Multimeters

Clear - innovative filter technology blocks 50 Hz interference (“buzz”) that makes tracing difficult
Includes Pro3000F50 Filtered 50 Hz Probe, 9V alkaline battery
Switch between filtered and unfiltered modes with one button press
Tone and trace wire on non-active networks
Loud probe speaker is audible in noisy locations

Ideal for heavy duty, precision drilling in soft and hard woods, large section beams, joists, floorboarding, chipboard and plywood. Features & Benefits • Lewis flute design for rapid chip removal • Hexagonal shank for secure grip in jawed chucks Specifications • Diameter: 6mm • Total Length: 230mm • Working Length: 155mm • Shank Reception: 6.5mm Hex • Pack Quantity: 1

The Stanley Intelli Tools FatMax® Wall Plug Tester quickly checks the status of UK wall plugs. The LED lights clearly indicate a range of wiring conditions such as correct, missing earth and live earth reverse etc. This unit will not detect earth neutral reverse. Designed to Safety Standard EN 61010.Additional Information:• Current: AC

Compatible with the following meters
Fluke 114/115/116/117
Fluke 175/177/179 Fluke 1503/1507/1577/1587
Fluke 9040/9062 Fluke 922
Fluke 971 Fluke 51/52/53/54 II

Reversible
Locking System
72 Teeth
1/2 Drive

Reversible
With Metal Handle
1/2 Drive

Measure voltage and current with your clamp jaw
Faster, safer testing without touching a live wire
Power quality indicator shows if equipment or power line is faulty
Complete 3-phase voltage and current tests with fewer steps

easy-to-read 37 mm LCD display
backlight
mechanical measuring

More efficiency: the storage and relative value measurement of the multi-tester simplifies and accelerates the comparison of measured values
Simplifies work: the automatic measuring range setting of the multimeter saves manual pre-selection
In addition, continuity and diode tests are also possible

Measures: voltage, current, resistance, frequency, capacity, and temperature
In addition, continuity and diode tests are also possible
Large LCD display
Storage of previous measurement & comparison to future measurement

DATA HOLD allows you to store the current reading on the display. Select - function selection. Temperature measurement from -40°C to 1000°C / -4ºF ~ 1832ºF with the included thermocouple helps detect faulty components of electrical installations
NCV allows non-contact detection of current in cables. allows the measurement of DC and AC voltages up to 2000 V, DC and AC currents up to 400 mA and resistors up to 400 MΩ, capacities up to 400 uF and frequencies up to 4 MHz. diode and continuity test as well as hFE, PNP, and NPN Tran. sistortest.
The device has a large LCD screen with blue backlight, so you can view and read results up to 4000 even in the dark. the rubber case protects against mecha…

True-RMS AC clamp meter
Measure up to 400 A AC
Use as a standalone meter or as part of the system
Logging function for recording and saving up to 65,000 readings

Digital
Sold in each
Easy to Use

Current Clamp

Brand: PROSKIT
Colour: green
Dimensions: 130 x 72 x 28 mm

technology for non-contact voltage detection
AutoVolt automatic ac/dc voltage selection
Low input impedance: Helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
True-rms for accurate measurements on non-linear loads

• Set of 1.35m automotive test leads with ø4mm banana style connectors.• Used for testing and diagnosing faults in electronic circuits.• Suitable for use with most multimeters and analysers.Set of 1.35m automotive test leads with ø4mm banana style connectors. Used for testing and diagnosing faults in electronic circuits. Suitable for use with most multimeters and analysers.• Set of 1.35m automotive test leads with ø4mm banana style connectors. • Used for testing and diagnosing faults in electronic circuits. • Suitable for use with most multimeters and analysers. • Model No. TATLTechnical Specification:Nett Weight: 0.14kgDimensions: Length: 175mm x Height: 40mmWeight: 0.146KgWarrant…

• Kit provides an easy-to-use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits.• Bright clear LED lights give a clear indication of switching on low tension circuits and relays.• The 4mm female sockets allow the probes to be used on any multimeter with 4mm male leads.• Fine probe pins offer universal connectivity.Noid Test Light Kit is used to provide an easy-to-use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits. Bright clear LED lights give a clear indication of switching on low tension circuits and relays. The 4mm female sockets allow the probes to be used on any multimeter with 4mm male lea…

• Connector set containing seven common sizes of male and female connectors and two earth lead connectors.• Provides a time-saving solution and accurate connections for testing a wide variety of electrical components and connectors.• Designed for use with a multimeter with banana type connectors.• For automotive use, not suitable for use on high voltages.Connector set containing seven common sizes of male and female connectors and two earth lead connectors. Provides a time-saving solution and accurate connections for testing a wide variety of electrical components and connectors. Designed for use with a multimeter with banana type connectors. For automotive use, not suitable for use on high …

• Five pairs of coloured cables.• Each cable has shrouded crocodile clips at each end.• Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.• Five pairs of coloured cables. • Each cable has shrouded crocodile clips at each end. • Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring. • Model No. VS222Technical Specification:Contents: Red, Black, Green, White, YellowNett Weight: 0.08kgDimensions: Length: 35mm x…

The Draper 90277 Spare Test Probe Set is compatible with Draper 200 and 300 series multimeters The Draper 90277 is a set of spare test probes for 200 and 300 series multimeters. The 90277 probes are compatible with Draper 41817, 41818, 41820, 41821 and 41822 Digital Meters. Features: Spare test probe set for 200 and 300 series multimeters Specifications: Compatibility: 41817, 41818, 41820, 41821 and 41822

Spare inductive clamp for 200 and 300 range multi and clamp meters.1 x Inductive Clamp for 41821 and 41822 Digital Meters

• Crocodile clips small.• Colours: Black & Red.• Pack of 12 (6 Pairs).• Length: 55mm.• Maximum current 10 amps.Crocodile clips small. Maximum current 10 amps.• Crocodile clips small. • Colours: Black & Red. • Quantity: 12 (6 Pairs). • Length: 55mm. • Maximum current 10 amps. • Model No. CROCSMTechnical Specification:Nett Weight: 0.04kgOverall Length: 55mmPack Qty: 12 (6 Pairs)Dimensions: Length: 38mm x Height: 135mmWeight: 0.04KgWarranty: Consumable

• Crocodile clip assortment.• Quantity: 60.• Colours: Black & Red.• Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8).• Supplied in partitioned box.Assortment box of 60 crocodile clips.• Crocodile clip assortment. • Quantity: 60. • Colours: Black & Red. • Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8). • Supplied in partitioned box. • Model No. AB023CATechnical Specification:Contents: (Approximate Quantity) Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8), Colours; Black & RedNett Weight: 0.34kgDimensions: Length: 151mm x Height…