Computer Cases

SST-AS140B

Nickel plated copper water block with large micro channel copper base plate
Water pump integrated in the radiator
Aluminum alloy cavity pump strengthens the overall structure
Uses three-phase, six pin motor design
3 x heatsink optimised 120 mm cooling fans

Supports 430mm wide case
Supports 1U and 2U form factor
Good product with excelleny quality

Backplane support for 8 port SAS/ SATA drives and 6 Gb/s Mini-SAS SFF-8087
Supports eight 2.5"/3.5" SAS/SATA HDD/SSD
Includes three 80 x 15mm PWM fans
Independent drive status LED. Supports Micro ATX motherboards
Supports four low profile PCI/ PCIe slots. Auto lock handle for easy to fixed the 2U rackmount on the cabinet

Backplane support for 4 port SAS/ SATA drives and 6 Gb/s Mini-SAS SFF-8087
Supports four 2.5"/ 3.5" SAS/SATA HDD/ SSD
Includes three 80 x 15mm PWM fans
Independent drive status LED. Supports Micro ATX motherboards
Supports four low profile PCI/ PCIe slots. Auto lock handle design easily secures to rackmount cabinet without screws

Thin Mini-ITX compatible
Super small at 1.4 litres
Include vertical stand holder
Meet VESA Mounting Interface Standard
Easy installation with flip-up top cover

Modern design with premium aluminum exterior
Built-in six hot-swappable 2.5" drive bays with 6Gbps SAS/SATA HDD Backplane*
Vertical layout for stack effect cooling with built-in Air Penetrator fan

Improves cooling performance for any PC case
Designed for cases with fully open expansion slots
The end piece can be either hooked or plugged in
Reusable and easy to install

The Dutch brand Phanteks began with CPU coolers, which from the outset included excellent fans. The next step was to offer individual fan series. In the third step, these fans were then found in the Enthoo series. So what is, as expected, the fourth step of the young but very prestigious brand Phanteks? Exactly, housing accessories! The accessory range also includes the mounting frame for a 2.5-inch drive, which is available on the back of the motherboard with the Phanteks series Enthoo Primo, Enthoo Luxe, Enthoo Pro, Enthoo Evolv ITX, Enthoo Pro M, Eclipse P400, Eclipse P400S or Eclipse P300. In this case, the bracket accommodates both SSDs or HDDs with a height of 7 or 9.5 mm. The drive is …

6U and 600mm depth
Total load of up to 40kg
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Mode Switch Button: Easily switch between six lighting modes with the touch of a button
Colthe Switch Button: Switch between seven different colthes across all connected devices instantly
Brightness Button: Adjust ythe LED lights between five different brightness levels in a single button press with no delay time
No Software Required: Quickly adjust the mode, colthe, and brightness of all connected RGB devices without the need for software

6U and 450mm depth
Total load of up to 30kg
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Dust filter in lid and base
Side panel made of tempered glass
1 x USB 3.0

Value for money
Good product with good quality
Durable

Replace the standard BitFenix mesh strips on your current Shinobi or if you are looking to buy a new case you can purchase the Shinobi "core" case which is provided without the BitFenix logo or the mesh strips. Thus allowing you to completely customise your colour scheme for a truely unique looking system.- Material: Plastic- Compatibility: BitFenix Shinobi Midi Tower - Black BitFenix Shinobi Midi Tower - Black Window BitFenix Shinobi Core Midi Tower - Black BitFenix Shinobi Core Midi Tower - Black Window BitFenix Shinobi Core Midi-Tower - White BitFenix Shinobi Core Midi-Tower - White Window

Specifications:- Bahias Internas: 2 x 3´5, 2+2 x 2´5- Conectores: USB 3.0 x 2, USB 2.0 x 1, Audio In/Out- Format: ATX- Format FA: ATX- Medidas: 438 x 210 x 460mm- USB 3.0: Si- Material: Steel, Mesh, Plastic, Tempered Glass- Chassis Dimensions(W x H x D): 438x210x460(mm)/ 17.2x8.2x18.1(inch).- Motherboard Support: Mini-ITX, MicroATX, ATX.- Air Cooler Height Support: 163mm(6.4inch).- VGA Length Support: 380mm(14.9inch).- Cable Management Support: Up to 26mm(1.0inch).- 3.5´´ Drive Bay: 2. 2.5´´ Drive Bay: 2+2.- Fan mounts(Front): 3 x 120mm or 2x 140mm.- Fan mounts(Top): 2x 120mm or 2x 140mm.- Fan mounts(Rear): 1 x 120mm.- Included Cooling Fan(Front): 3 x 120mm Fan.- Included Cooling Fan(Rear): 1 x 12…

Compatible with all ATX size chassis
Aura Sync compatibility lets you customize and sync lighting effects with other compatible hardware.
Aura Sync compatible ARGB lighting shines brightly through a laser-etched ROG logo design.

ASUS ROG Strix G16CH-71370F050W i7-13700F Tower Intel® Core™ i7 16 GB DDR4-SDRAM 1000 GB SSD Windows 11 Home PC Black, Grey

INFINITE ARRAY OF COLORS The AZZA REGIS 902 has a beautifully designed infinity RGB front panel that provides vibrant lighting and visual effects. This can be controlled with the included controller or synced with the motherboard installed.
STAND THAT ELEVATES CNC milled 8mm thick aluminum stand that locks the REGIS in place, also elevates the case at the perfect angle to be admired from all sides.
336MM MAX. GPU length REGIS is built for the premium builds and GPUs with maximum of 336mm in length for extreme graphics performance will fit with no problem.
DUAL 240/280 RADIATOR support up to two 240 or 280 radiators are supported (with removable radiator brackets) for more flexibility and …

Antec's new Rainbow 120 RGB fan combines design with superior performance to deliver best-in-class airflow to noise ratio. It features RGB LEDs with the ability to choose between seven individual colours. Set custom effects easily—just cycle through the 256-colour gradient, the breathing, and the flashing modes with the integrated lighting controller button. The Rainbow 120 RGB fan also includes anti-vibration rubber cushions to minimize vibrations and noise. With its memory function, it is able to save your selection so that the colour mode you’ve set remains unchanged even after the PC has been turned off or rebooted. Antec’s Rainbow 120 RGB fan is backed by a 2-year limited warranty on par…

The PHANTEKS Glacier R160C is a reservoir that consists of matt acrylic glass and a transparent backplate for custom water cooling. Thanks to the multi-port design and the varied mounting options and fan brackets along with a cut-out for DDC pumps, the Glacier Reservoir is versatile in how it can be installed while also looking extra stylish thanks to the integrated RGB lighting.The PHANTEKS Glacier R160C Reservoir at a Glance:Reservoir in matt acrylic glass with 120ml fill volumeTransparent backplate in acrylic glassOptimised flow designMounting point for DDC pump and coolerDigitally addressable and synchronisable (via motherboard) RGB lighting5x G1/4 thread ports for maximum compatibilityPremium …

Synchronized your gaming station - Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome.. Air flow - 56.45 CFM. Noise level - 30.4 decibels
Analog ARGB controller - low-profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green, teal, blue, White, Purple, and rainbow), 7 LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds.
Rgb LED Ring - Nine 16. 8 million colors addressable LEDs provide balanced lighting coverage and brightness.
9 fan blade …

The GDX v2 series has been redesigned to adapt to high-performance configurations equipped with new generations of graphics cards. ATX 3.0 version with PCIe 5.0 connection which makes it extremely versatile and ideal for high-end configurations. It includes the 12VHPWR cable as standard to power Nvidia® GeForce RTX® 40 series graphics cards, without the need to use any 6+2-pin adapter and have a completely safe power supply.Features:ATX 3.0 PCIe 5.0 80Plus Gold Full Modular:- The GDX v2 series has been redesigned to adapt to high-performance configurations equipped with new generations of graphics cards. ATX 3.0 version with PCIe 5.0 connection which makes it extremely versatile and ideal fo…

The GDX v2 series has been redesigned to adapt to high-performance configurations equipped with new generations of graphics cards. ATX 3.0 version with PCIe 5.0 connection which makes it extremely versatile and ideal for high-end configurations. It includes the 12VHPWR cable as standard to power Nvidia® GeForce RTX® 40 series graphics cards, without the need to use any 6+2-pin adapter and have a completely safe power supply.Features:ATX 3.0 PCIe 5.0 80Plus Gold Full Modular:- The GDX v2 series has been redesigned to adapt to high-performance configurations equipped with new generations of graphics cards. ATX 3.0 version with PCIe 5.0 connection which makes it extremely versatile and ideal fo…