Parts for Drones & RC models

prices on 356 models

£100

clear

Show

with photos

Brushless Motor 1400KV 40A ESC 8060 Propeller 9G Micro Servo 2pcs for RC P

24.71Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle calibration funtion: Throttle range can be calibrated to be compatibl more→e with different transmitters. User programmable. Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field. Timing can be changed to be suitable for different brushless motors. This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5-1.7kg/cm (4.8V-6V) torque. Pretty strong regarding its size. Full protection: low voltage cutoff protection / over-heat protection / throttle signal loss protection.…

Brushless Motor 2200KV 30A ESC 6035 Propeller 9G Micro Servo 2pcs for RC P

22.89Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Compatible with DJI AIR 2S/Mavic Air 2 Propeller Guards Removable Propelle

13.71Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: △Compatible with: It is specially designed for DJI AIR 2S/Mavic Air 2 drone. △High quality material: high toughness ABS material, which can effectively buffer impact force, fine workmanship, more→wear-resistant and durable. △Effective protection: it is used to isolate the blade, reduce the risk of blade injury, and avoid foreign matters from hitting the blade to cause damage and improve flight safety. △Lightweight design: only weighs 74g, does not affect the normal flight of UAV, easy to carry. △Quick disassembly and assembly: snap design, quick disassembly and quick assembly, color matching of the fuselage has texture. Specifications: Item name: Propeller Guard Main material: ABS Color:…

Compatible with DJI Mavic Air 2 Drone Float Holder Landing Gear Buoyancy S

25.35Buy!
£

Joom.com

Delivery: in United Kingdom

Report

The floating landing kit can make drones take off and land on the calm water. It can also effectively avoid the drone dirty or damaging the gimbal during the landing and taking off. It is compatible w more→ith DJI Mavic Air 2 Drone. Features: The buoyant landing gear protects your ?Mavic Air 2 Drone when it lands/takes off over the water and shoots video over the water to make your flight more fun. It also serves as landing gear and elevating the foot, reducing the impact of the aircraft on the ground during landing and providing good protection for the camera and head of the drone. Effectively increase by 60mm. Non-destructive installation design, easy to install, it can be disassembled. With a …

Compatible with Tamiya 1/14 RC Tractor Truck Aluminum Alloy Front & Rear T

78.48Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: These tires are specially designed for 1/14 Tamiya RC Tractor Truck. Made of fine aluminum alloy and rubber, durable and sturdy to use for a long service time. Also, easy to install and disa more→ssemble, and you can get the perfect performance on the model car. Fine workmanship and perfect style, help to improve your car appearance. Specification: Item Name: Front & Rear Tires Set Color: Black and silvery Material: Aluminium Alloy, Rubber Tyre Diameter: 85mm Tyre Width: 45mm (Rear); 20mm(Front) Wheel Rim Drive Hex: 12mm Weight: 148g/1pcs (Rear);83g/1pcs (Front) Package Size: 17 x 14 x 9.5cm Package Weight: 805g Note: There could be a few deviations due to manual measurement. Thank you …

[CS] For DJI Mavic Mini 2 Drone Anti-glare Lens Hood Gimbal Protective Sha

5.65Buy!
£

Joom.com

Delivery: in United Kingdom

Report

For DJI Mavic Mini 2 Drone Anti-glare Lens Hood Gimbal Protective Shade Cover Feature: 1.Suitable for DJI Mavic MINI 2 drone lens hood, 2.Can effectively prevent parasitic light from entering the l more→ens and avoid reflection, 3.Quick installation and removal, Stable without loosening, 4.Light weight without adding weight to the drone. Description: Material: ABS Applicable models: for DJI Mavic MINI 2 Color: Black Net weight: 5.2g Package weight: 11.3g Product size: 5.6 * 3.6 * 3.4cm Package size: 5.7*5.7*4cm Packing list: 1pcs Lens Hood Note: 1.Does not include Drone, 2.Transition: 1cm=10mm=0.39inch, 3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind

Dji Mini 2 Landing Gear Skid Float Kit Expansion For Dji Mavic Mini Landin

8.83Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Description: 1. Special Design for DJI Mavic Mini and DJI Mini 2 perfectly. 2. Highly Stability, Eliminates Rocking, Allows Smoother Landings, and allows for a smooth landing on a variety of unstable more→surfaces. 3. Lightweight, portable, easy to carry and install, It can use your drone flying on the river and lakes, you can use it take off and land on the lake,no worry about your drone sinking. 4. Buoyant rods can be installed to allow the Mavic Mini to take off and land on the water,it can allow let you play in the water or sea. Notes: Don't go to have wave of water of place, otherwise there will be danger of turning over, to fly in calm water place. Package included:1x Landing Gear Float Kit

Drone Propeller Holder Blades Prop Mount Guard Strap for DJI Mini 3 Pro

6.49Buy!
£

Joom.com

Delivery: in United Kingdom

Report

EWB9286 Drone Propeller Stabilizer Fixed Holder Blades Prop Mount Guard Protector Strap Accessories for DJI Mini 3 Pro Feature: 1. Effectively fix the propellers to prevent damage to the propellers wh more→en the aircraft is put into the backpack; 2. Integrate the body wrapping chassis design, which fits the body, effectively protects and does not affect the installation of the original lens cover; 3. Soft TPU material paddle strap, will not scratch and squeeze the fuselage and slender blades; 4. One-step snap-fastening for quick disassembly, effective storage of propellers, and convenient operation. Specification: Name: For Mini 3 Pro Beam Paddle Base Applicable models: for Mini 3 Pro Main

Durable Lightweight Lens Hood Cover Universal Sunshade for DJI MAVIC PRO H

6.91Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Description: New upgrade, expand the opening, to ensure shading effect at the same time, and does not affect the shooting of the lens. Workmanship is more refined, better texture. easy installation. S more→olid and secure. Light weight, only 8g. 4 colors available. Specification: Suitable for:for DJI MAVIC PRO PLATINUM Color:Black, white, silver, gray Weight: 8g Package Included: 1 * Lens Hood Protection Cover Notes: Due to the difference between different monitors, the pictures may not reflect the actual color of the item. Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement. Please leaving a message before you give the bad feedback, if the products have some

E58 JY019 RC Quadcopter Spare Parts Front Back Left Right Motor Arm Drone

6.79Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Description: Item type: Drone accessories Color: Black Weight: 9 g Quantity: 1pc Usage: for Eachine E58 WiFi FPV RC Quadcopter Features: Safe, strong Long service life Package includes: 1 * moto more→r arm Note: As different computers display colors differently, the color of the actual item may vary slightly from the pictures. Hope you understand. We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.

F4 V3S FC Flight Controller Board 60A 4in1 Brushless ESC for Airplane RC F

97.94Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: F4 V3S FC Flight controller board and 60A 4in1 brushless ESC for RC FPV drone. Size: 36*36mm. Mounting Holes: 30.5*30.5mm. The function of the flight control is to control the drone through more→the gyroscope on the flight control board. Great choice for university professors and students who are interested in developing RC FPV drone. Specifications: Item Name: F4 V3S FC Flight Controller Board Size: 36*36mm Mounting Holes: 30.5*30.5mm STM32 F405 MCU Dshot Support Drag and Drop OSD configured via Betaflight Gyro: BMI270 SBUS / PPM AND Spketrum DSMX ports Memory card blackbox Baro (BMP280) BEC: 5V3A 9V3A On-board video filters (only 5V to VTX and camera) Item Name: 4 in 1 60A BLHeli_S ESC …

Fixed Stabilizers Protective Prop Blades Strap for Mavic Mini 3 Pro Drone

7.23Buy!
£

Joom.com

Delivery: in United Kingdom

Report

For DJI Mini 3 Pro 8pcs Propellers Drone Replacement Low-Noise Quick-Release Blades Props for Mini 3 Pro Drone Accessories Feature: Double-sided colorful stripes for Mini 3 Pro Small size, flexible an more→d strong, easy to fly Easy to install and easy to use Specification: Material: PC Applicable models: Suitable for DJI Mini 3 Pro Color: Orange Edge/Silver Edge Size: 6.0*3.0 inches (diameter x pitch 15.2*7.6cm) Note: Drones not included. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.

Flycolor RAPTOR SLIM 40A 2-4S Brushless ESC Dshot BLHeli-S for QAV 170-330

17.28Buy!
£

Joom.com

Delivery: in United Kingdom

Report

This is RAPTOR SLIM 40A ESC Electronic Speed Controller designed for RC FPV? Racing Quadcopter. With excellent quality and efficient performance, it can totally meet your need and bring you a lot of f more→lying fun, take it with you right now Features: Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is 500k eRPM BLHeli-S firmware is designed for superior performance in multirotors, and uses hardware generated motor?pwm for smooth throttle response and silent operation Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling Supports higher KV motor and more power load, more suitable for violent flight …

Flysky FGr4B Receiver Supporting AFHDS3 PL18 NB4 NB4 Lite Transmitter Outp

46.54Buy!
£

Joom.com

Delivery: in United Kingdom

Report

The FGr4B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).It uses a single-antenna bidirectional transmission system and is uniquely designed to install more→and output PWM/PPM/i-bus/S.BUS/i-bus2 in signals. It supports all AFHDS3 transmitter. Features: The FGr4B receiver is compatible with all AFHDS 3 transmitters? (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.). The failsafe function is used to output the channel according to the out-of-control protection value set by the user after the receiver loses its signal and is out of control …

FlySky FS-BS6 Receiver 2.4Ghz 6CH AFHDS2 for FlySky FS-GT5 FS-IT4S Transmi

28.32Buy!
£

Joom.com

Delivery: in United Kingdom

Report

2.4G FlySky FS-BS6 6 channel remote control receiver, compatible with FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat Features: Easy to bind and very fast link-up, quick and extreme more→ly stable in performance Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing 6 channel receiver is compatible with?FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat Buillt-in gyroscope Features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter Specifications: Item Name: FS-BS6 Brand Name: Flysky Channels: 6 Channels 2.4GHz System: AFHDS2A Model type: RC Car Boat Modulation type: GFSK RF Receiver Sensitivity: …

FlySky FS-CT6B Remote Controller Transmitter with FS-R6B Receiver 2.4G 6CH

52.34Buy!
£

Joom.com

Delivery: in United Kingdom

Report

2.4G FS-CT6B 6 CH Radio Model RC Transmitter & Receiver Heli/Airplane/Glid Features: Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. 8 mode more→l memory, digital control. Can be programmed by PC with the included software. Full range 2.4GHz 6-channel radio. 4-Model Memory. 4 Type (Airplane, Heli90, Heli120, Heli140). Integrated timer. Contrast Adjustment. Throttle cut. Computer Programmable. USB Socket. Use a linear spread of fine paragraph by exces antenna. It covers the entire band width of he antenna bandwidth range. High quality and stability. Specifications: Transmitter/Receiver: 2.4GHz Mode type: Airplane, Helicopter, Glider Stick …

Flysky FS-GT3C 2.4Ghz 3CH Remote Controller LCD Transmitter w/ FS-GR3E Rec

56.20Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Original Flysky FS-GT3C 2.4Ghz 3CH AFHDS Automatic Frequency Hopping Digital System Transmitter & FS-GR3E 2.4Ghz 3CH Receiver for RC Boat Car. Features: LCD screen display High receiving sensitivity more→3CH remote control for RC cars and boats Super active and passive anti-jamming capabilities Very low power consumption, and stable performance Adopts AFHDS (Automatic Frequency Hopping Digital System) Transmitter is powered by a rechargeable 3.7V li-ion battery It covers the entire band width of the antenna bandwidth range Works between 2.4GHz to 2.48GHz frequencies, divided into 160 wave bands Specifications: Brand: Flysky Model type: Car and boat Channels: 3CH RF range: 2.4-2.48GHz RF power: …

Flysky FS-RM005 Module for NB4/NB4 Pro Remote Controller

54.16Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: FS-RM005 is a module used with NB4/NB4 Pro. It adopts Mini-Z FHSS system and can be adapted to Mini-Z RWD, AWD, 4X4, FWD, ect. RF: 2.4G ISM, 2.4GHz Protocol: Mini-Z( FHSS). Input Power: 3.3 more→+/-0.1V, Antenna: Built-in Single Antenna. If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: Module Model Name: FS-RM005 Adaptive Transmitter: NB4,NB4 Pro RF: 2.4G ISM RF Power: less than 20dBm( EU) 2.4GHz Protocol: Mini-Z( FHSS) Input Power: 3.3+/-0.1V Antenna: Built-in Single Antenna Online Update: Yes Temperature Range:? -10 degrees C~+60 degrees C Humidity Limit: 20%-95% Size: 34*18*5.2mm( Without Protective Cover) …

FLYSKY FS-SR8 Receiver 2.4G Protocol ANT 3.5~9V/DC Receiver for FS-ST8 RC

25.81Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: Exquisite workmanship, manufactured and tested to highest standards. Receiver for FS-ST8 remote controller. Adaptive models: RC car, helicopters, gliders, engineering vehicles, robots. The p more→ackage includes a receiver. 8CH, RF 2.4GHz ISM, data output: PWM/PPM/i-BUS/S.BUS. Size: 44.8*26.6*11.3mm. Specification: Brand: FLYSKY Product Model: FS-SR8 Adaptive Transmitter: FS-ST8 (Adapts Transmitter with ANT Protocol ) Adaptive Models: Helicopters, Gliders, Delta-wing airplanes, Multicopters, Engineering Vehicles, Robots, Cars or Boats, etc. Numbers of Channel: 8 Maximum Power: less than 20dBm (e.i.r.p.) (EU) RF: 2.4GHz ISM 2.4GHz Protocol: ANT Distance: more than 1000m (Air Distance …

FlySky FTR10 2.4G 10CH AFHDS 3 RC Receiver Dual Antenna Support i-BUS/S-BU

59.73Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: FTr10 adopts AFHDS 3, Flysky"s third-generation automatic frequency hopping digital system. It has stable performance.? It uses a double-antenna bidirectional transmission system and is uniq more→uely to save space. Output standard PWM PPM i-BUS and S-bus signals. 2.4GHz?Wireless frequency,?Power: 3.5-12V. Suitable for model: Airplane, glider, helicopter, multi-axis aircraft, suitable for Flysky PL18 transmitter, easy install, and use. Specification: Brand: FlySky Product Model: FTr10 PWM channel: 10 Wireless frequency: 2.4GHz Wireless protocol: AFHDS 3 Range: more than 3500m (air) Antenna type: dual antenna (103mm * 2) Power: 3.5-12V RSSI: Supported Data port: PWM / PPM / i.bus / s.bus …

FS-GT3B 2.4G 3CH Radio Model Remote Control LCD Transmitter & Receiver for

46.34Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands. It covers the entire band width of the antenna bandwidth range. Adopts more→AFHDS (Automatic Frequency Hopping Digital System) High receiving sensitivity. Super active and passive anti-jamming capabilities. Very low power consumption, and stable performance. LCD screen display. Specifications: Packing list: 1 * Transmitter 1 * Receiver 1 * Antenna tube 1 * Code matching line

GA-4H-TX 4CH 2.4GHz Remote Controller Digital Radio Transmitter with Recei

11.79Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Features: 2.4G technology, FHSS 67 channels frequency-hopping spread spectrum, highly resistant to anti-jamming. Response time: 10s-12ms, ensuring a fast response and better control. Smooth and highly more→sensitive to control inputs and stable at distances from 200-300m. Compatible with a variety of vehicles, suitable for RC cars, RC boats and RC tanks. With brake and fail safe, out of control protection function. Specifications: Item: 2.4GHz Remote Controller Main Material: ABS Main Color: Black Channels: 4 Mode Type: RC Car Boat RF Power: Less than 20dbm Response Time: 10s-12ms Control Distance: About 200-300m Voltage Input: 4.8V-6Vor 1.5AAA*4 Low Voltage Warning: 4.5V Size: 180*80*145mm Item: Receiver C…

Gimbal Motor Cable For Dji Mavic Pro Black

22.43Buy!
£

Joom.com

Delivery: in United Kingdom

Report

Suitable For Dji Mavic Pro. SpecificationDimensions And Weight Product Weight 0.0100 Kg Package Weight 0.0200 Kg You Will Receive You Will Receive 1 X Gimbal Motor Cable Small Parts Disclaimer T more→hese Toys Contain Small Parts, Not For Children Under 3 Years In Case Of Swallowing Or Choking We Do Not Accept Any Responsibility Or Liability For Misuse Of This Or Any Other Product. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU/AU/NZ/US Product Safety and Compliance laws.

GoolRC 3650 3500KV Waterproof Brushless Motor for 1/10 RC Car HSP 94123 Hu

24.86Buy!
£

Joom.com

Delivery: in United Kingdom

Report

The original GoolRC high performance 3650 3500KV waterproof brushless motor is designed to provide both quality and performance at an affordable price. Waterproof function motor let your car challenge more→the muddy road. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for 1/10 RC car truck. Features: 4 pole 12 slot high-torque motor design 3.175mm shaft diameter High purity copper windings maximizes efficiency Precision engineered for maximum energy conversion Precision balanced rotor,smoothness for best reliability and maximum RPM Suit for 1/10 scale RC car Specifications: …

24 more item(s)