Bits & Sockets Sets

Dustproof clamping collet for Festool OF 1400, OF 2000 and OF 2200 routers. Requires a 24mm spanner for tightening. Specifications • Size: 1/4" / 6.35mm

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 10mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 12mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 1/2" shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 6mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 8mm shank router cutters.

• Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.• Designed to rotate cranksh more→aft on Mercedes commercial vehicles via flywheel ring gear. • Model No. CV038Technical Specification:Application(s): Mercedes; OM457, OM541, OM542, OM902, OM904, OM906, OM924, OM926, MAN; D25, D28Drive: 1/2"SqNett Weight: 0.41kgDimensions: Length: 95mm x Height: 80mmWeight: 0.84KgWarranty: 1 year

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneere more→d). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 30 • Overall Length Metric: 57.5 • Type or Grade: RH

Self guided tools for trimming inlay or overlaps. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.6 • Dia Imperial: 1 1/8 • Cut Length Metric: 38.1 • Cut Length Imperi more→al: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 28.6

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Lengt more→h Metric: 15 • Overall Length Metric: 66 • Angle: 45

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 70.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 10

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.5 • Angle: 10

Drilling Through Reinforced Concrete Is A Difficult Task That Demands A Lot From Hammer Drills. Even 4-Cutters Wear Out Quickly. Downtime Occurs When Changing Accessories And Buying Consumables. The S more→olid Carbide Head On The Expert Sds Max-8x Is An Advanced 4-Cutter Made From A Single Piece Of The Hardest Metal: It Does Not Jam And Shows No Weakness When Hammer Drilling.For Construction Professionals Who Regularly Drill Concrete And Reinforced Concrete, E.G. For Heavy Anchors Or Reinforcement Extensions. The Bosch Expert Sds Max-8x Hammer Drill Bit Offers Unparalleled Performance, Reliability And Durability. It Is The Ideal Expert Accessory For Sds Max Hammer Drills.Features:- For Hammer Drills- …