Parts for Drones & RC models

Features: Improve the simulation degree of the remote control car and make the remote control car more realistic. Aluminum alloy material, strong and durable. RC car fix block for 1/14 1/12 1/10 RC car. Good workmanship and good material. Specifications: Item Name: RC Car Wheel Chock Material: Aluminum Alloy Color: Red Note: * There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. Package Information: Package Size: 7.5*7*3cm Package Weight: 32g Plastic Package Package List: 2* RC Car Wheel Chock

The packages include 4pcs wheel rim, the wheel rim can give good support for the tire. Features: [Aluminum Alloy Material]: The wheel rim is made of aluminum alloy material, strong and durable, not easy to deform. [Support Tires]: Full strong wheels rims hub can give good support for the tire. [Suitable RC Car]: Replacement for 1/14 Tamiya RC car. [Easy to Install]: Easy to install the wheel rim, RC DIY enthusiast will like it very much. Specifications: Item Name: Wheel Rim Material: Aluminum Alloy Quantity: 4pcs Hexagon Length: 12mm(Side to Side Length) Note: * There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for …

Antenna for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Features: 100% brand new Perfect for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Made of high quality material To extend control distance to about 500m Easy to replace and install Specification: Product name: Antenna Gain: 5dBi Color: Black Material: Plastic Transmission distance: 300-500m Suitable: Flytec 2011-5 Fishing Bait Boat Package Information: Package size: 19.5 * 1.2 * 1.2cm / 7.7 * 0.5 * 0.5in Package weight: 14g / 0.5oz Poly bag package Package List: 1 * Antenna set

Features: AX-7S transmitter has high receiving sensitivity, super active and passive anti-jamming capabilities, very low power consumption, and stable performance. New 2 in 1 Receiver and ESC design, easy to assemble, and upgrade. Convenient to adjust the steering trim, the throttle trim, steering rate. Overheating protection, stop output when the temperature is higher than 90 degrees. Locked-rotor protection: when the motor is overloaded or jammed, 2-3s after the electrical output stops. Go into protective mode. Remote the protection status after the throttle control returns to the center. Suit For: 1/14 1/16 1/18 1/24 1/28 1/32 RC car RC boat. Specifications: Item name: RC Transmitter with …

This Police Car Light is special for RC car models, with strobing-blasting Flashing fast-slow Rotating Mode. Features: RC CH3 Controling Mode: Strobing-blasting Flashing Mode. Fast-slow Rotating Mode. Aluminum alloy base. color: blue /yellow /red Specification: Item Number: AX-511BL The use of voltage:4.8~6V Method of use: the power line is connected to the receiver third channel(CH3) Size: 9*15mm Weight: Approx.1g (0.035 oz) Package information: Package size: 13 * 3.8 * 1.5cm / 5.11 * 1.49 * 0.6in Package weight: 12g / 0.43 oz Package List: 1 * AX-511BL Police Car Light

This 60A brushed ESC with 5V/2A BEC is specially designed for 1/10 rc car and rc boat, which provides both quality and performance at an affordable price. With multiple protections makes a long service life. Features: Suit for 1/10 RC Car Off-road Truck and RC Boat. Compatible with brushed motor. The strong resistant current capability, excellent heat dissipation. Multiple protection Features: low voltage cut-off protection/over-heat protection/throttle signal loss protection. Easily programmed and compatible with pocket-sized program card. Specifications: Item name: Brushed ESC Material: Metal Continous current: 60A Burst current: 120A Back off current: 45A(60A MAX) Power supply: 2S …

Features: Betaflight F4 V3S PLUS FC flight controller board for RC FPV drone. Size: 36x36mm, Mounting Holes: 30.5x30.5mm. The function of the flight control is to control the drone through the gyroscope on the flight control board. Great choice for university professors and students who are interested in developing RC FPV drone. If there are any problems, please contact our store in time. Specifications: Item Name: F4 V3 PLUS Flight Controller Size: 36x36mm Mounting Holes: 30.5x30.5mm STM32 F405 MCU Dshot support Drag and Drop OSD configured via Betaflight Gyro: BMI270 SBUS / PPM AND Spketrum DSMX ports Memory card blackbox Baro (BMP280) BEC: 5v3a 9V3A Onboard video filters (only 5V to VTX

Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. User programmable. Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field. Timing can be changed to be suitable for different brushless motors. This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5-1.7kg/cm (4.8V-6V) torque. Pretty strong regarding its size. Full protection: low voltage cutoff protection / over-heat protection / throttle signal loss protection.…

Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. User programmable. Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field. Timing can be changed to be suitable for different brushless motors. This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5-1.7kg/cm (4.8V-6V) torque. Pretty strong regarding its size. Full protection: low voltage cutoff protection / over-heat protection / throttle signal loss protection.…

Features: △Compatible with: It is specially designed for DJI AIR 2S/Mavic Air 2 drone. △High quality material: high toughness ABS material, which can effectively buffer impact force, fine workmanship, wear-resistant and durable. △Effective protection: it is used to isolate the blade, reduce the risk of blade injury, and avoid foreign matters from hitting the blade to cause damage and improve flight safety. △Lightweight design: only weighs 74g, does not affect the normal flight of UAV, easy to carry. △Quick disassembly and assembly: snap design, quick disassembly and quick assembly, color matching of the fuselage has texture. Specifications: Item name: Propeller Guard Main material: ABS Color:…

The floating landing kit can make drones take off and land on the calm water. It can also effectively avoid the drone dirty or damaging the gimbal during the landing and taking off. It is compatible with DJI Mavic Air 2 Drone. Features: The buoyant landing gear protects your ?Mavic Air 2 Drone when it lands/takes off over the water and shoots video over the water to make your flight more fun. It also serves as landing gear and elevating the foot, reducing the impact of the aircraft on the ground during landing and providing good protection for the camera and head of the drone. Effectively increase by 60mm. Non-destructive installation design, easy to install, it can be disassembled. With a …

Features: These tires are specially designed for 1/14 Tamiya RC Tractor Truck. Made of fine aluminum alloy and rubber, durable and sturdy to use for a long service time. Also, easy to install and disassemble, and you can get the perfect performance on the model car. Fine workmanship and perfect style, help to improve your car appearance. Specification: Item Name: Front & Rear Tires Set Color: Black and silvery Material: Aluminium Alloy, Rubber Tyre Diameter: 85mm Tyre Width: 45mm (Rear); 20mm(Front) Wheel Rim Drive Hex: 12mm Weight: 148g/1pcs (Rear);83g/1pcs (Front) Package Size: 17 x 14 x 9.5cm Package Weight: 805g Note: There could be a few deviations due to manual measurement. Thank you …

Specification: Inside diameter: 2mm tight Paddle diameter: 36mm/42mm/28mm Material: nylon, non-professional paddle Adaptation: 2mm shaft, 2mm motor Quantity: 5pairs Color: White Package included: 5Pais x propellers

Features: F4 V3S FC Flight controller board and 60A 4in1 brushless ESC for RC FPV drone. Size: 36*36mm. Mounting Holes: 30.5*30.5mm. The function of the flight control is to control the drone through the gyroscope on the flight control board. Great choice for university professors and students who are interested in developing RC FPV drone. Specifications: Item Name: F4 V3S FC Flight Controller Board Size: 36*36mm Mounting Holes: 30.5*30.5mm STM32 F405 MCU Dshot Support Drag and Drop OSD configured via Betaflight Gyro: BMI270 SBUS / PPM AND Spketrum DSMX ports Memory card blackbox Baro (BMP280) BEC: 5V3A 9V3A On-board video filters (only 5V to VTX and camera) Item Name: 4 in 1 60A BLHeli_S ESC …

For DJI Mini 3 Pro 8pcs Propellers Drone Replacement Low-Noise Quick-Release Blades Props for Mini 3 Pro Drone Accessories Feature: Double-sided colorful stripes for Mini 3 Pro Small size, flexible and strong, easy to fly Easy to install and easy to use Specification: Material: PC Applicable models: Suitable for DJI Mini 3 Pro Color: Orange Edge/Silver Edge Size: 6.0*3.0 inches (diameter x pitch 15.2*7.6cm) Note: Drones not included. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.

This is RAPTOR SLIM 40A ESC Electronic Speed Controller designed for RC FPV? Racing Quadcopter. With excellent quality and efficient performance, it can totally meet your need and bring you a lot of flying fun, take it with you right now Features: Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is 500k eRPM BLHeli-S firmware is designed for superior performance in multirotors, and uses hardware generated motor?pwm for smooth throttle response and silent operation Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling Supports higher KV motor and more power load, more suitable for violent flight …

The FGr4B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus/S.BUS/i-bus2 in signals. It supports all AFHDS3 transmitter. Features: The FGr4B receiver is compatible with all AFHDS 3 transmitters? (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.). The failsafe function is used to output the channel according to the out-of-control protection value set by the user after the receiver loses its signal and is out of control …

2.4G FlySky FS-BS6 6 channel remote control receiver, compatible with FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat Features: Easy to bind and very fast link-up, quick and extremely stable in performance Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing 6 channel receiver is compatible with?FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat Buillt-in gyroscope Features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter Specifications: Item Name: FS-BS6 Brand Name: Flysky Channels: 6 Channels 2.4GHz System: AFHDS2A Model type: RC Car Boat Modulation type: GFSK RF Receiver Sensitivity: …

2.4G FS-CT6B 6 CH Radio Model RC Transmitter & Receiver Heli/Airplane/Glid Features: Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. 8 model memory, digital control. Can be programmed by PC with the included software. Full range 2.4GHz 6-channel radio. 4-Model Memory. 4 Type (Airplane, Heli90, Heli120, Heli140). Integrated timer. Contrast Adjustment. Throttle cut. Computer Programmable. USB Socket. Use a linear spread of fine paragraph by exces antenna. It covers the entire band width of he antenna bandwidth range. High quality and stability. Specifications: Transmitter/Receiver: 2.4GHz Mode type: Airplane, Helicopter, Glider Stick …

Original Flysky FS-GT3C 2.4Ghz 3CH AFHDS Automatic Frequency Hopping Digital System Transmitter & FS-GR3E 2.4Ghz 3CH Receiver for RC Boat Car. Features: LCD screen display High receiving sensitivity 3CH remote control for RC cars and boats Super active and passive anti-jamming capabilities Very low power consumption, and stable performance Adopts AFHDS (Automatic Frequency Hopping Digital System) Transmitter is powered by a rechargeable 3.7V li-ion battery It covers the entire band width of the antenna bandwidth range Works between 2.4GHz to 2.48GHz frequencies, divided into 160 wave bands Specifications: Brand: Flysky Model type: Car and boat Channels: 3CH RF range: 2.4-2.48GHz RF power: …

Features: FS-RM005 is a module used with NB4/NB4 Pro. It adopts Mini-Z FHSS system and can be adapted to Mini-Z RWD, AWD, 4X4, FWD, ect. RF: 2.4G ISM, 2.4GHz Protocol: Mini-Z( FHSS). Input Power: 3.3+/-0.1V, Antenna: Built-in Single Antenna. If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: Module Model Name: FS-RM005 Adaptive Transmitter: NB4,NB4 Pro RF: 2.4G ISM RF Power: less than 20dBm( EU) 2.4GHz Protocol: Mini-Z( FHSS) Input Power: 3.3+/-0.1V Antenna: Built-in Single Antenna Online Update: Yes Temperature Range:? -10 degrees C~+60 degrees C Humidity Limit: 20%-95% Size: 34*18*5.2mm( Without Protective Cover) …

Features: Exquisite workmanship, manufactured and tested to highest standards. Receiver for FS-ST8 remote controller. Adaptive models: RC car, helicopters, gliders, engineering vehicles, robots. The package includes a receiver. 8CH, RF 2.4GHz ISM, data output: PWM/PPM/i-BUS/S.BUS. Size: 44.8*26.6*11.3mm. Specification: Brand: FLYSKY Product Model: FS-SR8 Adaptive Transmitter: FS-ST8 (Adapts Transmitter with ANT Protocol ) Adaptive Models: Helicopters, Gliders, Delta-wing airplanes, Multicopters, Engineering Vehicles, Robots, Cars or Boats, etc. Numbers of Channel: 8 Maximum Power: less than 20dBm (e.i.r.p.) (EU) RF: 2.4GHz ISM 2.4GHz Protocol: ANT Distance: more than 1000m (Air Distance …

Features: FTr10 adopts AFHDS 3, Flysky"s third-generation automatic frequency hopping digital system. It has stable performance.? It uses a double-antenna bidirectional transmission system and is uniquely to save space. Output standard PWM PPM i-BUS and S-bus signals. 2.4GHz?Wireless frequency,?Power: 3.5-12V. Suitable for model: Airplane, glider, helicopter, multi-axis aircraft, suitable for Flysky PL18 transmitter, easy install, and use. Specification: Brand: FlySky Product Model: FTr10 PWM channel: 10 Wireless frequency: 2.4GHz Wireless protocol: AFHDS 3 Range: more than 3500m (air) Antenna type: dual antenna (103mm * 2) Power: 3.5-12V RSSI: Supported Data port: PWM / PPM / i.bus / s.bus …

Features: 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands. It covers the entire band width of the antenna bandwidth range. Adopts AFHDS (Automatic Frequency Hopping Digital System) High receiving sensitivity. Super active and passive anti-jamming capabilities. Very low power consumption, and stable performance. LCD screen display. Specifications: Packing list: 1 * Transmitter 1 * Receiver 1 * Antenna tube 1 * Code matching line