Welders GYS

A full size, single phase 180Amp MIG welding machine ideal for general workshop use. It is perfectly suited for non intensive repair work in steel, stainless steel or aluminium. The easy-to-use, intuitive « SMART » control panel enables fast set up, just select wire size, material type & plate thickness, pull the triger & weld! This product is supplied with Euro torch (length 3m) for easy wire and liner changes. The powerful 40W wire feed motor gives a smooth and constant wire speed. For use with 5kg and 15kg wire reels & takes 0.6mm - 1mm wire. No-gas welding is possible with use of the optional no gaz kit (ref 041240). Low current consumption, suitable for use on a single

Inverter technology to ensure quality cut on all types of steel (mild, stainless, tempered, HSS), aluminium, copper, etc Consumables replacement is fast & easy for a maximum productivity. Detachable 4m cutting torch for convenient storage and easy replacement. Intuitive display : - potentiometer to adjust the output current according to the thickness and material to cut. - manual adjustment of the air pressure (2.5 to 9 bars) with flowmeter on the front panel. HF-free ignition to prevent disturbances that could damage nearby electrical equipment. Reinforced structure & non-slip rubber feet. Compact, lightweight and portable. Premium cutting quality : the torch is air cooled offering a great …

High quality flux cored MIG wire 1mm/4.5kg wire roll Suitable for 200mm wire reels For gasless welding

Applications: Piping, penetration passes Good quality assembly of structural steels Excellent mechanical qualities, in particular in TIG welding on small thicknesses. Gas protection according to standard EN ISO 14175 100% Argon (I1) Classifications: AWS 5.18: ER70S-6 | EN 636A / EN ISO 14341A G/ W3Si1 | DIN 8559: WSG2

Applications: Marine Construction, Railway Construction, Dumpster, Trailer, Aeronautics & Aerospace. Extremely resistant to corrosion and seawater Good mechanical resistance Gas protection according to standard EN ISO 14175 Classifications: AWS 5.10: ER5356 | EN ISO 18273: S Al 5358

The PROGYS 180 is a powerful inverter stick welder designed for professional workshop/maintence use. The unit ensures professional welding on steel, cast iron and stainless steel up to 10 mm thick. It is equipped with the latest electronic inverter technologies including Hot Start, that makes for easy arc striking, Anti Sticking, which reduces the risk of electrodes sticking to the work piece, and Arc Force, which regulates the arc length ensuring a strong arc. It has a high duty cycle with welding current adjustable from 10 to 180Amps enabling the use with electrode sizes 1.6 to 4mm. Single-phase power supply (240v) with protection against overvoltages up to 400v (PROTEC 400). Generator

Versatile, it can be used in direct current (DC) for steel and stainless steel and in alternating current (AC) for Aluminum Good starting quality Ø 2.4 mm / Length 150 mm Better lifespan Rare earth oxide compound Classification: EN26848 Classification: ISO 6848

Perfectly suited to repair, maintain and work steel Portable, weighs only 14 kg Low current consumption, pluggable on a single domestic 230V - 13A socket Adaptable to Ø 100 mm wire reels 1 process: NO GAZ for outdoor welding

Applications: pipes and structures of fine thickness less than or equal to 3mm and for penetration passes Reserved for assemblies not exceeding 350°c in service temperature Suitable for corrosive environments: acids, chlorine Corrosion resistant Classifications: AWS A59: ER 316L | EN ISO 14343-A: W9 12 3 L Gas protection according to standard EN ISO 14175

E-hand (MMA) welding suitable for welding most coated electrodes: rutile, stainless steel, cast iron and basic (up to Ø 4.0 mm). Good ignition properties thanks to high no-load voltage and constant welding performance Consistent melting performance through DC current High stability of the welding current despite fluctuations in the supply voltage. Portable device with light weight of only 2.9 kg, very small footprint and can therefore be stored anywhere (shelf, trolley, etc.), 1 carrying strap for easy transport.

The GYSMI 200P ensures professional welding on steel, cast iron and stainless steel up to 12mm thick. It is equipped with the latest electronic inverter technologies including Hot Start, which makes for easy arc striking, Anti Sticking, that reduces the risk of electrodes sticking to the work piece and Arc Force whic regulates the arc length ensuring a strong arc. The unit has a high duty cycle capable of welding 45 x 3.2mm electrodes per hour!! The Welding current is adjustable from 10 to 200Amps enabling the use with electrode sizes 1.6 to 5mm. It has a single-phase power supply (240v) with protection against overvoltages up to 400v (PROTEC 400). The GYSMI 200P is generator friendly

Gas welding accessories Aluminum TIG (AlMg5) filling electrodes for AC welding 1.6mm diameter, 1000m long, 5kg, 920 electrodes Made in Europe of high quality.

Quantity: 1. The inverter technology brings excellent welding current with lower power consumption. Can weld rutile encased electrodes. Anti-sticking: optimises electrode guidance. Can weld: MIG/MAG welding with solid wire with gas cored wire welding without gas. The cored wire welding perms: using the reverse polarity system with cored wire to weld insensitive to external influences (wind, ...) to be lighter and more mobile, as no gas bottle is necessary to be ideal for outdoor work on thin sheets. The MIG/MAG burner comes with a removable burner suitable for steel 150 A with 2.20 m length and a Euro central connection for easy assembly/disassembly. Simplified display with 2 coloured …

X-type paint stand - allows safe work on bumpers due to the adjustable height and robust construction. load capacity 270 kg. Lightweight and portable. anti-slip foot. Height of 876 Adjustable to 1193 mm. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.