Bits & Sockets Sets

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 12mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 1/2" shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 6mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 8mm shank router cutters.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Molybdenum, drop-forged, WallDrive® impact socket.• Hardened and tempered for added strength, with a more→phosphate finish for greater corrosion resistance.• Ideal for use with air impact wrenches.• Lifetime guarantee*.Chrome Molybdenum, drop-forged, WallDrive® impact socket. Hardened and tempered for added strength, with phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches.• Chrome Molybdenum, drop-forged, WallDrive® impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches. • Lifetime guarantee*. • Model No. IS165Tec…

• Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.• Designed to rotate cranksh more→aft on Mercedes commercial vehicles via flywheel ring gear. • Model No. CV038Technical Specification:Application(s): Mercedes; OM457, OM541, OM542, OM902, OM904, OM906, OM924, OM926, MAN; D25, D28Drive: 1/2"SqNett Weight: 0.41kgDimensions: Length: 95mm x Height: 80mmWeight: 0.84KgWarranty: 1 year

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 70.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 10

Self guided tools for trimming inlay or overlaps. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.6 • Dia Imperial: 1 1/8 • Cut Length Metric: 38.1 • Cut Length Imperi more→al: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 28.6

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Lengt more→h Metric: 15 • Overall Length Metric: 66 • Angle: 45

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.5 • Angle: 10

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneere more→d). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 30 • Overall Length Metric: 57.5 • Type or Grade: RH

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• more→Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS048Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.100kgSize: 15mmDimensions: Length: 35mm x Height: 50mmWeight: 0.104KgWarranty: Life

The step drill bit is made of HSS (high-speed steel) and coated with AlTiN (Aluminium Titan Nitride). It thus offers the maximum lifetime possible and does not require the use of a coolant. Easily vis more→ible and durable markings of the hole diameter are provided by laser-marked figures in both spiral flutes. In addition, the 3-flat shank prevents slipping in the chuck and also provides powerful high-torque transmission. The HSS Step Drill Bit performs smooth, burr-free drilling in several diameters with one drill bit. It is ideal for deburring, for drilling round holes and for enlarging existing ones. Pre-punching is not necessary, because the split-point tip allows for an easy start. Its CNC ground …

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish.• Deep knurling on sh more→afts allows extra grip when spinning off fixings.• Spring-ball socket retainers.• Sizes: 50, 125, 250, 375, 500mm.• Lifetime guarantee*.Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allows extra grip when spinning off fixings. Spring-ball socket retainers.• Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. • Deep knurling on shafts allows extra grip when spinning off fixings. • Spring-ball socket…