emergency Power Pack complete with mains charger and double plug in-car charging The Sealey RS131 is an emergency jump starter, designed to provide power to vehicles in the case of battery shortage. This model is fitted with a 12V power socket that will accept any 12V device fitted with a vehicle accessory socket plug and two 5V/2.1A USB outlets for phones and tablets. Features:
- LED Battery condition, polarity check and charge indicators
- Composite case with moulded rubber protection, integral battery cable storage and carry handle
- Fitted with a 12V power socket that will accept any 12V device fitted with a vehicle accessory socket plug and two 5V/2.1A USB outlets …

Composite hi-vis green case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.

Composite case with battery clip storage lugs and carry handle. Suitable for starting vehicles at 12V with 8 cylinder petrol engines up to 8L and 6 cylinder diesel engines up to 6L. 24V with 8 cylinder petrol engines up to 4L and 6 cylinder diesel engines up to 3L. Easy-to-read, colour-coded analogue gauge measures battery condition and charge indicator. Audible warning system for polarity protection. Positive cable fitted with protection against reverse charging from the vehicle. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with a power socket that will accept any 12V device with …

Composite case with integral battery clip storage and carry handle. Suitable for starting 12V vehicles with 8 cylinder petrol engines up to 6L and 8 cylinder diesel engines up to 4.8L. Suitable for starting 24V vehicles with 6 cylinder petrol engines up to 3.5L and 6 cylinder diesel engines up to 3L. Two batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents. Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V. LED Battery condition indicators. Test button gives indication of battery condition. Fitted with 12V power socket that will accept any 12V device with a vehicle …

Composite case with integral battery clamp storage and carry handle. Suitable for starting 12V vehicles with 8 cylinder petrol engines up to 6L and 8 cylinder diesel engines up to 4.8L. Suitable for starting 24V vehicles with 6 cylinder petrol engines up to 3.5L and 6 cylinder diesel engines up to 3L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.

Composite case with integral battery clip storage and carry handle. Suitable for starting vehicles with eight cylinder petrol engines up to 5L and six cylinder diesel engines up to 3.5L. Two batteries connected in parallel give high peak and cranking currents. LED Battery condition indicators. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 8 cylinder petrol engines up to 5L and 6 cylinder diesel engines up to 3.5L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.

Composite case with integral battery clip storage hoods and carry handle. Suitable for starting vehicles with six cylinder petrol engines up to 3.5L and four cylinder diesel engines up to 3L. LED Battery condition and charge indicators. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4 cylinder diesel engines up to 3L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.