Taps Franke

Pull out spray Twin Lever Control Ceramic Disc Valves Suitable for High Pressure Systems Suitable for Low Pressure Systems

¼ Turn Operation, Ceramic Disc Valves Surface-Mounted with Swivel Spout Modern Design, Built-In Aerator Suitable for High & Low Pressure Systems Perlator Mixes Air Into Water to Give Champagne-Like Flow

Perlator for champagne-like water flow Ceramic disc valve Control type: Single lever Not Suitable for Gravity-Fed Systems 5 Years Guarantee

Soft elegant lines of the Tulip faucets emulate its delicate namesake perfectly Franke’s tulip faucets will compliment any kitchen design ,while offering the ultimate maneuverability and ease of use more→9 1/2" tall hot water filtration faucet for use with under-the-sink filtration system Old World Bronze finish to beautifully tie your kitchen together Pair with other faucets in the Franke Tulip line for a consistent look throughout the kitchen

A contemporary Franke Athena tap in chrome with a polished finish Tap Dimensions: Overall Height - 349mm. Spout Height - 219mm. Spout Reach - 194mm. Base/Handle Width - 144mm This tap requires a min more→imum water pressure of 0.5 bar to operate properly Perlator mixes air into the water to give a champagne-like flow Comes with a 5-year manufacturer's guarantee

Installation of the mixer on the right side. Water flow 9 l/ min (3 bars). length of the pull-out hose: 1500 mm. Return valve (isolating the return of water from the pull-out spout). Total height of more→the tap: 500 mm. The height to the end of the spout: 259 mm. Range of the spout: 233 mm.

The reach of the pull-out hose is 600 mm. Non-return valve (isolating the return of water from the pull-out spout). invisible perlator neoperl Cache. Highlighting of the luminaire LED water stream. I more→ncluded: power supply 100-240 V/ working Voltage 6.75 V/ cable length 110 cm, manual switching with automatic shut-off after 45 minutes. Tuchprotect - an innovative screed eliminating the risk of burns. Recommended Distance from the centre of the mounting hole: 62 mm. Total height of the spout: 419 mm. The height to the end of the spout: 259 mm. Range of the spout: 225 mm.

Range of mixer lever movement: 45/45. Installation of the mixer on the right side. Water flow 8.5 L/ min (3 bars). recommended Distance from the centre of the mounting hole to the wall: 50 mm. Total more→height of the tap: 470 mm. The height to the end of the spout: 199 mm. Range of the spout: 182 mm.

Contemporary polished tap Pull out nozzle Fitted with ceramic disc valve Product height: 436mm, Spout reach: 230mm Base diameter: 43mm, Tap cut out: 35mm Minimum hot water flow rate is 1.70 litre more→s per minute at 0.3 bar water pressure Minimum pressure: 0.5 bar

Ceramic head Ø 25. Control lever on the side of the mixer. Dimension of the mounting hole Ø 33.5 mm. The total height of tap 599 mm. The height to the end of the spout 244 mm. Range of the spout 230 more→mm. Rotation of the spout in degrease of 360 °.

20-inch reach pull out nylon hose offers maximum coverage Classic long-lever handle Dual functioning spray head with full and needle spray 110-degree spout swivel 1.75 gpm flow rate 10-inch base more→plate included for 1 or 3 hole installation 1-3/8-inch hole required for install Franke stands behind this product with a limited lifetime warranty. 5-year warranty on finish

4180C

Franke 3699 Ceramic Single Lever Faucet Cartridge for Single Handle Franke Faucets

- Elegant, modern three-way tap. Separate spouts for normal and filtered drinking water. L Spout. Solid stainless steel. - The FRANKE three-way tap made of solid stainless steel provides unfiltered h more→ot and cold water as well as cold, filtered water. The filtered water flows inside the fittings through its own pipe and is controlled with a separate control lever. The technology necessary for the filter process is installed under the sink to save space. Model: FRANKE tap - branded product from FRANKE, only one tap on your sink kitchen sink fitting, separate spout for filtered water, 360° swivelling spout, controls for unfiltered water (right), for filtered water (left), flexible metal connection h…

Dispenser for liquid soap or washing-up liquid. Liquid container: 350 ml plastic. Mounting hole ⌀35 mm. Rosette ⌀50 mm. Convenient top filling. Total height of the dispenser: 265 mm. Dispenser range: 85 mm.

The dispenser refills from above, eliminating the need to remove the dispenser from the counter 12-oz container for hand soap, detergent or lotion Designed to match the Planar 8 line of kitchen fauc more→ets 1-1/8-inch hole required for installation Satin nickel finish ties your kitchen design together, a great choice for stainless steel match