Welders

THE MOST ADVANCED MIG MAG INVERTER IN THE MANUFACTURER OFFER ◀▶ One of the few devices on the market offers complete synergistic control with parameter adjustment every 0.1 mm material thickness MIG/MAG WITH DOUBLE PULSE ◀▶ Thanks to the double pulse function allows the highest quality of welds and allows spot welding TOTAL PARAMETER CONTROL ◀▶ The welding machine allows you to adjust all pulse parameters such as: gas flow before and after welding, frequency, balance, maximum current, base current, downward slope time ADAPTABLE FAN ◀▶ The device is equipped with an adaptive fan for quiet and comfortable operation and remote control via WIFI DOOR TO DOOR WARRANTY ◀▶ Professional warranty service wit…

The SIP 05724 AUTOPLUS ECO 180 MIG Inverter Welder has an extra low current function ideal for welding thinner materials The SIP AUTOPLUS ECO 180 MIG Inverter Welder is a versatile dual-process inverter welder engineered with a focus on automotive settings and sheet metal applications. It adheres to Regulation EU 2019/1784 (Eco Design for Welding Equipment), ensuring compliance with eco-friendly welding equipment standards. Powered by advanced inverter technology, this welder is capable of performing both gas and gasless MIG and ARC welding tasks, offering exceptional versatility. Its superior ARC stability enhances welding control while minimizing spatter, making it the perfect choice for …

Box of 1 Highly efficient Easy to use

Container type- Can Type- Fleet weld 5P Material- Mild steel

Gas service: for use with all fuel Gas with appropriate tip, 5 psig and above Cutting capacity: up to 6'' (300.0 mm) tip series: 1 Tip series: 1 Head angle: 90° 21 inch length

Synergy - This function makes it easier to select the optimal parameters in the welding process. The source automatically selects the wire feed speed and welding current based on the programmed data. It speeds up the start of work, eliminates the risk of misadjustments that negatively affect the quality and appearance of the weld Regulation of inductance: it allows the optimisation of the welding process depending on the thickness of the workpiece and the welding conditions. By reducing inductance, the arc becomes more stable and concentrated, thus producing better penetration Hard soldering – is a process that is very similar to MIG/MAG welding, but the energy consumption is much less. Wi…

MMA welding current: 5-200 A Pulse rate: 0.5 - 999 Hz Voltage: 1~230±10%, 50/60Hz Current consumption: MMA: 24.4 A / TIG: 24.5 A TIG working cycle: 60% - 200A - 18V, 100% - 155A - 15.2V

The Sip Autoplus Eco 200 Mig/Arc Inverter Welder Is A Dual Process Inverter Welder Designed For Use In Automotive Environments And Sheet Metal Applications. This Package Deal Is Complete With A 05714 Sip 3-Tier Welding Cart. Compliant With Reg Eu 2019/1784 (Eco Design For Welding Equipment) The Powerful Inverter Technology Can Perform Gas And Gasless Mig And Arc Welding Tasks For Outstanding Versatility. With Superior Arc Stability For Greater Welding Control And Reduced Spatter This Autoplus Delivers Great Performance For An Assured Weld In Demanding Applications. Applications & Uses: Perfect For Automotive Environments. Ideal For Sheet Metal Applications. Suitable For Gas And Gasless

"Package Included 1 x Pipe Welding Machine 3 xWelding Heads ( 20mm 25mm 32mm ) 2 x Fasten Screw 1 x Spanner 1 x Support Shelf 1 x Iron Box Specifications 1. Name: Electric Welding Tool 2. Model: E06307 3. Color: Green 4. Material: Iron Alloy 5. Ambient temperature: -20 ℃ ~ 50 ℃ 6. Relative humidity: 45% to 95% 7. Voltage range: AC 176V ~ 245V 50 ± 1hz 8. Heating head temperature: 260 ± 5 ℃ 9. Safety indicators: insulation resistance of not less than 1MΩ 10. Leakage current: ≤5mA (AC rms) 11. Size: 33x12cm 12. Box Size: 36x15cm Features - For welding plastic pipes such as PP / PPR / PB / PE / PP-C pipe and etc. - Designed for long time use. - Non-slip handle, comfortable to grab. -

The SIP CSW25P Pneumatic Column Spot Welder offers easy spot welding in a variety of demanding applications, utilising single or double spot welding modes for use on oxidised or coated steels, and a 2-stage pneumatic foot pedal for precise positioning. Perfect for a variety of trade and professional applications. KEY FEATURES 340mm to 480mm standard welding arm length Digital display for welding current and welding time Adjustable air regulator with dampener for easy control 2-stage pneumatic foot pedal; precise work positioning Fitted with high-quality watercooling hoses

Welder Fantasy Twinmig 200-IG MIG handle – MB15 3 metres MMA grip - 1.9 metres Mass cable - 1.9 metres Roll for steel wire 0.6/0.8 mm Roll for steel wire 0.8/1.0 mm Roll for aluminium wire 0.8/1.0 mm MIG welding accessories, gas hose, multilingual manual (English language not guaranteed)

Kemppi MinarcTig Evo 200 MLP TIG handle TX 225G - 4 metres Ground cable – 5 metres Welding accessories Gas hose

V MOSFET technology Cutting thickness: 10 mm Cutting current 20-40 A integrated air compressor Overload protection

Synergy - Synergy - This function makes it easier to select the optimal parameters in the welding process. The source automatically selects the wire feed speed and welding current based on the programmed data, Hard soldering – is a process that is very similar to MIG/MAG welding, but the energy consumption is much less. With brazing, thin sheets are joined that are coated with a zinc layer. With this method, the solder melts and not the material you work with, Regulation of inductance: it allows the optimisation of the welding process depending on the thickness of the workpiece and the welding conditions Spot welding – this function is useful for the overlapping connection of thin sheets as w…

Powerful – the TIG arc welding machine achieves a robust 250 A with a duty cycle of 60% Precise – control the welding current precisely via the large LED display on the DC TIG arc welder Variable – choose between the TIG DC or MMA welding methods using a toggle switch on the welding machine Effective – modern IGBT inverter technology and contact arc ignition prevent disruptions from electromagnetic emissions in line with the EMC standard Mobile – the compact design of the TIG welding machine facilitates easy transport with the convenient carrying handle

Specification: -Target:Stainless steel、 aluminum alloy、 carbon steel、 cast iron -Output current adjustment range: 0-160 A -Efficiency: 80% -Weight: 1.7 kg -Input voltage: 220V -Frequency: 50/60 Hz -Power: 4800w -Insulation class: Lass H -Use: electric welding -Power factor: 0.7 -Dimensions: 25*24*8cm（9.8*9.7*3.1 IN） Feature: -Smart digital display screen -Small size, portable, strong power, fast arc formation -Simple welding operation, easy welding of 2.5 and 3.2 electrodes -Efficient heat dissipation system, longer working time -Temperature protection, increase the load rate of the welder -High quality pure copper clip -Current adjustment knob, current/thrust, one button free

Excellent performance values—85 amps at 60 percent duty cycle Separate working modes for short-term and continuous operation, powerful cooling of the power unit, the torch and the workpiece Pilot plasma arc ignition Cutting depth of up to 27 millimetres Easy-to-read LED display

Spartus D-91 tungsten grinder Sharpening disc (standard) Collet for electrode sharpener 1.6 mm Collet for 2.0 mm electrode sharpener Collet for 2.4 mm electrode sharpener Collet for electrode sharpener 3.2 mm Collet for electrode sharpener 4.0 mm ✅ 2-year warranty

Electric electrode holder It is lightweight Constructed for long life and dependability It is heat resistant and insulated for safety Available in 400 amp capacity

Superior arc properties - even, stable performance Generator compatible - suitable for connection to generators (recommended: 7 kW) Easy to use - You set the welding current and get excellent results Practical design: comfortable carrying of the power source at virtually any work place

Alimentation électrique AC 230V 50Hz✔️ Méthodes de soudage TIG DC, MMA✔️ Technologie de soudage IGBT✔️ Courant de soudage MMA : 180A, TIG : 200A✔️ Facteur de service de 60 %.✔️

Supply voltage: 230 V. 50/60 [Hz] Welding methods: TIG HF, MMA Technology: Working cycle 60% - 225 [A] 100% - 174 [A] Welding current TIG: 10-225 [A] MMA max: 225 [A]

The Tigren Tgn140Mma Arc Inverter Welder Has A Lightweight And Compact Design To Offer Easy Portability And Utilises A Scratch-Tig Function Thermal Overload Protection And Fan Cooling For Increased Performance. • 230V (13A) Input Supply • 20A - 140A Output Current; 140A @ 20% Duty Cycle For Longer Welding Times Higher Than Other Brands • 1.5Mm To 7Mm Approximate Welding Thickness • Scratch-Tig Function For An Better Experience • Lightweight And Compact Design For Portability • Generator-Friendly; Perfect In All Applications • Fan-Cooling For Increased High Performance • Thermal Overload Protection For Added Safety • Supplied With 3Mtr 200A Earth Lead 3Mtr 200A