Welders

The Tigren Tgn120Mat Mig/Arc/Tig Inverter Welder Is A 4-In-1 Machine That Offers Unrivalled Versatility With Infinitely Variable Power Output Options And High Performance In Gas And Gasless Modes. • 230V (13A) Input Supply • 15A - 120A (Mig) / 15A - 70A (Mma/Tig) Output Current • 120A @ 15% (Mig) / 70A @ 15% (Mma/Tig) Duty Cycles For Longer Welding Times Higher Than Other Brands • 4-In-1 Machine; Gas/Gasless Mig Arc/Mma Tig Processes • Supplied With Wired-In Mig Torch 3Mtr 200A Earth Lead 3Mtr 200A Electrode Lead Handshield Chipping Hammer Wire Brush 200G 0.8Mm Flux-Cored Wire And 2X 0.8Mm Mig Contact Tips • Infinitely Variable Output Settings For High Versatility •

The Sip Autoplus Eco 200 Mig Inverter Welder Is A Dual Process Inverter Welder Specifically Designed For Use In Automotive Environments And Sheet Metal Applications. Compliant With Reg Eu 2019/1784 (Eco Design For Welding Equipment) The Powerful Inverter Technology Can Perform Gas And Gasless Mig And Arc Welding Tasks For Outstanding Versatility. With Superior Arc Stability For Greater Welding Control And Reduced Spatter This Autoplus Delivers Great Performance For An Assured Weld In Demanding Applications. Key Features • Dual Gas/Gasless Mig And Arc Welding Functions • Infinitely Variable Output Adjustment For Control • Dual Led Display Panel Shows Both Volts And Amps •

The SIP HG600 Inverter Plasma Cutter offers powerful performance whilst being extremely portableIt utilises energy-saving PFC technology to enable running on both 110V and 240V supplies. This makes it suitable for a wider range of applications compared to other inverter cutters on the market. Along with this, the HG600 has an array of safety features and pilot arc ignition which can comfortably cut through standard, painted, and coated surfaces. - Features: - 14mm quality cut and 25mm severing capacity - Lightweight and compact design for improved portability - Infinitely variable power output settings for versatility - Energy-saving technology can run on 110V and 240V supplies - Powerful …

Box of 1 Highly efficient Easy to use

Container type- Can Type- Fleet weld 5P Material- Mild steel

Gas service: for use with all fuel Gas with appropriate tip, 5 psig and above Cutting capacity: up to 6'' (300.0 mm) tip series: 1 Tip series: 1 Head angle: 90° 21 inch length

Synergy - This function makes it easier to select the optimal parameters in the welding process. The source automatically selects the wire feed speed and welding current based on the programmed data. It speeds up the start of work, eliminates the risk of misadjustments that negatively affect the quality and appearance of the weld Regulation of inductance: it allows the optimisation of the welding process depending on the thickness of the workpiece and the welding conditions. By reducing inductance, the arc becomes more stable and concentrated, thus producing better penetration Hard soldering – is a process that is very similar to MIG/MAG welding, but the energy consumption is much less. Wi…

MMA welding current: 5-200 A Pulse rate: 0.5 - 999 Hz Voltage: 1~230±10%, 50/60Hz Current consumption: MMA: 24.4 A / TIG: 24.5 A TIG working cycle: 60% - 200A - 18V, 100% - 155A - 15.2V

Package Included #1(Upgrade package): 1 x 250A Mini Welding Machine 1 x Electrode Holder 1 x Work Clamp 1 x Face Shield 1 x Brush (for cleaning welding spatter) 1 Pair x Welding Glove 5 x Welding Rods 1 x Shoulder Strap Package Included #2(Standard package): 1 x 250A Mini Welding Machine 1 x Shoulder Strap 2 x Quick Plug 1 x Inner Hexagon Spanner Specification: Model: MMA-250 Size: 10.5x21.5x16.5cm/4.1x8.5x6.5inch Input voltage: AC 110V/220V Frequency (HZ): 50/60 No-load voltage: 60V Output current: 20-250A Power: 3000W Efficiency: 85% Enclosure protection grade: IP21S Insulation class: F Electrode diameter（Φ）： 1.6/2.5/3.2 mm Working form: inverter welding Welding method: arc

The SIP CSW25P Pneumatic Column Spot Welder offers easy spot welding in a variety of demanding applications, utilising single or double spot welding modes for use on oxidised or coated steels, and a 2-stage pneumatic foot pedal for precise positioning. Perfect for a variety of trade and professional applications. KEY FEATURES 340mm to 480mm standard welding arm length Digital display for welding current and welding time Adjustable air regulator with dampener for easy control 2-stage pneumatic foot pedal; precise work positioning Fitted with high-quality watercooling hoses

Welder Fantasy Twinmig 200-IG MIG handle – MB15 3 metres MMA grip - 1.9 metres Mass cable - 1.9 metres Roll for steel wire 0.6/0.8 mm Roll for steel wire 0.8/1.0 mm Roll for aluminium wire 0.8/1.0 mm MIG welding accessories, gas hose, multilingual manual (English language not guaranteed)

Kemppi MinarcTig Evo 200 MLP TIG handle TX 225G - 4 metres Ground cable – 5 metres Welding accessories Gas hose

V MOSFET technology Cutting thickness: 10 mm Cutting current 20-40 A integrated air compressor Overload protection

Synergy - Synergy - This function makes it easier to select the optimal parameters in the welding process. The source automatically selects the wire feed speed and welding current based on the programmed data, Hard soldering – is a process that is very similar to MIG/MAG welding, but the energy consumption is much less. With brazing, thin sheets are joined that are coated with a zinc layer. With this method, the solder melts and not the material you work with, Regulation of inductance: it allows the optimisation of the welding process depending on the thickness of the workpiece and the welding conditions Spot welding – this function is useful for the overlapping connection of thin sheets as w…

Powerful – the TIG arc welding machine achieves a robust 250 A with a duty cycle of 60% Precise – control the welding current precisely via the large LED display on the DC TIG arc welder Variable – choose between the TIG DC or MMA welding methods using a toggle switch on the welding machine Effective – modern IGBT inverter technology and contact arc ignition prevent disruptions from electromagnetic emissions in line with the EMC standard Mobile – the compact design of the TIG welding machine facilitates easy transport with the convenient carrying handle

The Sip Hg1401Da Inverter Welder Is A Multi-Functional Arc/Tig Inverter Equipped With Anti-Stick Circuitry Lift-Tig Start Function And Voltage Reduction Device. Supplied With Accessories. • 230V (13A) Input Supply • 20A - 140A Output Current; 140A @ 60% Duty Cycle For Longer Welding Times Higher Than Other Brands • 1.5Mm To 7Mm Approximate Welding Thickness • 1.6Mm To 3.2Mmø Electrode Diameter Size • Lift-Tig Start Function And Anti-Stick Circuitry • Lightweight And Compact Design For Portability • Generator-Friendly; Perfect In All Applications • Powerful Voltage Reduction Device (Vrd) • Supplied With Electrode Holder And Cable Plus Earth Cable And Clamp Accessories

Features: 1.Compatible With Flux Core,Spot Welding Quickly.And It Can Atomatically Feed Wire Without Filling When Pressed MIG Torch Button 2.One-time Molding,Don't Need To Knob Slag,Don't Need To Polish.Its efficiency is 30% Higher Than Tranditional ARC 3.With Unified Control Function,Only Has Small Splash.It Can Spot Welding Ultra-thin Material,Make The Spot Point More Sleek And Firm 4.It Can Control The Width Of Welding Bead By Adjusting Inductance. 5.With Overheating And Overcurrent Automatic Protection Function Which Effectively Protect The Internal Circuit Of The Welder From Damage 6.Easily Adjust The Current And Voltage To Welding Parameters: Input voltage: AC~220V±15% Input

Excellent performance values—85 amps at 60 percent duty cycle Separate working modes for short-term and continuous operation, powerful cooling of the power unit, the torch and the workpiece Pilot plasma arc ignition Cutting depth of up to 27 millimetres Easy-to-read LED display

Spartus D-91 tungsten grinder Sharpening disc (standard) Collet for electrode sharpener 1.6 mm Collet for 2.0 mm electrode sharpener Collet for 2.4 mm electrode sharpener Collet for electrode sharpener 3.2 mm Collet for electrode sharpener 4.0 mm ✅ 2-year warranty

Electric electrode holder It is lightweight Constructed for long life and dependability It is heat resistant and insulated for safety Available in 400 amp capacity

Superior arc properties - even, stable performance Generator compatible - suitable for connection to generators (recommended: 7 kW) Easy to use - You set the welding current and get excellent results Practical design: comfortable carrying of the power source at virtually any work place

Alimentation électrique AC 230V 50Hz✔️ Méthodes de soudage TIG DC, MMA✔️ Technologie de soudage IGBT✔️ Courant de soudage MMA : 180A, TIG : 200A✔️ Facteur de service de 60 %.✔️

Supply voltage: 230 V. 50/60 [Hz] Welding methods: TIG HF, MMA Technology: Working cycle 60% - 225 [A] 100% - 174 [A] Welding current TIG: 10-225 [A] MMA max: 225 [A]