Multimeters

Compatible with the following meters
Fluke 114/115/116/117
Fluke 175/177/179 Fluke 1503/1507/1577/1587
Fluke 9040/9062 Fluke 922
Fluke 971 Fluke 51/52/53/54 II

Reversible
Locking System
72 Teeth
1/2 Drive

Reversible
With Metal Handle
1/2 Drive

Measure voltage and current with your clamp jaw
Faster, safer testing without touching a live wire
Power quality indicator shows if equipment or power line is faulty
Complete 3-phase voltage and current tests with fewer steps

easy-to-read 37 mm LCD display
backlight
mechanical measuring

More efficiency: the storage and relative value measurement of the multi-tester simplifies and accelerates the comparison of measured values
Simplifies work: the automatic measuring range setting of the multimeter saves manual pre-selection
In addition, continuity and diode tests are also possible

Measures: voltage, current, resistance, frequency, capacity, and temperature
In addition, continuity and diode tests are also possible
Large LCD display
Storage of previous measurement & comparison to future measurement

DATA HOLD allows you to store the current reading on the display. Select - function selection. Temperature measurement from -40°C to 1000°C / -4ºF ~ 1832ºF with the included thermocouple helps detect faulty components of electrical installations
NCV allows non-contact detection of current in cables. allows the measurement of DC and AC voltages up to 2000 V, DC and AC currents up to 400 mA and resistors up to 400 MΩ, capacities up to 400 uF and frequencies up to 4 MHz. diode and continuity test as well as hFE, PNP, and NPN Tran. sistortest.
The device has a large LCD screen with blue backlight, so you can view and read results up to 4000 even in the dark. the rubber case protects against mecha…

Current Clamp / Counts 1,000 / Measurement Category CAT III 1000 V

True-RMS AC clamp meter
Measure up to 400 A AC
Use as a standalone meter or as part of the system
Logging function for recording and saving up to 65,000 readings

Digital
Sold in each
Easy to Use

Current Clamp

Brand: PROSKIT
Colour: green
Dimensions: 130 x 72 x 28 mm

technology for non-contact voltage detection
AutoVolt automatic ac/dc voltage selection
Low input impedance: Helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
True-rms for accurate measurements on non-linear loads

Set of 1.35m automotive test leads with Ø4mm banana style connectors. Used for testing and diagnosing faults in electronic circuits. Suitable for use with most multimeters and analysers. Features & Benefits: • Set of 1.35m automotive test leads with Ø4mm banana style connectors. • Used for testing and diagnosing faults in electronic circuits. • Suitable for use with most multimeters and analysers. • Model No. TATL Specifications: Model No TATL Brand: Sealey Nett Weight: 0.14kg

Noid Test Light Kit is used to provide an easy-to-use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits. Bright clear LED lights give a clear indication of switching on low tension circuits and relays. The 4mm female sockets allow the probes to be used on any multimeter with 4mm male leads. Fine probe pins offer universal connectivity. Features & Benefits: • Kit provides an easy-to-use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits. • Bright clear LED lights give a clear indication of switching on low tension circuits and relays. • The 4mm female sockets allow the probes to be used on any mu…

Connector set containing seven common sizes of male and female connectors and two earth lead connectors. Provides a time-saving solution and accurate connections for testing a wide variety of electrical components and connectors. Designed for use with a multimeter with banana type connectors. For automotive use, not suitable for use on high voltages. Features & Benefits: • Connector set containing seven common sizes of male and female connectors and two earth lead connectors. • Provides a time-saving solution and accurate connections for testing a wide variety of electrical components and connectors. • Designed for use with a multimeter with banana type connectors. • For automotive use, not…

• Five pairs of coloured cables.• Each cable has shrouded crocodile clips at each end.• Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.• Five pairs of coloured cables. • Each cable has shrouded crocodile clips at each end. • Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring. • Model No. VS222Technical Specification:Contents: Red, Black, Green, White, YellowNett Weight: 0.08kgDimensions: Length: 35mm x…

Spare inductive clamp for 200 and 300 range multi and clamp meters. Contents: 1 x Inductive Clamp for 41821 and 41822 Digital Meters

• Crocodile clips small.• Colours: Black & Red.• Pack of 12 (6 Pairs).• Length: 55mm.• Maximum current 10 amps.Crocodile clips small. Maximum current 10 amps.• Crocodile clips small. • Colours: Black & Red. • Quantity: 12 (6 Pairs). • Length: 55mm. • Maximum current 10 amps. • Model No. CROCSMTechnical Specification:Nett Weight: 0.04kgOverall Length: 55mmPack Qty: 12 (6 Pairs)Dimensions: Length: 38mm x Height: 135mmWeight: 0.04KgWarranty: Consumable

• Crocodile clip assortment.• Quantity: 60.• Colours: Black & Red.• Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8).• Supplied in partitioned box.Assortment box of 60 crocodile clips.• Crocodile clip assortment. • Quantity: 60. • Colours: Black & Red. • Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8). • Supplied in partitioned box. • Model No. AB023CATechnical Specification:Contents: (Approximate Quantity) Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8), Colours; Black & RedNett Weight: 0.34kgDimensions: Length: 151mm x Height…

Fully insulated probes have a spring loaded clamp with stainless steel pin that self centres and punctures the insulation. Fitted with 4mm banana style connectors and suitable for use with most multimeters and analysers. Suitable for automotive use only, with a maximum input of 50V DC.

Non-contact voltage detector with LED/audible indication. Designed for quickly identifying wire and cable breaks as well as detecting voltage in fuses, cables, switches, outlets, lighting fixtures and many more. Features two selectable sensitive settings low gear (L) and high gear (H) detecting voltage ranges from 80V – 1000V. Requires 2 x AAA batteries (not included). Features & Benefits: • Non-contact voltage detector with LED/audible indication. • Designed for quickly identifying wire and cable breaks as well as detecting voltage in fuses, cables, switches, outlets, lighting fixtures and many more. • Features two selectable sensitive settings low gear (L) and high gear (H) detecting voltage …

VDE Approved mains voltage tester with screwdriver blade. Fully insulated with moulded transparent plastic handle and blade sheath. Features & Benefits: • VDE Approved mains voltage tester with screwdriver blade. • Fully insulated with moulded transparent plastic handle and blade sheath. • Model No. AK1991 Specifications: Model No AK1991 Brand: Sealey Length: 190mm Nett Weight: 0.03kg Testing Range: 100-250V