Computer Cases

With eight years of experience behind them Streacom has developed a new vertical, small form factor case that has been explicitly designed to showcase high-end hardware. The Streacom DA6 takes this plan and presents it with a tubular aesthetic, incredible versatility, and future-proof features. Standing at 431mm tall, this case has a footprint of 215mm by 215mm with an interior that has been optimised for hardware placement. Thanks to its open design, this case has phenomenal airflow and cooling capabilities, which can be further bolstered with support for both fans and radiators. There are many configurations you can take advantage of with the Streacom DA6, how you build it is up to you. …

With eight years of experience behind them Streacom has developed a new vertical, small form factor case that has been explicitly designed to showcase high-end hardware. The Streacom DA6 takes this plan and presents it with a tubular aesthetic, incredible versatility, and future-proof features. Standing at 431mm tall, this case has a footprint of 215mm by 215mm with an interior that has been optimised for hardware placement. Thanks to its open design, this case has phenomenal airflow and cooling capabilities, which can be further bolstered with support for both fans and radiators. There are many configurations you can take advantage of with the Streacom DA6, how you build it is up to you. …

LC-Power LC-808B-ON computer case Midi Tower Black

The MARS GAMING MC-3T Tower Case in Red is a sleek and stylish computer case designed for gamers and enthusiasts. This tower case features a striking red exterior with a futuristic design that is sure to stand out on any desk or gaming setup.The MC-3T Tower Case is compatible with ATX, Micro ATX, and Mini-ITX motherboards, providing flexibility for various build configurations. The case also offers ample room for high-performance components, including multiple hard drives, SSDs, and graphics cards.The front panel of the case features a mesh design for enhanced airflow, while the tempered glass side panel allows users to showcase their components and RGB lighting. The case also comes with pre-installed …

HIGH-PERFORMANCE AIRFLOW: Perforated front and top panels direct filtered air through the case to cool down components and enhance performance.
DEDICATED GPU FAN: An angled 120mm fan draws air from below the case to provide direct cooling for your power-hungry graphics card.
SPACIOUS COOLING SUPPORT: Up to 280mm radiator support in the front, 240mm up top, and 120mm in the rear. Comes with two pre-installed 120mm fans.
READY FOR PERFORMANCE: Fits most AMD Radeon Series graphics cards with its 365mm max GPU clearance. Display your GPU vertically using the NZXT Vertical GPU Mounting Kit (sold separately).
EASILY MANAGE CABLES: Wide cable channels with hooks, bridges, and straps take the guesswork …

Codegen 4U V2 600mm rackmount is a computer chassis featuring a number of different power form factor and storage device options. The 4U V2 rackmount computer chassis provides the best support for various rackmount systems and different applications. There are several fan options which can deliver an exceptional thermal performance you can rely on. Included is 2 x 120mm fans at the front and 2 x 80mm fans at the back. The front door with key lock delivers confident protection against unauthorised access and theft, for a great peace of mind. A spacious interior provides sufficient room to accommodate your powerful hardware, such as ATX motherboards and up to 8 internal 3.5" HDDs, 3 x 5.25" ODDs …

Upgrade your gaming PC with a secondary screen using the Phanteks 5.5" Hi-Res display. This boasts a 2560 x 1440 IPS panel with a 60Hz refresh rate. What’s more, this display will be visible even when positioned next to your RGB hardware, thanks to the 450 nit brightness. As this is essentially a second display output for your PC, this screen can be used to showcase anything your normal monitor could but is ideally suited for showing system information or animations to complement your computer’s aesthetic. Additionally, the 5.5" Hi-Res display can be placed almost anywhere, as it features multiple mounting options. Furthermore, with an included HDMI and SATA cable, the Phanteks 5.5" Hi-Res disp…

Cooling system: Internal: 80 mm fan x 2
Form factor: rack - can be installed - 2U
Supported motherboards: ATX, microATX, Mini-ITX
System housing features: made of steel
Specification compliance: EPS2U

The MC-3T is more than a computer case, It is a revolution in design and functionality. With its stunning panoramic view through three tempered glass panels, this case transforms every setup into a display of technological art. Its advanced cooling system, along with the ability to mount the GPU vertically, ensures superior performance and stunning aesthetics. With streamlined internal organization and efficient cable management, the MC-3T, available in five exclusive colors, is the ideal choice for those looking to combine excellence and performance with a distinctive, personalized style.Features:Unmatched Visual Show:- Relive your gaming experience with the MC-3T case! Discover an incomparable …

Design Art at its best by RAIJINTEK – a new series of SFF chassis, the METIS EVO case is designed to be the smallest case possible built with ultra-high air flow in mind and solve the thermal issues of a SFF chassis. METIS EVO supports up to Mini-ITX motherboards and is able to support an ultra-high air flow 200mm at front - you could also install a 120/140/200mm radiator at the front too, a 120 + 92mm fan at the bottom, and 2 x 92mm at the rear. METIS EVO's features includes elegant sand blasting on aluminum, 3.5” x 2 HDD + 2.5” x 2 HDD/SSD support, VGA card support up to 280mm in length (without radiator - up to 220mm with 30mm thickness radiator installed), is tool-free …

Design Art at its best by RAIJINTEK – a new series of SFF chassis, the METIS EVO case is designed to be the smallest case possible built with ultra-high air flow in mind and solve the thermal issues of a SFF chassis. METIS EVO supports up to Mini-ITX motherboards and is able to support an ultra-high air flow 200mm at front - you could also install a 120/140/200mm radiator at the front too, a 120 + 92mm fan at the bottom, and 2 x 92mm at the rear. METIS EVO's features includes elegant sand blasting on aluminum, 3.5” x 2 HDD + 2.5” x 2 HDD/SSD support, VGA card support up to 280mm in length (without radiator - up to 220mm with 30mm thickness radiator installed), is tool-free …