Welders GYS

Applications: Marine Construction, Railway Construction, Dumpster, Trailer, Aeronautics & Aerospace. Extremely resistant to corrosion and seawater Good mechanical resistance Gas protection according to standard EN ISO 14175 Classifications: AWS 5.10: ER5356 | EN ISO 18273: S Al 5358

The GYSMI 200P ensures professional welding on steel, cast iron and stainless steel up to 12mm thick. It is equipped with the latest electronic inverter technologies including Hot Start, which makes for easy arc striking, Anti Sticking, that reduces the risk of electrodes sticking to the work piece and Arc Force whic regulates the arc length ensuring a strong arc. The unit has a high duty cycle capable of welding 45 x 3.2mm electrodes per hour!! The Welding current is adjustable from 10 to 200Amps enabling the use with electrode sizes 1.6 to 5mm. It has a single-phase power supply (240v) with protection against overvoltages up to 400v (PROTEC 400). The GYSMI 200P is generator friendly

X-type paint stand - allows safe work on bumpers due to the adjustable height and robust construction. load capacity 270 kg. Lightweight and portable. anti-slip foot. Height of 876 Adjustable to 1193 mm. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Applications: pipes and structures of fine thickness less than or equal to 3mm and for penetration passes Reserved for assemblies not exceeding 350°c in service temperature Suitable for corrosive environments: acids, chlorine Corrosion resistant Classifications: AWS A59: ER 316L | EN ISO 14343-A: W9 12 3 L Gas protection according to standard EN ISO 14175

The information below is per-pack only High quality flux cored MIG wire 1mm/4.5kg wire roll Suitable for 200mm wire reels For gasless welding

Classification: AWS 5.18 : ER 70S-6 Classification: EN ISO 14341-A : G46 4 M21 3Si1 / G 42 3 C1 3Si1 Classification: DIN 8559 : SG2 Excellent ignition properties Great arc stability onn high currents A good, corrosion - resistant wire Enables wleding in all posistions Polarity: DC + Gas protection in compliance with EN ISO 14175 100% CO2 (C1) or Argon / CO2 (M21, 8 < 20% CO2) Applications: Automotive producton, railway construction, shipbuilding, construction, tanks and boilers

Ultra compact & portable weighing only 2.2kg, the GYSARC 100 v2 ensures quality welds on steel, cast iron and stainless steel up to 4mm thick. Inverter technology provides advanced features including; Hot Start: makes arc striking easier. Anti Sticking: reduces the risk of electrode sticking to workpiece. Arc Force: electronic assistance in maintaing a strong arc. Welding current adjustable from 10 to 100Amps from a standard household power supply (230V - 13Amp). Welds electrode sizes Ø 1.6mm, 2mm & 2.5 mm. Supplied complete with earth cable and electrode holder.

With its technology, the TIG 160 is able to start on LIFT, easy-to-use and mandatory in certain areas where HF is not allowed It offers you the essential parameters to get the best welding that a more advanced full HF TIG can provide with downslope (adjustable by the user) and postgas (automatically set up), unlike a simple MMA unit equipped with a valve torch The gas connector is designed for any professional TIG torch The TIG 160 offers you a complete MMA mode with adjustable Hot Start, Arc Force and Anti Sticking to weld standard rutile, steel, stainless steel, cast iron and basic electrodes to the highest standard

GYSARC 160 Inverter MMA (Arc) Welder 160Amps. Ultra compact & portable weighing only 2.9kg, the GYSARC 160 ensures quality welds on steel, cast iron and stainless steel up to 10mm thick. It has a welding current from 10 to 160Amps from a standard household 230V power supply (up to 3.2mm rods on 13Amp) can can weld electrodes from Ø 1.6 to 4mm. Advance features include, Hot Start: makes arc striking easier, Anti Sticking: reduces the risk of electrode sticking to workpiece, Arc Force: electronic assistance in maintaing a strong arc. Supplied complete with earth cable and electrode holder.

Gas welding accessories TIG filler electrodes for welding in direct current For stainless steel (316LSi), 1.6 diameter, 1000mm length, 315 electrodes High quality European manufactured

Compatible with torches: TPT 25, TPT 40, MT 25K, MT 35K MT 45.

Durable and durable Professional workshop or private welding accessories GYS original quality High quality products

Applications: Piping, penetration passes Good quality assembly of structural steels Excellent mechanical qualities, in particular in TIG welding on small thicknesses. Gas protection according to standard EN ISO 14175 100% Argon (I1) Classifications: AWS 5.18: ER70S-6 | EN 636A / EN ISO 14341A G/ W3Si1 | DIN 8559: WSG2

Made of rare earth oxide (non-radioactive electrode) Versatile, it can be used in direct current (DC) for steel and stainless steel and in alternating current (AC) for Aluminum Good starting quality Better lifespan. Rare earth oxide compound. Classification: ISO 6848 | EN26848