Staple Guns & Nailers

Washers are used in a broad range of applications to quickly secure thin straps, metal fixings, metal lath and waterproofing membrane materials to reinforce and prevent fixture pull-over. Features & Benefits • Improved fitment to nailing tool • Flush hardware allows for smooth cuts Specifications • Diameter: 13mm • Pack Quantity: 100

Heavy duty zinc plated steel conduit clips are the fast solution for installation of conduit and pipe. The clip can be pre-attached to the conduit, snapping onto the tube, or inserted directly into the nose piece of the nailer for complete hands free nailing in seconds. Features & Benefits • Improved fitment to nailing tool • Fast solution for installation of conduit and pipe • Complete hands free nailing in seconds Specifications • Diameter: 20mm • Pack Quantity: 100

Heavy duty zinc plated steel conduit clips are the fast solution for installation of conduit and pipe. The clip can be pre-attached to the conduit, snapping onto the tube, or inserted directly into the nose piece of the nailer for complete hands free nailing in seconds. Features & Benefits • Improved fitment to nailing tool • Fast solution for installation of conduit and pipe • Complete hands free nailing in seconds Specifications • Diameter: 16mm • Pack Quantity: 100

Eye or ceiling clips are suitable for ceiling and partitioning applications. Features & Benefits • Improved fitment to nailing tool • Improved External Latch Design Specifications • Pack Quantity: 100

The DPN9033SM is a pneumatic 33° angled short magazine framing nailer which is ideal for prolonged use in tough environments. Specifications • Power Source: Pneumatic • Magazine angle: 33 ° • Collation Type: Stick • Nail diameter range: 2.5-3.3 mm • Nail Length: 50-90 mm • Nail head diameter: 7.2 mm • Magazine capacity: 38-50 Nails • Trigger Type: Sequential • Operating Pressure: 4.8 - 8.3 Bar • Air consumption per actuation: 2.47 l • Noise LPa 1sd / Uncertainty: 90.8 / 4 dB • Noise LWa 1sd / Uncertainty: 99.7 / 4 dB • Noise LPa 1s, 1m / Uncertainty: 86.7 / 4 dB • Vibration / Uncertainty: 3.02 m/s² • Length: 360 mm…

The DPN64C is a compact and powerful pneumatic coil nailer equipped with a 225 nail capacity magazine. It is ideal for heavy duty nailing and first fix applications. Features and Benefits• Powerful coil framing nailer designed to drive 64mm ring shank nails in the toughest timber.• Pneumatic operation for consistant performance at temperature between -20 and 50°C• Minimal cleaning, service & maintenance requirements.• Sequential operating mode allows for precision placement.• Twist adjustable magazine to accomodate different nail sizes.• 360° exhaust port allows for comfortable operation in any position.• Tool free depth adjustment function.Specifications• …

The DEWALT DPN1850PP Pneumatic Oil-Free 18 Gauge Brad Nailer is fitted with a Precision Point™ nose. That has a unique contact detect system for reduced marking of the work surface. 80% nose tip reduction for improved accuracy and visibility. The selectable trigger system provides sequential or contact operation with an easy depth adjust control for precise countersinking of nails. Also fitted with a tool-free jam release mechanism for easy nail removal. Suitable for the following applications: beading & trim, tongue & groove, panelling and cabinet work. Specification Magazine Capacity: 100 Nails.Operating Pressure: 4.8-8.3 Bar.Nail Length: 15-50mm.Nail Head Diameter: Crown2.Trigger Type: …

The DPN1664 is a professional grade 16 gauge pneumatic oil-free finish nailer that delivers maximum performance with minimal maintenance.Features and Benefits• Long life maintenance-free pneumatic brad nailer • 360° rear exhaust port• Non marking tip minimises damage to work surfaces• Tool free depth adjuster allows the user to quickly change how the nail sits in the wood.• Oil-free operation eliminates risk of staining work surfaces.Specifications• Power Source: Pneumatic• Nail Diameter: 16 gauge• Nail Length: 25 - 64 mm• Nail head diameter / Crown: 1.2 x 2.8 mm• Magazine capacity: 110 Nails• Trigger Type: Sequential• Operating …

The DPN1564APP is a 15 Gauge pneumatic nailer with a precision point tip. 80% nose tip reduction gives improved visibility and accuracy, and a unique contact detect system helps to reduce marking of the work surface during operation. Specifications • Power Source: Pneumatic • Nail Diameter: 15 gauge • Nail Length: 32 - 64 mm • Nail head diameter / Crown: 3.2 mm • Magazine capacity: 129 Nails • Trigger Type: Sequential & Bump • Operating Pressure: 4.8 - 8.3 Bar • Air consumption per actuation: 1.7 l • Noise LPa 1sd / Uncertainty: 80.1 / 4 dB • Noise LWa 1sd / Uncertainty: 93.12 / 4 dB • Noise LPa 1s, 1m / Uncertainty: 87.13 /4 dB • …

Features and Benefits• Ratchet Drive mode - allows the user to strike the driver multiple times if the cleat is not set flush with the first blow. Can also be disengaged for single blow operation.• Rubber bumpers positioned side and front of the tool to minimise damage to expensive flooring.Specifications• Magazine capacity: 120 Nails• Length: 340mm• Width: 89mm• Height: 444mm• Weight: 3.9kg• Power Source: Manual• Fastener Range: 38-50 mm

For use with the DeWalt DCN8905 Concrete Nailer. Specifications • Length: 2100mm • Weight: 2.8kg

DeWalt DCN8904 Drywall Contact Trip for the DCN890 Cordless Concrete Nailer.

DeWalt DCN8903 Non-Magnetic Contact Trip for the DCN890 Cordless Concrete Nailer.

For use with the DeWalt DCN890 Concrete Nailer.

For use with the DeWalt DCN890 Concrete Nailer.

The DCN890 is a brushless concrete nailer which is powered by DeWalt 18v XR lithium ion batteries. It has a stablizing foot on the magazine which enables quick and easy positive placement on workpieces without slipping, and a narrow nose for improved access in tight spaces. The machine has a three speed control system, offering 13000, 14000 & 1500 RPM settings; aditionally it can be set to single or rapid firing modes. An LED indicator on the tool lights up in the event of a stall, and a tool free stall release system lets you quickly get up and running again whenever this occurs. The DCN890 is suitable for use with DeWalt proprietary 13mm - 57mm pins. Features and Benefits • Brushless …

Proven reliable DeWalt technology
Lightweight construction at just 5.96 Kgs
High performace for the home or tradesman

The DeWalt DCN692 18v XR 90mm Framing Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its brushless motor delivers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Its mechanical rather than gas operation offers consistent performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. Features & Benefits • Brushless motor for increased runtime • Quicker readiness to fire, less recoil and more durability …

The Dewalt DCN45RN cordless roofing nailer, is powered by an efficient brushless motor. This cordless roofing nailer features a tool-free depth adjustment wheel, a stall release lever that returns the driver blade in the event of a jam, and a tool-free nail tray with the capacity to hold up to 120 wire collated roofing nails. The nailer is battery powered therefore there is no need for hoses or compressors, meaning the DCN45RN is ready for use when you are. The DCN45RNB has the capability to run 3/4" to 1-3/4" roofing nails. Features include an ergonomic handle design, a belt hook, a bump fire mode for efficiency, and the capability to fire up to three nails per second - and up to 500 nails …

The Dewalt DCN45RN cordless roofing nailer, is powered by an efficient brushless motor. This cordless roofing nailer features a tool-free depth adjustment wheel, a stall release lever that returns the driver blade in the event of a jam, and a tool-free nail tray with the capacity to hold up to 120 wire collated roofing nails. The nailer is battery powered therefore there is no need for hoses or compressors, meaning the DCN45RN is ready for use when you are. The DCN45RNB has the capability to run 3/4" to 1-3/4" roofing nails. Features include an ergonomic handle design, a belt hook, a bump fire mode for efficiency, and the capability to fire up to three nails per second - and up to 500 nails …

The DeWalt DCK2046P2 cordless twin pack contains a DCN692 Framing Nailer and a DCN660 Second Fix Nailer. These are both professional grade brushless machines which use DeWalt's 18v XR li-ion battery system. DCN692 Features & Benefits • Two speeds/power levels to optimise the nailer for firing all lengths of nails • Longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails • Versatile 30-34° magazine angle will accept most clipped head & off centre round head paper tape or wire weld collated framing nails • Depth can be easily adjusted • Ergonomic tool design • Tool free stall/jam clearance to minimize downtime • …

Used for fastening multiple electrical cables against a flat working surface allowing for easy one-handed cable insertion. Single and double sided versions for varying cables quantities and longer runs. Features & Benefits • For fast and secure mounting of multiple wires or cables • Patented thread design offers low installation torque Specifications • Pack Quantity: 50

Features: Single or contact firing, Safety contact tip, Batteries and Chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

Features: Single or contact firing, Safety contact tip, Supplied with 1x 2.0Ah battery and charger. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.