Car Service Station Equipment

General purpose HVLP spray gun with Aluminium body. Suitable for use with all paint types including water - based. Variable fan and fully adjustable flow. Spare nozzle, needle and cap sets are available - see table. Display carton.

A portable battery charger that's suitable for 5Ah - 45Ah lead - acid batteries. Fitted with overheating and polarity protection capabilities. Each battery charger is attached with insulated copper leads, insulated battery clips, 1.5M power cable and non - rewireable 3 pin plug.

For workshop and home use. Suitable for conventional lead acid batteries up to 55Ah. Integral carrying handle, insulated copper leads and battery clips. Display carton.

For workshop and home use. Fully automatic with high frequency technology, continuous adjustment for unsupervised charging and microprocessor controlled. Maintains battery in a 100% fully charged state. Features include polarity inversion protection and thermal overload protection. Suitable for wet, AGM and gel batteries between 40Ah and 160Ah. Microprocessor controlled, Supplied with insulated copper leads and battery clips. Display carton.

This portable 6A smart charger does more than just charge 6V and 12V vehicle batteries. It has the ability to activate, analyse and recondition the battery in 10-steps, making it ideal for deep discharged batteries. The charger can be connected to a Lead-Acid or Lithium battery for a long duration without the risk of overcharging. It can also be used in winter temperatures as low as -20°C. It's easy to use and a cost-effective solution to keep batteries in good condition all year round.

This auto probe carries out tests on DC automotive electrical circuits from 6V up to 24V quickly and efficiently. It is ideal for detecting short circuits and locating bad earths. It is also great for continuity tests and powering up components prior to fitting. The probe has an easy-to-read LED display, which illuminates green for positive voltage and red for negative. It has a long 3.45m cable to enable testing to be carried out right around the vehicle. Supplied with 2 x crocodile clips, wire probe and back probe.

Expert Quality, tester with solid brass body housing a test light. Insulation piercing contact point with protective screw cap. Testing range 6 - 24V DC Supplied with 650mm of insulated cable with crocodile clip. Display packed.

Expert Quality, circuit tester with 1.5M of heavy duty cable and earth (crocodile) clip. Insulated contact point to prevent accidental shorting. Testing range 6 - 24V DC. Display packed.

Automotive circuit tester with 180mm long insulated blade. Fitted with a 3.6m (approx.) recoil lead and heavy duty earth (crocodile) clip. Testing range 6 - 24V DC. Display packed.

High density polyethylene. Resistant to diesel/petrol, oils and most acids. Flexible spout with carrying handle and screw top lid. Metric and US imperial graduations on jug body. Sold loose.

Expert Quality, quick, efficient and economic way to fault find on the following electronic fuel (EFI) systems: GM PFI, GM TBI, GM SCPI, Ford TBI, GEO TBI and Bosch PFI. Packed in blow mould case. Display carton.

Portable battery chargers are suitable for most conventional lead acid (wet) batteries. Simple to use with a selector switch to choose either 6V or 12V and an easy read LED display to show the charging progress while in use. The units feature technology to protect the battery from overcharging and excessive current; the 2.8A does this automatically while the 5.6A and 7.0A have a manual reset. For safety the unit is fitted with short circuit and overheat protection, and the vents help keep the internal fan cool. All have a robust design fitted with a built-in carry handle. Attached with insulated copper leads, battery clips and 1.1m power cable.

Portable battery chargers are suitable for most conventional lead acid (wet) batteries. Simple to use with a selector switch to choose either 6V or 12V and an easy read LED display to show the charging progress while in use. The units feature technology to protect the battery from overcharging and excessive current; the 2.8A does this automatically while the 5.6A and 7.0A have a manual reset. For safety the unit is fitted with short circuit and overheat protection, and the vents help keep the internal fan cool. All have a robust design fitted with a built-in carry handle. Attached with insulated copper leads, battery clips and 1.1m power cable.

Portable battery chargers are suitable for most conventional lead acid (wet) batteries. Simple to use with a selector switch to choose either 6V or 12V and an easy read LED display to show the charging progress while in use. The units feature technology to protect the battery from overcharging and excessive current; the 2.8A does this automatically while the 5.6A and 7.0A have a manual reset. For safety the unit is fitted with short circuit and overheat protection, and the vents help keep the internal fan cool. All have a robust design fitted with a built-in carry handle. Attached with insulated copper leads, battery clips and 1.1m power cable.

Suitable for spraying a wide range of oils, cleaning agents and rust proofing liquids. Fitted with adjustable nozzle. Display packed.

Expert Quality, set of three 6 point Draper Expert HI-TORQ° sockets sizes 17, 19 and 21mm. Manufactured from chrome molybdenum. Fitted with internal and external nylon sleeve preventing damage to wheels and nuts when in use. Supplied in plastic storage case.

Expert Quality, 6 point Draper Expert HI-TORQ° sockets. Manufactured from chrome molybdenum. Sleeved with nylon internally and externally preventing damage to wheels and nuts when used. Display packed.

Expert Quality, 6 point Draper Expert HI-TORQ° sockets. Manufactured from chrome molybdenum. Sleeved with nylon internally and externally preventing damage to wheels and nuts when used. Display packed.

Expert Quality, 6 point Draper Expert HI-TORQ° sockets. Manufactured from chrome molybdenum. Sleeved with nylon internally and externally preventing damage to wheels and nuts when used. Display packed.

High density polyethylene. Resistant to diesel/petrol, oils and most acids. Flexible spout with carrying handle and screw top lid. Metric and US imperial graduations on jug body. Sold loose.

Makes hose clamps of users required length. Two widths of banding available, 8 and 12mm. Each set is supplied with a 3M length of banding and eight tensioning clamps. Display packed.

360° push on connector compatible with most vehicles including; cars, commercial vehicles, motorbikes and trailers. Fitted with an easy to read digital 65mm gauge with a heavy-duty rubber cover for increased protection. Maximum pressure 20bar (300psi), 0-2000kPa.

Designed for use in mechanical, electrical, plumbing, heating and building fields, a versatile high - performance inspection camera engineered to provide excellent performance in all hard to inspect places and with the added benefit of having a waterproof camera for submerged applications. The large 3.5" LCD screen features image capture, record and playback functions and the super bright 6 LED lights to help illuminate even the darkest areas. Fitted with 8.5mm x 1m flexible inspection cable and Supplied with three attachments (hook, mirror, magnet) and an 8G SD card. Powered by 4x AA batteries (Supplied separately) and stored in a padded plastic storage case.

Designed for use in mechanical, electrical, plumbing, heating and building fields, a versatile high - performance borescope engineered to provide excellent performance in all hard to inspect places. The large 3.5" LCD screen features image capture, record and playback functions and the super bright 6 LED lights help illuminate even the darkest areas. Attached with a rechargeable 3.7V lithium - ion battery and fitted with 5.5mmx1m of flexible inspection cable with three attachments (hook, mirror, magnet), an 8G SD card and a USB charging lead. Stored in a padded plastic storage case.