Welders

Spartus EasyCUT 40 Plasma handle S45 - 6 metres Mass cable - 3 metres Plasma welding accessories Filter reducer (built-in) Gas hose (with clamps) Multilingual manual ✅ 2 year warranty

Optimal – suitable for MIG/MAG welding machines for cored wire welding without additional protective gas Effective – achieves excellent welding results with little welding splashes when stainless steel welding High quality - for stainless steel and austenitic non-rusting metals in the pharmaceutical industry Economical - 5 kg welding wire for continuous welding Compatible - Welding wire with a diameter of 0.8 mm comes on a wire coil of 20 cm diameter and an inner diameter of 5.2 cm

SIP 05787 HG500 Inverter Plasma Cutter The SIP 05787 inverter Plasma is the ideal technology for consistently clean and highly accurate cutting of conductive materials including steel, stainless steel, copper, bronze and aluminium. Features: - 240v (20amp), 1 phase supply - 20amps - 40amps output current - 4.4 bar compressed air pressure - 6.0CFM average air consumption - Infinitely variable output power settings - 12.0mm cutting capacity (severs 12.0mm) - Digital display showing current settings - Adjustable cooldown time Specification: - Construction: PLASMA INVERTER - Input Supply: 240v (20amp) - Torch: P80 Cen. (6.0m) - Output Current: 20amps - 50amps - Duty Cycle: …

A full size, single phase 180Amp MIG welding machine ideal for general workshop use. It is perfectly suited for non intensive repair work in steel, stainless steel or aluminium. The easy-to-use, intuitive « SMART » control panel enables fast set up, just select wire size, material type & plate thickness, pull the triger & weld! This product is supplied with Euro torch (length 3m) for easy wire and liner changes. The powerful 40W wire feed motor gives a smooth and constant wire speed. For use with 5kg and 15kg wire reels & takes 0.6mm - 1mm wire. No-gas welding is possible with use of the optional no gaz kit (ref 041240). Low current consumption, suitable for use on a single

The Sip Hg2600Da Inverter Welder Is A Multi-Functional Arc/Tig Inverter Equipped With Anti-Stick Circuitry Lift-Tig Start Function And Voltage Reduction Device. Supplied With Accessories. • 230V (22A) Input Supply • 30A - 250A Output Current; 250A @ 60% Duty Cycle For Longer Welding Times Higher Than Other Brands • 1.5Mm To 10.5Mm Approximate Welding Thickness • 1.6Mm To 5Mmø Electrode Diameter Size • Lift-Tig Start Function And Anti-Stick Circuitry • Lightweight And Compact Design For Portability • Generator-Friendly; Perfect In All Applications • Powerful Voltage Reduction Device (Vrd) • Supplied With Electrode Holder And Cable Plus Earth Cable And Clamp Accessories

Powerful – the plasma cutting device showcases a maximum cutting current of 65 A with a 80% duty cycle Precise – the control panel with rotary knob and clearly visible LED display allows for quick and easy changes to the cutting current and post-gas flow time Efficient – the modern IGBT inverter in the plasma cutter provides optimal cutting parameters for any job Practical – easily choose the operation of the cutting torch in 2T or 4T mode, as well as high-frequency ignition Mobile – featuring a carrying handle and a 3 m long hose package, the high-quality P60 the plasma welding torch allows for maximum freedom of movement

Medium to heavy-duty Pressure regulation: 0.2 PSIG/100 PSIG gauges: 2.5"" steel dual Scale one-piece encapsulated seat design with internal filter and PTFE Teflon seat 7 year warranty Made in the USA

GYS - TIG metal stylus - 065857

IGBT - modern transistors have been used in the welding machine that ensure a minimum of electromagnetic interference and low power losses in the basic circuits, increasing the efficiency and reliability of the power source ✅ Hard soldering - is a process that is very similar to MIG/MAG welding, but the energy consumption is much lower. Thin sheets are connected to the brazing, which are coated with a zinc layer. With this method, the solder melts and not the material you work with Hot start – ensures the highest quality of the start of welding, first-class ignition – at the moment of ignition of the arc during a short moment, the working welding current rises from the set working level to the…

The SIP HG2400 COMPACT MIG Inverter Welder is ideal for a range of applications thanks to a range of heavy-duty and intuitive features that provide powerful performance including in demanding trade, professional and industrial applications. KEY FEATURES 50A to 200A MIG / 30A to 200A ARC output current Integrated control panel with quality digital display Designed with the latest IGBT inverter technology platform Infinitely variable output settings for high versatility,60% duty cycle for longer weld times than other brands

The HYMMA-160 is a lightweight and incredibly versatile single phase ARC / MMA welder from Hyundai.Lightweight and portable welder from Hyundai, sold as a bare unit. Welding cables not included.Weighing only 6.0kg, the HYMMA-160 inverter welder is light and portable with adjustable harness and lightweight pressed steel case. The powder coated finish gives extra corrosion resistance. Sold as a bare unit, offering an exceptional value MMA / ARC inverter welder.*Please note, welding cables are not included in the box contents of this product.Variable Control 160A Arc WelderThe Hyundai HYMMA-160 ARC welder features a stepless regulator for infinite variable control of the welding current with a

Features: Dual Usage: hand held the welder to welding without connected with any accessories or connected it with electric welding tongs. One Key Operation: thrust / current one knob regulation, increase welding current at the moment of contact. Good Heat Dissipation: heat dissipation holes are designed at the front and rear, which can effectively dissipate heat without burning the machine after long-time welding. Portable Design: mini compact welder can be used anywhere you need, which is very convenient, easy for carrying, translation and storage. Pure Copper Clamp: pure copper clip has high conductivity, easy heat dissipation and high efficiency output performance. Large Power & High Performance: …

Durable and durable Professional workshop or private welding accessories GYS original quality High quality products

Spartus EasyMIG 330 double pulse MIG handle – MB-36 – 3 metres MMA grip – 2 metres Ground cable – 2 metres MIG welding accessories Roll for steel wire 1.0/1.2 mm - 2 pieces Gas hose (with clamps)

IGBT - modern transistors have been used in the welding machine that ensure a minimum of electromagnetic interference and low power losses in the basic circuits, increasing the efficiency and reliability of the power source Synergy – a function that facilitates the selection of the optimal parameters for the welding process. With the help of the programmed data, it automatically selects the wire feed speed and the welding current. It speeds up the start of work and eliminates the risk of misadjustments that have a negative effect on the quality and appearance of the weld. ✅ Hard soldering - is a process that is very similar to MIG/MAG welding, but the energy consumption is much lower. Thin…

Features: Up to 6000 Fahrenheit degrees. The hose can be connected to any standard pressure regulator. Including five interchangeable flashlight tips. The contained tips provide a variety of lengths and heat output ranges for flames of different metals and thickness. The operator can change the flame length by adjusting oxygen and gas valve on the main body of the torch to meet his / her exact requirements. Specifications: Material: copper and aluminum alloy More Uses: jewelry repair and making, enthusiasts, crafts, metal sculptures, glass blowing, electronic products repair and manufacturing. Packing Size: 22 * 14.5 * 5.5 cm Notes: 1. Due to the different monitor and light effect, the

The Sip Hg600 Inverter Plasma Cutter Is Lightweight And Portable Yet Achieves Powerful Severing Performance Up To 25Mm Via Versatile Pfc Technology Pilot Arc Ignition And Infinitely Variable Power Output. • 230V (16A) Input Supply • 15A - 45A Output Current; 45A @ 50% Duty Cycle With Longer Cutting Times Higher Than Other Brands • 14Mm Quality Cut / 25Mm (230V) Severance Capacity • Infinitely Variable Power Output Settings For Versatility • Lightweight And Compact Design For Added Portability • Pfc Technology; Capable Of Running From 110V And 230V Single Phase Supplies Offering Energy-Saving Benefits • Pilot Arc Ignition; No Need To Touch The Torch To Piece; And Cuts

Forced Air Cooling System allows high duty cycle. Professional contour grip, heat-proof non-live torch ensures no sparks until you press the trigger. Proven wire feed system for trouble-free welding. Welds stainless and aluminium too.Specifications:Model No SUPERMIG140Brand: SealeyNett Weight: 22kgWelding Current: 30-140AWire Capacity: 0.7-5kgDuty Cycle: 100% @ 36A, 75% @ 41A, 50% @ 55A, 20% @ 80ACooling System: Forced AirSpot Welding Timer: NoGas Type: CO2, Argon, CO2/Argon MixTorch: 2m Non-LiveSupply: 230VAbsorbed Power: 2.8kWCase Size: CompactWeight: 22kg

Great for a variety of applications like Bushing removal and installation, wire cutting and more Works on spatter removal from the inside and outside of welding nozzle Needle nose grip for pulling and a small serrated hole for MIG tips Useful and convenient for any pre-welding task

Easy and quick installation of consumables Intuitive control panel with a single potentiometer to adjust cutting intensity HF-free priming to avoid electromagnetic disturbance Manual air pressure adjustment (2.5 < 6.5 bar) with front bargraph Automatic torch detection