Headphone Amplifiers

Biamp Tesira Ex-Logic5 Years Warranty The Tesira Ex-Logic Is A Half-Rack Logic Box For Use With Tesira Audio Dsps. The Ex-Logic Provides Both Logic Inputs And Outputs And Through Software Can Be Configured As A Control Interface. There Are 16 Total Connections That Can Be Used As Inputs Or Outputs. 12 Of The Connections Are Designed As Logic Connections Only And Will Accept Contact Closure Or 5V Ttl For Input Or Provide A Maximum Of 40V/500Ma For Output. The Remaining Four Connections Can Also Be Used For Logic Connections Or As Variable Voltage Control Inputs (E.G. Interface To A Potentiometer). The Ex-Logic Also Provides A Serial Port For The Output Of Command Strings That Can Be Used To Send …

Two-channel 300-watt analog amplifier
The Voltera A 300.2 is a compact two-channel half-rack power amplifier with a total output power of 300 watts. The amplifier channels can be individually selected to drive 150 watts per channel into 4 ohm 8 ohm 70 V or 100 V. Power sharing is also supported allowing up to 300 watts to be delivered by any channel.

• 300 Watts total
• 2 channels
• Flexible output channel design supporting 100 V 70 V 8 ohm or 4 ohm per channel
• Each channel can drive up to 300 watts (twice the symmetric power)
• Using the included mounting accessories the halfwidth design allows single or tandem mounting in 1 RU or mounting in a variety of …

CI Amp IA60-4
A highly compact incredibly versatile four-channel custom installation amplifier the IA60-4 can be configured to deliver four channels of 60 W or 2 channels at 125 W.

Monitor Audio Installation Amplifiers are built to perform at the highest levels while taking up the least rack space. The IA60-4 may be entry-level but it features full DSP matrix configuration and offers flexible power options: it can be configured to deliver four channels of 60W or 2 channels at 125 W or using power sharing it can deliver a single channel of 250 W with no loss of performance. All this from a rugged 1U half-size space-saving design. The IA60-4 is ideal for two zone stereo applications height …

Biamp Tesira Amp 450 Bp5 Years Warranty Product OverviewThe Tesira Amp-450Bp Is An Avb/Tsn Enabled Four-Channel Poe+ Conferencing Amplifier For Use With The Desono C-Ic6 Ceiling Speaker. Capable Of Mounting Directly To The Back Of The Speaker This Amplifier Greatly Reduces Cost By Minimizing The Cabling Between The Ceiling Devices And The Rack Room. Each Amp-450Bp Comes With An Optional Mechanical Enclosure To Protect Electrical Connections And Comply With Code Requirements For Above Ceiling Installations. Tightly Integrated With Our Other Tesira Conferencing Products Biamp Is Providing The Only Av End-To-End Solution Of Microphone-To-Speaker With Standard Cat Cables. The Result Is A Conferencing …

Biamp Tesira AMP-450P Black

PA240Z is a highperformance selectable HiZ (70V/100V) or LoZ (4/8) power amplifier featuring balanced and unbalanced inputs and additional linelevel output. This versatile amplifier features builtin DSP autostandby and maximum durability. PA240Z is suitable for a vast range of AV installations.

- Highperformance Amplifier With builtin DSP and additional balanced stereo linelevel output. PA240Z features flat frequency response unmatched sonic performance excellent signal to noise ratio and extraordinarily low distortion levels.
- Adaptable to Any AV Installation Switch between LoZ and HiZ to accommodate any type of loudspeaker installation. Select 1 Channel of 240W into a 70V/100V line …

ZONE4 Pre-Amplifier
5 Years Warranty

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.

There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display) via …

FiiO R7 is the brand’s first-ever desktop digital audio player equipped with a high-performance ESS Sabre DAC chipset and high-power THX-788+ desktop-grade amplification chipset. It brings you the perfect combination of input and output options allowing you to use it independently or use it with other devices on your desktop chain. FiiO R7 supports high-resolution PCM and native DSD audio signal decoding. With Qualcomm’s 8-core Snapdragon 660 SoC chipset and 4 GB of RAM, R7 boasts open Android 10 OS with support for countless streaming and media applications!
FiiO’s First-Ever Desktop Audio Player - FiiO is a pioneer brand in the HiFi audio industry. They are known for their outstanding range …

Stereo Pre-Amplifier with Network Streaming & CD-Player
Tired of big expensive stacks with tons of different source devices? No longer an overview of the chaos of the umpteen remote controls lying around? Then the IOTAVX NP3 is the solution! To call this device just a network player would certainly not do it justice. The NP3 combines convenient streaming functions with a high-quality CD drive DAB + and FM radio and numerous other connection options. Playback via USB audio or Bluetooth (AptX) is just as convenient as using it as a DLNA / Upnp renderer. Thanks to the integrated volume control the NP3 can also be used as a full-fledged pre-amp.

Streaming
The NP3 can be connected to your home …

The Desono EX-S8 is an 8 two-way surface mount loudspeaker that provides detailed voicing with projection. It is an excellent fill or distributed loudspeaker for systems where pristine voice clarity higher output and more bass is desired.

Designed for easy and fast installation our innovative patented ClickMount brackets provide installers with two distinct mounting options. The ClickMount pan-tilt bracket provides indexed aiming control and allows for mounting EX Series quickly in either vertical or horizontal orientation without moving the bracket position. The ClickMount U-Bracket is also available for low profile mounting or exterior use and includes the ClickPlug with an integrated gland …