Fish Finders

This ice fishing bundle includes the STRIKER Vivid 5cv fishfinder and everything you need for a great day on the ice. The GT8HW-IF transducer with Garmin CHIRP traditional sonar offers adjustable beam angles and crystal-clear images with remarkable target separation. See your jig or weighted bait, as well as the depth of fish swimming into the sonar beam. You can even watch your jig being lifted or dropped — and see whether fish are moving toward or away from it.

SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen. Accurate Heading Even at Low Speed - Its heading output rate at 10 Hz and accuracy of plus or minus 3 degrees ensures your chart orientation and boat heading line match up with reality, even at trolling speeds or when dead in the water.

Raymarine Part A18088 for ST4000 Full compatibility with Raymarine Autopilot ST4000 device Brand Parts & Parts Raymarine

Made using the highest quality materials Tested for durability Uses the latest technology to aid anglers

Transom mount transducer 83/200 KHz, 60/20 beam angle Temperature sensor 20' cable with 7 pin plug International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees meant to be glued to your inner hull with a slow-cure epoxy, which is included International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Designed to mount to the inside of your hull and transmit the sonar signal through the hull itself Single/dual transducer with 15-foot cable and slow-cure epoxy included Compatible with many PiranhaMax, FF and Matrix series Humminbird sonar systems International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Designed to connect a SimNet product to an NMEA backbone Cable Length: 0. 5 meters (1. 6 feet) Constructed of marine-grade materials Color: Black

Product Type: FISHING_EQUIPMENT Package quantity: 1 No batteries required Country of Orgin: Hungary

Product Type: FISHING_EQUIPMENT Package quantity: 1 No batteries required Country of Orgin: Hungary

Package dimensions (L x W x H): 23.876 cm x 16.51 cm x 2.54 cm Package weight: 295.1 g Country of origin: Belgium Number of pack: 1

Wireless Colour Fish finder with Bait Boat attachment Sensor with a range of 150 metres. Colour Screen, easy attach to bait boats No modification required to your boat to fit this fish finder which will easily fit any bait boat including: Microcat, Procat, Viper, Waverunner, Atom, Shuttle, Lakestar and all other types of bait boats. Designed to highlight gravel and sand bars, gullies, plateaus, clear spots, weed beds and many other under water features. It will show carp holding areas and clear changes in depth and temperature. This fish finder is designed to fit all bait boats and no assembly is required, you simply attach the product to your bait boat with the ready to fix Sensor kit, and …

Wireless Fish finder with Bait Boat attachment Sensor with a range of 200 metres. Easy attach to bait boats No modification required to your boat to fit this fish finder which will easily fit any bait boat including: Microcat, Procat, Viper, Waverunner, Atom, Shuttle, Lakestar and all other types of bait boats. Designed to highlight gravel and sand bars, gullies, plateaus, clear spots, weed beds and many other under water features. It will show carp holding areas and clear changes in depth and temperature. This fish finder is designed to fit all bait boats and no assembly is required, you simply attach the product to your bait boat with the ready to fix Sensor kit, and you are ready to go.…

Wireless Fish finder with Bait Boat attachment Sensor & additional sensor for portable use, both with a range of 200 metres. Easy to attach to bait boats No modification required to your boat to fit this fish finder which will easily fit any bait boat including: Microcat, Procat, Viper, Waverunner, Atom, Shuttle, Lakestar and all other types of bait boats. Designed to highlight gravel and sand bars, gullies, plateaus, clear spots, weed beds and many other under water features. It will show carp holding areas and clear changes in depth and temperature. This fish finder is designed to fit all bait boats and no assembly is required, you simply attach the product to your bait boat with the ready …

Wireless Colour Fish finder with Bait Boat attachment Sensor & additional sensor for portable use, both with a range of 150 metres. Colour Screen, easy attach to bait boats No modification required to your boat to fit this fish finder which will easily fit any bait boat including: Microcat, Procat, Viper, Waverunner, Atom, Shuttle, Lakestar and all other types of bait boats. Designed to highlight gravel and sand bars, gullies, plateaus, clear spots, weed beds and many other under water features. It will show carp holding areas and clear changes in depth and temperature. This fish finder is designed to fit all bait boats and no assembly is required, you simply attach the product to your bait …

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & Temp This replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.

Reactor 40 SmartPump V2

Great Product

Fishfinder watch-style Colour: Black Specification: 1.77 inch LCD Display 128×160 pixels Display backlight: On/Off, white LED Depth range: 45m

Simrad Antenna Holder made from stainless steel with 5.47 yrd (5 m) Antenna for quick assembly and disassembly of a VHF Antenna for your boat, motor boat. As the cable is not on the rod is fixed, but directly to the mount is not need to cut through or out the aerial cable away. Thanks to attach the cable to the holder is the connecting Antennenstabes quickly and easily remove the detachable shall be used to screw the bracket screws and they are ready. Simrad Antenna the holder is also available in the plastic material (Manufacturer No. AA000223)

Mounting kit cpt-dv/cpt-dvs probes Probe Water Sports Model number: R70439