Car Service Station Equipment

Expert Quality, versatile polyethylene oil and fuel funnel for heavy duty garage and agricultural use. A 280mm x 190mm mouth with a 4.7L capacity. Features tapered spout and a mesh filter that prevents debris from entering the funnel outlet.

This oil dispensing unit is designed to make oil filling and changing easier. The large 7.5L capacity pot has a circular shape, and the use of a traditional water (remove) pressure pump (add) design makes it easy to operate. Each stroke provides approximately 70ml with a steady flow, giving a stable, reliable performance without hiccoughs and bubbles. The system comes with 15 adapters suitable for most car models, such as Ford, BMW, Honda, Nissan, VW, Audi, Škoda, Porsche, Mini Cooper, Mercedes-Benz, Hyundai, Kia, Volvo, Toyota and Lexus.

The Draper Trim Removal Kit has been made to expert quality, for the removal and manipulation of interior trims i.e. door panels, dashboard fascias, trim strips and other similar applications in the automotive, marine and aviation industries. Comprises 12 special non-marking nylon tools that fulfil specific requirements, all in a heavy duty canvas compartment tool roll with hook and loop fixing. Specifications Suitable for interior trims i.e. door panels, dashboard fascias, trim strips etc. Similar usage in automotive, marine and aviation industries 12 x special non-marking nylon tools  Heavy duty canvas compartment tool roll  Hook and loop fixing Dimensions:  D 7.8 x W 18.1 x H 25.6 cm

Puller with three reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish. Display packed.

Puller with three reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish. Display packed.

Puller with two reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish. Display packed.

Puller with two reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish. Display packed.

Fully certified 19L tank with liquid - filled gauge for increased accuracy and prolonged service life. Safety valve automatically activates when the air pressure reaches the maximum operating pressure. Pumps air into the tyre void forcing the bead to seat against the rim of the wheel providing an easy way to seat tubeless tyre beads. Suitable for use on cars, commercials, agricultural and ATV tyres. Fitted with a 1/4" BSP male coupler.

A comprehensive wheel servicing kit. Consisting of a semi - automatic tyre changer and wheel balancer. The tyre changer is capable of removing and replacing tyres on wheels up to 23". Powered by a fully motorised turntable and fitted with pneumatically operated clamping jaws and bead breaker enabling the changing of conventional tyres quickly and easily. The bead breaker is attached with a large anti - skid rubber pad, which preserves the tyres and rims. Each machine is attached with a self - centring four - jaw chuck guaranteeing that wheel rims are correctly clamped. Alloy rims are treated particularly gently as the mounting head is provided with plastic protectors. The semi-automatic wheel …

Pair of tyre levers hot forged from EN8 steel hardened, tempered and zinc plated. Carded pair of 2. Display packed.

Hand-held dual reading gauge with straight push-on valve chuck. Scale graduated 0-60psi in increments of two psi and 0-4bar in increments of 0.1 bar. Display packed.

Graduated 6-50 psi in increments of one psi. In line feature allows access to awkwardly positioned tyre valves. Gauge has valve remover and pocket clip. Display packed.

Hand-held dual reading gauge with flexible 250mm long hose. Swivel angled tyre connection and air release valve. Large easy-to-read scale graduated 5 - 100psi in 1psi increments and 0.3 - 7bar in 0.1bar increments. Display packed.

Side entry pencil type, graduated 6-50 psi in increments of one psi. Gauge has a valve remover and pocket clip. Display packed.

Expert Quality, gives fast and easy-to-read measurement of tyre tread depth from 1-26mm in one millimetre graduations on sliding barrel. Includes a 1.6mm graduation to comply with MOT minimum tyre tread depth requirement. Accepted in the UK by the Department of Transport for MOT Testing. Plated steel body with pocket clip. Display packed.

Expert Quality, allows replacement of Schrader valve cores to the correct torque. Important on vehicles with Tyre Pressure Monitoring Systems (TPMS). Max torque 0.60Nm. Display packed.

Expert Quality ultrasonic cleaning tank, fitted with new high - performance transducers for improved cleaning. Attached with an easy to use touch screen control panel and LED display. Extremely effective at removing dirt and grime on watch parts, jewellery (NOT gemstones), coins, PCB boards and electrical components, engine - vehicle and mechanical parts, etc. Ultrasonic cleaning is based on the cavitation effect caused by the high - frequency ultrasonic vibration signals in fluid. The ultrasonic agitation causes microscopic bubbles to be formed which implode violently causing the cavitation effect which creates an intense scrubbing action on the surface of the item being cleaned. The bubbles …

Expert Quality ultrasonic cleaning tank, fitted with new high - performance transducers for improved cleaning. Attached with an easy to use touch screen control panel and LED display. Extremely effective at removing dirt and grime on watch parts, jewellery (NOT gemstones), coins, PCB boards and electrical components, engine - vehicle and mechanical parts, etc. Ultrasonic cleaning is based on the cavitation effect caused by the high - frequency ultrasonic vibration signals in fluid. The ultrasonic agitation causes microscopic bubbles to be formed which implode violently causing the cavitation effect which creates an intense scrubbing action on the surface of the item being cleaned. The bubbles …

The Draper Universal Brake Bleed Kit is a one person hand-operated kit that allows fluid to be drawn from the bleed nipple allowing either bleeding or full replacement of system on cars, vans, trucks, and motorbikes. With magnetic bases on refill bottles means that it is easy to refill and does not require brake reservoir caps. A reservoir top-up kit is also supplied within the box. Specification Reservoir capacity: 0.75L Air inlet size: 1/4" BSP Air supply: 70-120psi (4.8-8.3bar) Weight (empty): 1.235kg

Expert Quality, the unique stepped cap fits the brake-fluid reservoirs on most cars and light commercial vehicles. Supplied with quick connector and used in conjunction with Pneumatic Brake Bleeder Stock No. 28833. Display packed.

Expert Quality, for fast accurate alignment of flywheel pilot hole with clutch drive plate when assembling to vehicles. Supplied with eight precision manufactured steel bushes and three expanding mandrels. Suitable for most cars and light commercial vehicles. Display packed in storage case.

For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car. Precision manufactured steel bushes with chemically blacked finish. Suitable for use on most cars and light commercial vehicles. Display packed in handy storage case.

Expert Quality universal clutch and brake bleeding kit. A comprehensive 6 piece spanner set suitable for most brake and clutch hydraulic units. Colour coded bleed nipples provide easy identification. The bleed nipples are fitted with a 6 - point socket, helping to prevent slipping and rounding. Supplied with a silicon hose and the integrated one - way valve prevents air returning into the system. Supplied in a heavy duty storage case.

Expert Quality, dramatically reduces cooling system refill time by preventing air-locks thus avoiding time-consuming cooling system bleeding. Plugs into air line then attaches to the cooling system to create a vacuum. Filler hose is then connected allowing pre-mixed coolant to flow easily into the system. Supplied with gauge, 1.3M of clear hose, four adaptors and hose end filler. Packed in carrying case.