Car Service Station Equipment

Expert Quality, swivel head design with 14mm hexagonal shaft allowing socket or spanner use for additional torque. 06B heavy duty duplex chain for safety and security with double locking system. Display packed.

Expert Quality, set of three 6 point Draper Expert HI-TORQ° sockets sizes 17, 19 and 21mm. Manufactured from chrome molybdenum. Fitted with internal and external nylon sleeve preventing damage to wheels and nuts when in use. Supplied in handy case.

Robust hydraulic 15 tonne bench press with hand pump for manual hydraulic operation. There are eight adjustable table heights with a working range between 45-385mm. Robot welding one-piece frame for increased stability. There are dustproof covers fitted to the top of the frame to prevent dust entering the pump and ram, which helps to increase their service life. There is a removable parts tray located in the frame base. Supplied with eight press pins ranging from 2-15 tonnes and two flat v-shaped pressing blocks.

Robust hydraulic 30 tonne floor press with sliding ram for precise pressing. Fitted with hand pump for manual hydraulic operation. There are 12 adjustable table heights with a working range between 25-850mm. The table can be lifted or lowered using a winch. Robot welding one-piece frame for increased stability. There are dustproof covers fitted to the top of the frame to prevent dust entering the pump and ram, which helps to increase their service life. There is a removable parts tray located in the frame base. Supplied with eight press pins ranging from 2-15 tonnes and two flat v-shaped pressing blocks.

Expert Quality, for splitting chains from No.25 cam chains through to No.520 motorcycle final drive chains. Please note, to successfully press the rivet from heavy duty 520 drive chains, the rivet head must be ground off first. Display packed in blow mould storage case.

Expert Quality, for the removal of hollow wheel spindles. Hexagon sizes on tool: 17, 19, 22, 24mm with internal 3/8" square drive in the 19mm hex end. Display packed.

Spring loaded pliers for gripping hose clamps. Perfect when removing or replacing radiator pipes on cars and commercial vehicles. The notched jaws clasp on two sides. Designed for standard hose clamps and VAG Group fuel line/ventilation pipe clamps. Manufactured from hardened steel with soft grip handles. Display packed.

Expert Quality, 1/8" BSPT thread automatic grease feeder used for applying the optimum amount of grease at a constant discharge of 1-2 PSI. The transparent polycarbonate body offers easy refilling, which is achieved by using a standard grease gun. Suitable for use with NLGI 0 to NLGI 4 specification grease, within an operating temperature range of -23 deg C to 121 deg C (-10 to +250 deg F). For use on stationary, non vibrating machinery where no shock loads would be expected. Able to be mounted in any position, including horizontal, vertical or upside down ensuring constant lubrication. Supplied with three springs for adjusting the feed rate, ideal for different viscosities and operating temperatures: …

Expert Quality, 1/8" BSPT thread automatic grease feeder used for applying the optimum amount of grease at a constant discharge of 1-2 PSI. The transparent polycarbonate body offers easy refilling, which is achieved by using a standard grease gun. Suitable for use with NLGI 0 to NLGI 4 specification grease, within an operating temperature range of -23 deg C to 121 deg C (-10 to +250 deg F). For use on stationary, non vibrating machinery where no shock loads would be expected. Able to be mounted in any position, including horizontal, vertical or upside down ensuring constant lubrication. Supplied with three springs for adjusting the feed rate, ideal for different viscosities and operating temperatures: …

Expert Quality, with diecast head and port for air bleeder/bulk loader for single handed operation. Supplied with coupler and 230mm high pressure hose to DIN1283. Suitable for 400g cartridge or bulk fill. Safe working pressure 40MPa (5800 psi). Display carton.

Expert Quality, carbon steel with hardened and tempered jaws. Continuous crimping at preset tension ensures accurate crimp. Chemically blacked finish with PVC grips. Suitable for crimping insulated terminals as follows: - red channel: 0.5 - 1.00mm, blue channel: 1.5 - 2.5mm and yellow channel: 4.0 - 6.0mm. Supplied with 590 (approx.) mixed pre - insulated terminals in a steel storage case with insert. Display packed.

Expert Quality, remote access refill kit for automatic grease feeders. Provides users with the ability to easily refill automatic grease feeders, which would otherwise be difficult or unsafe to access directly. Display packed.

Expert Quality, for winding back calipers on Renault Modus vehicles. Manufactured from carbon steel and used with 3/8" Sq. Dr. Display packed.

Expert Quality, selection of aluminium oil filter sockets, suitable for most vehicle manufacturers. Display packed

Expert Quality, one person hand-operated kit that allows fluid to be drawn from the bleed nipple allowing either bleeding or full replacement of system on cars, vans, trucks and motor bikes. Magnetic bases on refilling bottles. Does not require brake reservoir caps. Supplied with reservoir top-up kit. Display carton.

Expert Quality, the unique stepped cap fits the brake-fluid reservoirs on most cars and light commercial vehicles. Supplied with quick connector and used in conjunction with Pneumatic Brake Bleeder Stock No. 28833. Display packed.

This capless tester uses the universal cone adaptor system to seal and pressurise the cooling system. Adaptors may be used to replace both screw and bayonet type cap fittings. The hand operated pressure pump has an integral gauge, adaptor quick connector and pressure release push pin. There are four universal cone adaptors to fit a wide range of vehicles. Supplied inside a sturdy blow moulded plastic case.

• Designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and intended for trade use • A capless tester, it uses a cone adaptor system to seal and pressurise the cooling system • Cone adaptors may be used to replace both screw and bayonet-type cap fittings • The kit includes a pump with gauge and release pin for depressurisation prior to detachment, four system adaptors and ten radiator cap testing adaptors for use on a wide range of vehicle applications • Supplied in a sturdy, blow-moulded plastic caseThis universal pressure test kit is designed to test and measure the pressure in vehicle cooling systems via the radiator or expansion tank and i…

Expert Quality, plastic coated locking handles to keep valve springs positively compressed during work. Suitable for use on most engines due to double - ended valve cup. Unique double action lever cams action provide choice of operation either above or below valve. Throat depth 165mm. Display packed.

Expert Quality, with plastic coated locking handle. When locked on keeps valve springs positively compressed during maintenance work. Throat depth 160mm. Display packed.

Expert Quality, with plastic coated locking handle. When locked on keeps valve springs positively compressed during maintenance work. Throat depth 160mm. Display packed.

Knurled body with pocket clip, needle point one end and scriber point on the other. For cleaning and repositioning of vehicle washer jets. Supplied with end caps to prevent personal injury when not in use. Display packed.

Expert Quality, for hooking under the ignition coil pack for easy removal. Suitable for use on VW Polo/Golf 1.4L, Caddy 1.4L, Beetle 1.4L, Passat, Touran 1.6L, Phaeton, Transporter, Lupo 4 cylinder and AZD engines. Display packed.

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.