Parts for Drones & RC models

Antenna for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Features: 100% brand new Perfect for Flytec 2011-5 1.5kg Loading Remote Control Fishing Bait Boat Made of high quality material To extend control distance to about 500m Easy to replace and install Specification: Product name: Antenna Gain: 5dBi Color: Black Material: Plastic Transmission distance: 300-500m Suitable: Flytec 2011-5 Fishing Bait Boat Package Information: Package size: 19.5 * 1.2 * 1.2cm / 7.7 * 0.5 * 0.5in Package weight: 14g / 0.5oz Poly bag package Package List: 1 * Antenna set

Features: AX-7S transmitter has high receiving sensitivity, super active and passive anti-jamming capabilities, very low power consumption, and stable performance. New 2 in 1 Receiver and ESC design, easy to assemble, and upgrade. Convenient to adjust the steering trim, the throttle trim, steering rate. Overheating protection, stop output when the temperature is higher than 90 degrees. Locked-rotor protection: when the motor is overloaded or jammed, 2-3s after the electrical output stops. Go into protective mode. Remote the protection status after the throttle control returns to the center. Suit For: 1/14 1/16 1/18 1/24 1/28 1/32 RC car RC boat. Specifications: Item name: RC Transmitter with …

This Police Car Light is special for RC car models, with strobing-blasting Flashing fast-slow Rotating Mode. Features: RC CH3 Controling Mode: Strobing-blasting Flashing Mode. Fast-slow Rotating Mode. Aluminum alloy base. color: blue /yellow /red Specification: Item Number: AX-511BL The use of voltage:4.8~6V Method of use: the power line is connected to the receiver third channel(CH3) Size: 9*15mm Weight: Approx.1g (0.035 oz) Package information: Package size: 13 * 3.8 * 1.5cm / 5.11 * 1.49 * 0.6in Package weight: 12g / 0.43 oz Package List: 1 * AX-511BL Police Car Light

This 60A brushed ESC with 5V/2A BEC is specially designed for 1/10 rc car and rc boat, which provides both quality and performance at an affordable price. With multiple protections makes a long service life. Features: Suit for 1/10 RC Car Off-road Truck and RC Boat. Compatible with brushed motor. The strong resistant current capability, excellent heat dissipation. Multiple protection Features: low voltage cut-off protection/over-heat protection/throttle signal loss protection. Easily programmed and compatible with pocket-sized program card. Specifications: Item name: Brushed ESC Material: Metal Continous current: 60A Burst current: 120A Back off current: 45A(60A MAX) Power supply: 2S …

Features: Betaflight F4 V3S PLUS FC flight controller board for RC FPV drone. Size: 36x36mm, Mounting Holes: 30.5x30.5mm. The function of the flight control is to control the drone through the gyroscope on the flight control board. Great choice for university professors and students who are interested in developing RC FPV drone. If there are any problems, please contact our store in time. Specifications: Item Name: F4 V3 PLUS Flight Controller Size: 36x36mm Mounting Holes: 30.5x30.5mm STM32 F405 MCU Dshot support Drag and Drop OSD configured via Betaflight Gyro: BMI270 SBUS / PPM AND Spketrum DSMX ports Memory card blackbox Baro (BMP280) BEC: 5v3a 9V3A Onboard video filters (only 5V to VTX

Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. User programmable. Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field. Timing can be changed to be suitable for different brushless motors. This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5-1.7kg/cm (4.8V-6V) torque. Pretty strong regarding its size. Full protection: low voltage cutoff protection / over-heat protection / throttle signal loss protection.…

Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. User programmable. Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field. Timing can be changed to be suitable for different brushless motors. This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5-1.7kg/cm (4.8V-6V) torque. Pretty strong regarding its size. Full protection: low voltage cutoff protection / over-heat protection / throttle signal loss protection.…

Features: △Compatible with: It is specially designed for DJI AIR 2S/Mavic Air 2 drone. △High quality material: high toughness ABS material, which can effectively buffer impact force, fine workmanship, wear-resistant and durable. △Effective protection: it is used to isolate the blade, reduce the risk of blade injury, and avoid foreign matters from hitting the blade to cause damage and improve flight safety. △Lightweight design: only weighs 74g, does not affect the normal flight of UAV, easy to carry. △Quick disassembly and assembly: snap design, quick disassembly and quick assembly, color matching of the fuselage has texture. Specifications: Item name: Propeller Guard Main material: ABS Color:…

The floating landing kit can make drones take off and land on the calm water. It can also effectively avoid the drone dirty or damaging the gimbal during the landing and taking off. It is compatible with DJI Mavic Air 2 Drone. Features: The buoyant landing gear protects your ?Mavic Air 2 Drone when it lands/takes off over the water and shoots video over the water to make your flight more fun. It also serves as landing gear and elevating the foot, reducing the impact of the aircraft on the ground during landing and providing good protection for the camera and head of the drone. Effectively increase by 60mm. Non-destructive installation design, easy to install, it can be disassembled. With a …

Specification: Inside diameter: 2mm tight Paddle diameter: 36mm/42mm/28mm Material: nylon, non-professional paddle Adaptation: 2mm shaft, 2mm motor Quantity: 5pairs Color: White Package included: 5Pais x propellers

For DJI Mini 3 Pro 8pcs Propellers Drone Replacement Low-Noise Quick-Release Blades Props for Mini 3 Pro Drone Accessories Feature: Double-sided colorful stripes for Mini 3 Pro Small size, flexible and strong, easy to fly Easy to install and easy to use Specification: Material: PC Applicable models: Suitable for DJI Mini 3 Pro Color: Orange Edge/Silver Edge Size: 6.0*3.0 inches (diameter x pitch 15.2*7.6cm) Note: Drones not included. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.

This is RAPTOR SLIM 40A ESC Electronic Speed Controller designed for RC FPV? Racing Quadcopter. With excellent quality and efficient performance, it can totally meet your need and bring you a lot of flying fun, take it with you right now Features: Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is 500k eRPM BLHeli-S firmware is designed for superior performance in multirotors, and uses hardware generated motor?pwm for smooth throttle response and silent operation Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling Supports higher KV motor and more power load, more suitable for violent flight …

The FGr4B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus/S.BUS/i-bus2 in signals. It supports all AFHDS3 transmitter. Features: The FGr4B receiver is compatible with all AFHDS 3 transmitters? (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.). The failsafe function is used to output the channel according to the out-of-control protection value set by the user after the receiver loses its signal and is out of control …

2.4G FlySky FS-BS6 6 channel remote control receiver, compatible with FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat Features: Easy to bind and very fast link-up, quick and extremely stable in performance Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing 6 channel receiver is compatible with?FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat Buillt-in gyroscope Features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter Specifications: Item Name: FS-BS6 Brand Name: Flysky Channels: 6 Channels 2.4GHz System: AFHDS2A Model type: RC Car Boat Modulation type: GFSK RF Receiver Sensitivity: …

Features: Exquisite workmanship, manufactured and tested to highest standards. Receiver for FS-ST8 remote controller. Adaptive models: RC car, helicopters, gliders, engineering vehicles, robots. The package includes a receiver. 8CH, RF 2.4GHz ISM, data output: PWM/PPM/i-BUS/S.BUS. Size: 44.8*26.6*11.3mm. Specification: Brand: FLYSKY Product Model: FS-SR8 Adaptive Transmitter: FS-ST8 (Adapts Transmitter with ANT Protocol ) Adaptive Models: Helicopters, Gliders, Delta-wing airplanes, Multicopters, Engineering Vehicles, Robots, Cars or Boats, etc. Numbers of Channel: 8 Maximum Power: less than 20dBm (e.i.r.p.) (EU) RF: 2.4GHz ISM 2.4GHz Protocol: ANT Distance: more than 1000m (Air Distance …

Features: 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands. It covers the entire band width of the antenna bandwidth range. Adopts AFHDS (Automatic Frequency Hopping Digital System) High receiving sensitivity. Super active and passive anti-jamming capabilities. Very low power consumption, and stable performance. LCD screen display. Specifications: Packing list: 1 * Transmitter 1 * Receiver 1 * Antenna tube 1 * Code matching line

Suitable For Dji Mavic Pro. SpecificationDimensions And Weight Product Weight 0.0100 Kg Package Weight 0.0200 Kg You Will Receive You Will Receive 1 X Gimbal Motor Cable Small Parts Disclaimer These Toys Contain Small Parts, Not For Children Under 3 Years In Case Of Swallowing Or Choking We Do Not Accept Any Responsibility Or Liability For Misuse Of This Or Any Other Product. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU/AU/NZ/US Product Safety and Compliance laws.

The original GoolRC high performance 3650 3500KV waterproof brushless motor is designed to provide both quality and performance at an affordable price. Waterproof function motor let your car challenge the muddy road. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for 1/10 RC car truck. Features: 4 pole 12 slot high-torque motor design 3.175mm shaft diameter High purity copper windings maximizes efficiency Precision engineered for maximum energy conversion Precision balanced rotor,smoothness for best reliability and maximum RPM Suit for 1/10 scale RC car Specifications: …

The original GoolRC high performance 3650 4300KV waterproof brushless motor is designed to provide both quality and performance at an affordable price. Waterproof function motor let your car challenge the muddy road. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for 1/10 RC car truck. Features: 4 pole 12 slot high-torque motor design 3.175mm shaft diameter High purity copper windings maximizes efficiency Precision engineered for maximum energy conversion Precision balanced rotor,smoothness for best reliability and maximum RPM Suit for 1/10 scale RC car Specifications: …

The GoolRC S2440 4000KV sensorless brushless motor is designed to provide both quality and performance at an affordable price. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time. Features: High-torque and high-efficiency. Removable/Replaceable rotor. High RPM ABEC5 oversized bearings. High purity copper windings maximizes efficiency. Precision engineered for maximum energy conversion. Precision balanced rotor, smoothness for best reliability and maximum RPM. Low heat production, long lifetime, strong overload protection. Universal fit, fits all 1/16, 1/18 brushless …

The original GoolRC S-35A Brushless ESC is built with the highest quality components to ensure true-to-rating current handling and high efficiency operation. It Features enhanced throttle response,excellent acceleration, strong breaks and throttle linearity, which is suit for 1/12 1/14 1/16 Car. Features: Compatible with sensorless brushless motors. High anti-interference capability. Super smooth and accurate throttle linearity. Fast response to throttle input. Mutiple protection Features: Low voltage cut-off protection for lithium or nickel battery, Over-heat protection, Throttle signal loss protection, Motor blocked protection. Specifications: Brand name: GoolRC Item No.: S-35A Constant …

The GoolRC S3650 4300KV sensorless brushless motor is designed to provide both quality and performance at an affordable price. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time. Features: Efficient and high-speed ball bearings. High purity copper windings maximizes efficiency. Short stator, less wire, lower resistance, more power. CNC machined 6061 T6 billet aluminum heatsink can. Delivers more power than comparable brushed motors. Consistent and high-power output provide longer run time. Ultra high-temperature sintered neodymium magnets provide massive torque and …

The original upgrade waterproof 3650 4300KV brushless motor with 60A ESC combo is designed to provide both quality and performance at an affordable price. Waterproof function motor and ESC let your car challenge the muddy road. Providing much convenience for your 1/10 RC car truck. Features: 4 pole 12 slot high-torque motor design 3.175mm shaft diameter High purity copper windings maximizes efficiency Precision engineered for maximum energy conversion Precision balanced rotor,smoothness for best reliability and maximum RPM Mutiple protection Features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection Bulit-in 5.5V/3A BEC Suit for 1/10 scale RC car Motor …

The original upgrade waterproof F540 4370KV brushless motor with 45A ESC combo is designed to provide both quality and performance at an affordable price. Waterproof function motor and ESC let your car challenge the muddy road.Providing much convenience for your 1/10 RC car truck. PS:Click the link to watch the product video:?https://www.youtube.com/embed/PZ3c92A6isM Features: 4 pole 12 slot high-torque motor design High purity copper windings maximizes efficiency Precision engineered for maximum energy conversion Precision balanced rotor,smoothness for best reliability and maximum RPM Mutiple protection Features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection …