Headphone Amplifiers

Yamaha XMV4140D
Product Overview
A Comprehensive Line-Up to Power Your Sound Solution
XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed s more→pecifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.

Key Features
High Impedance and Low Impedance . . . Or Both
Installed sound applications often demand both high and low impedance connectivity in the same venue requiring separate dedicated amplifiers or an external transformer. XMV power amplifiers however can operate in both …

CI Amp IA60-4
A highly compact incredibly versatile four-channel custom installation amplifier the IA60-4 can be configured to deliver four channels of 60 W or 2 channels at 125 W.
 more→/> Monitor Audio Installation Amplifiers are built to perform at the highest levels while taking up the least rack space. The IA60-4 may be entry-level but it features full DSP matrix configuration and offers flexible power options: it can be configured to deliver four channels of 60W or 2 channels at 125 W or using power sharing it can deliver a single channel of 250 W with no loss of performance. All this from a rugged 1U half-size space-saving design. The IA60-4 is ideal for two zone stereo applications height …

Two-channel 300-watt analog amplifier
The Voltera A 300.2 is a compact two-channel half-rack power amplifier with a total output power of 300 watts. The amplifier channels can be individually s more→elected to drive 150 watts per channel into 4 ohm 8 ohm 70 V or 100 V. Power sharing is also supported allowing up to 300 watts to be delivered by any channel.

• 300 Watts total
• 2 channels
• Flexible output channel design supporting 100 V 70 V 8 ohm or 4 ohm per channel
• Each channel can drive up to 300 watts (twice the symmetric power)
• Using the included mounting accessories the halfwidth design allows single or tandem mounting in 1 RU or mounting in a variety of …

PERFORMANCE - Greatly improves headphone sound from any device with a USB output.
VERSATILITY - Connects easily to USB-C ports. (Adapter for USB-A ports also included)
FEATURES - ES9219 more→Sabre DAC chip with Quad DAC+ technology, 32-bitHyperStream III DAC architecture and Time Domain Jitter Eliminator. Also supports Supports hi-res audio up to 32-bit/384kHz PCM, DSD256 and MQA.
HIGH QUALITY - Gold-plated 3.5mm headphone socket, silver-plated copper conductors, twisted for high signal purity.
CONNECTIONS - USB-C Input to 3.5mm Headphone Jack.
INCLUDES, 1 x GO link, 1 x Quick Start Guide, 1 x USB-A to USB-C adapter, 1 x USB-C Charging Adapter 1 x Instruction Card…

Pm11225 Years WarrantyMultifunctional Stereo Pre-AmplifierThe Pm1122 Is A Stereo Pre-Amplifier Ideal For 1 And 2 Zone Applications Where You Want To Have A Different Volume Setting And Where A Differe more→nt Sound Source Is Needed. This Pre-Amplifier Has 2 Stereo Output Zones And Up To 10 Inputs (6 Mic-Line And 4 Line Inputs). All Mic/Line Inputs Can Be Assigned To Zone 1 Zone 2 Or Both Output Zones What Allows You To Create A True 2-Zone System.Multiple Remote Control Options Are Available For The Pm1122. The Pm1122r Is An Analogue Wall Control Panel That Has Music Level And Micro Mix Level Control And Also A Line Input Selector. The Pm1122rl Analogue Wall Control Panel Has The Same Functions As …

Mustang Micro is a complete personal guitar amplifier featuring a wide selection of tones from the wildly popular Mustang series amps. Plug Mustang Micro directly into your guitar, connect your favori more→te wired headphones, and choose your perfect amp and effect settings. It’s ideal for any player from beginner to pro, making it quick and easy to get great tones when jamming at home or on the go. Mustang Micro’s 1/8” stereo headphone out allows the flexibility to use your favorite wired headphones or earbuds and silently play with a responsive touch and feel without annoying latency. Want to jam along with tunes from your music library or favorite streaming service? Mustang Micro …

The EarMen Eagle is a high-performance pocket-friendly USB DAC and headphone amplifier. Its compatible with both Apple and Android mobile devices and can play all 32bit/384kHz formats including PCM DX more→D and DSD. The device is powered by the ESS ES9280C PRO an audiophile-grade SABRE DAC which provides high audio performance with Total Harmonic Distortion plus Noise (THD+N)

In addition to many small portable devices on the market, EarMen wants to set the standards. Our team has specially designed balanced, battery powered device - small in size but strong in performance, more→which will give you a unique experience you have never had before.Let the music be with youThe most important feature of the device is its ability to provide clear and full-spectrum audio experience. Colibri uses the latest state-of-art hardware and software solutions in its construction, all of which come together to provide a natural and detailed listening experience.The mid and high range frequencies beautifully complement the lowest tones, with consistent balance across all spectrums, resulting …

The Desono EX-S8 is an 8 two-way surface mount loudspeaker that provides detailed voicing with projection. It is an excellent fill or distributed loudspeaker for systems where pristine voice clarity h more→igher output and more bass is desired.

Designed for easy and fast installation our innovative patented ClickMount brackets provide installers with two distinct mounting options. The ClickMount pan-tilt bracket provides indexed aiming control and allows for mounting EX Series quickly in either vertical or horizontal orientation without moving the bracket position. The ClickMount U-Bracket is also available for low profile mounting or exterior use and includes the ClickPlug with an integrated gland …

*ESS Sabre ES9068x2 DAC chip, RT 6863 x6 OPA chips,supporting up to DSD512 Native, PCM768 KHz@32Bit decoding. Optical, Coaxial and USB support MQA full decoding and rendering.
*Qualcomm QCC5125 more→Bluetooth 5.0 module supports SBC/AAC/aptX/aptX LL/aptX HD protocol.
*6.35mm single-ended Headphone amp output, driving 16-300 ohm headphones.
*The total harmonic distortion ratiowhich has been measured is -120dB (0.00009%), signal-to-noise ratio and dynamic range are 125dB.
*3-inch LCD screen, control knob and EverSolo mobile controller app is available for easy control.

The Tangent DAC II a high-end hi-fi DAC is equipped with a Sabre ES9023 24-bit Stereo Audio DAC. It has multiple digital inputs like coaxial optical digital and USB as well as the latest AptX Bluetoot more→h technology for efficient wireless streaming. Further functionality includes the use as a headphone amplifier. With both RCA and XLR balanced outputs it pairs well with Tangents PowerAmpster II or other power amplifiers. Its sturdy construction and built-in power supply ensure durability and safety during use. The DAC II is designed for convenience with an intuitive interface and compact design. It suits music enthusiasts desiring top-tier sound quality or those intending to enhance their audio …

The Astell&Kern ACRO CA1000T Headphone Amplifier & DAC is a completely portable all-in-one system for headphone enthusiasts. A cornucopia of connectivity options are available for inclusion in audioph more→ile-grade desktop systems with inputs and outputs that cover links from source to speaker. Monitor everything from the comprehensive LCD touchscreen and hear the difference.The CA1000T uses advanced decoding support ES9039MPRO dual-DACs and a Twin Triode KORG Nutube tube design to maximise your listening experience with high-resolution conversion capabilities. Through sensitive in-ear monitors power-hungry headphones and everything in between find the joy in crisp dynamic listening.

ZONE4 Pre-Amplifier
5 Years Warranty

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can p more→lay music that comes from one of the 4 music sources you can connect.

There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display) via …

REVAMP8250 Amplifier
5 Years Warranty

This 8-channel bridgeable power amplifier is probably the most versatile class-D amplifier in the range. Combined with a pre-amplifier or ma more→trix the REVAMP8250 can be used to create 8 zones in mono 4 zones in stereo even 4 bridged mono or 2 bridged stereo systems can be created. The amplifier has an intelligent variable speed cooling fan built-in to keep the unit cool at all times. When installing the REVAMP8250 a handy input overload LED indicator on the rear and amplifier clip indicator on the front will guarantee a fast and hassle-free installation. Due to the amount of channels limited amplifiers are needed in your project. This will save money and …

REVAMP4240T Amplifier
REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The more→unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

REVAMP4240T is the ideal amplifier for applications with 4 zones in mono 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.

In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features …

REVAMP4100 Amplifier
5 Years Warranty

REVAMP4100 is a professional digital 4-channel amplifier with high power Class-D power amplifier modules inside. The unit has extended speak more→er and amp protection circuits inside for DC protect over current protect over temperature protect and protection against input overload.

The REVAMP4100 amplifier has 4 individual amplifier channels but can be bridged into 2 stereo channels

Previously APART
- Features
- Type Power Amplifier
- Power Output 4 x 100W
- Weight 3.5 Kg
- Dimensions W x D x H 483 x 230 x 44 mm
- Warranty 5 Years

REVAMP2250 Amplifier
5 Years Warranty

REVAMP2250 is a professional 2-channel digital power amplifier with 2 x 350 watts output power @ 4 ohms but is also bridgeable (1 x 700 wat more→ts @ 8 ohms). The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (6 presets). An example of a preset is the combination CH1 subwoofer and CH2 trafo load. In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output allowing you to use 100 volt speakers as top speakers combined …

REVAMP2150L Amplifier
5 Years Warranty

The new all-purpose REVAMP2150 is a professional 2-channel digital power amplifier with 2 x 165 watts dynamic output power @ 4 ohms that c more→an easily be bridged into a powerful 330 watts @ 8 ohms single amplifier. This class-D amplifier is convection cooled without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times.

The unit has multiple speaker and amp protection circuits built inside for DC protect over current protect over temperature protect and protection against input overload. During the configuration of the input gain the rear clip LED indicator is very useful and handy for a fast and easy installation.…

REVAMP2120T Amplifier
5 Years Warranty

Immaculate sound performance extremely reliable maintenance-free this is how we would describe our latest REVAMP2120T. This 2-channel digit more→al power amplifier provides 2 x 120 watts output power @ 100 volts or @ 4 ohms that can easily be bridged into a powerful 240 watts @ 100 volts or 8 ohm single amplifier.

The REVAMP2120T is a convection cooled class-D amplifier without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times. The ergonomic and efficient 1U design has a galvanic separated toroidal output transformer built in to avert external influences & disturbances. During the configuration of the input …

REVAMP2060T Amplifier
5 Years Warranty

The new versatile REVAMP2060T is a professional 2-channel digital power amplifier with 2 x 60 watts output power @ 100 volts or @ 4 ohms th more→at can easily be bridged into a powerful 120 watts @ 100 volts or 8 ohms single amplifier. This Class-D amplifier has a galvanic separated toroidal output transformer built in to avert external influences & disturbances.

A fast installation tool on the rear is the clip LED indicator that can be used during the configuration of the input gain. The convection cooled REVAMP2060T has no fan inside which implies that the amplifier works silent and stays dust-free at all times. This maintenance-free feature together …

REVAMP1680 Amplifier
5 Years Warranty

REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 100 watts output power @ 4 ohms but the unit is also bridgeable t more→o 8 x 200 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low less than 0.5 watts!

Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input audio sense... The trigger input is ideal when you want to switch on the power amplifier automatically using …

REVAMP1120T
5 Years Warranty

Class D 1x 120W Amplifier

Our newest single channel professional power amplifier the REVAMP1120T is a unique and versatile Apart desi more→gn with 1 x 120 watts output power @ 100 volts (or @ 4 ohms). The REVAMP1120T is a class-D amplifier with a builtin galvanic separated toroidal output transformer free of external influences and disturbances. Convection-cooled and excluded from cooling fans this amplifier is reliable maintenance-free silent and dust-free. The rear clip LED indication on the input gain together with the ease of installation via multiple input and link connection options make the REVAMP1120T the preferred installer’s choice. Completely built …

MA60 Amplifier
5 Years Warranty

The compact 9.5” MA60 mixing amplifier has an unseen intuitive user friendly interface and ground breaking logical rear panel. The unit come more→s with 1 mic/line input and 2 stereo line mono summed inputs. On the rear you can find smart left-to-right 4 level priority system for audio routing an emergency input paging mic with chime and a 24VDC override output. The design of the MA60 is a true redefinition of the mixing amplifier that goes back to the basics. Everyone will understand how to install or operate these units in a blink of an eye.

Previously APART
- Features
- Type Mixing Amplifier
- Weight 2.6 Kg
- Dimensions W x D x H 241.5 x 250 …

Meet the latest flagship Android music player from the house of FiiO, the FiiO M17. Featuring a Top-of-the-line ES9038Pro Dual DAC chipset, the M17 provides you with impeccable high-resolution audio d more→ecoding performance. It is supported by THX788 Pro, a desktop-grade powerful THX amplifier for tremendously powerful output. The M17 is capable of providing up to 3000mW of power, that is up to 3W of power through its balanced output. Unleash The Power Of True Flagship With the M17 FiiO M17 is designed for audio enthusiasts who give utmost perfection to every single detail from their music. It features a powerful Dual DAC chipset with flagship-grade ES9038Pro DAC chips. ES9038 Pro is a flagship …