Car Service Station Equipment

Twin beam mechanical puller for use with Sykes-Pickavant split collet type internal extractors. Mechanical force screw can then be used to draw extractors in place of slide hammer.

Bearing Extractor Set 74-100mmIncludes 74 - 100mm Bearing Extractor (09582200) 57 - 75mm option also available as part number 09582100.A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery.

Bearing Extractor Set 57-100mm Includes 57 - 75mm & 74 - 100mm Bearing Extractors, also available separately as part numbers 09582100 & 09582200 A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery.

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 6.5-8mm

The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Notes Adapter required for the 10/12mm split collet extractor tool (sold separately)

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 19-22mm

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 22-30mm

Collets for Sykes Pickavant mechanical slide hammer puller extractor kits. 2 sizes available: 095816: 38 - 50mm. 095817: 50 - 60mm.

½” UNF fitting Compatible with existing 0958 Internal Split Collet Extractor range Extract components quickly and efficiently when conventional pullers cannot be used Removes gears, bearings, pinions, oil seals etc.

½” UNF fitting Compatible with existing 0958 Internal Split Collet Extractor range Extract components quickly and efficiently when conventional pullers cannot be used Removes gears, bearings, pinions, oil seals etc.

For use with 08542100 Slide Hammer when fitting smaller sized Split Collet Extractors ( 6.5 - 30mm / 09580900 - 09581400 )

These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft. Positive seating allows even tension on inner and outer bearing rings, reducing resistance. Stabilisers reduce sideways movement and self-centre the puller. 3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter). Supplied in blow moulded case with foam.Min Spread: 20mmMax Spread: 95mmAdaptor Dia.: 5.5-8mmPuller Reach: 125mmPlease note that Sykes-Pickavant may require additional time to assemble, calibrate or source certain products/components from their production facilities. Once …

These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft.Positive seating allows even tension on inner and outer bearing rings, reducing resistance.Stabilisers reduce sideways movement and self-centre the puller.3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter).Supplied in blow moulded case with foam.Min Spread: 20mmMax Spread: 117mmAdaptor Dia.: 5.5-12.5mmPuller Reach: 415mmPlease note that Sykes-Pickavant may require additional time to assemble, calibrate or source certain products/components from their production facilities. Once …

150000XT 1500 SERIES 8T EXTRA TRAVEL HYDRAULIC RAM by Sykes-Pickavant

Contents2 x Seals1 x Grease1 x Installation Instructions

1500 Series - Nose Piece for 1500 Hydraulic Ram

Have a simple, grease filled ram instead of the mechanical force screw. This produces more power easily & efficiently. The spring loaded plunger provides direct, non- twisting application of thrust safely.

Twin Head (with centre nut)1 Dia. InternalSee Downloads section for Kit Contents List

Hydraulic Pullers - Ram Extension 50mm (2")See Downloads section for Kit Contents List

Puller Leg - 100mm (4") Working Dimensions165mm Long

Ram Extension 100mm (4") See Downloads section for Kit Contents List

Ram Extension 150mm See Downloads section for Kit Contents List

Hydraulic 1500 series Removes gears, bearings, pulleys and sprockets. Wide range of automotive and industrial applications. Powered by 1500 series hydraulic ram. Safe and easy to use. 8 tonnes of force with minimum effort. Easy to adjust. Non-twisting for improved stability. Supplied with nose piece for use on centred shafts.Contains:1 x Hydraulic Ram1 x Twin Head Assembly or Sliding Beam1 x Ram Extension2 x LegsSelf centering and self locking.Redesigned legs, improving strength.Supplied in cardboard box.Puller Spread: 100 - 200mmPuller Reach Max: 200mmRam Extension: 150mmPlease note that Sykes-Pickavant may require additional time to assemble, calibrate or source certain products/components …

Hydraulic 1500 series Removes gears, bearings, pulleys and sprockets. Wide range of automotive and industrial applications. Powered by 1500 series hydraulic ram. Safe and easy to use. 8 tonnes of force with minimum effort. Easy to adjust. Non-twisting for improved stability. Supplied with nose piece for use on centred shafts.Contains:1 x Hydraulic Ram1 x Twin Head Assembly or Sliding Beam1 x Ram Extension2 x LegsSelf centering and self locking.Redesigned legs, improving strength.Supplied in cardboard box.Puller Spread: 130 - 250mmPuller Reach Max: 250mmRam Extension: 150mmPlease note that Sykes-Pickavant may require additional time to assemble, calibrate or source certain products/components …