Welders

Precise - high-quality MIG500 welding torch for MIG/MAG welding Durable – Duty cycle at maximum power of 100 % Powerful – ideal for welding work up to 500 A with CO2 and 450 A with mixed protective gas Optimal - gas supply of 10 - 20 l/min for welding and connections for water cooling for the burner Flexible - 5 m hose package for comfortable freedom of movement

Pulse function to improve the quality of the weld, regardless of the position, two types of welding current are generated during welding: basic and pulse current TIG AC – rectangular wave AC welding is used for connecting aluminium and its alloys HF ionizer: contactless arc ignition with high frequencies. This technological solution allows you to eliminate tungsten contamination of the compound ✅ Point – for making the same point-shaped clamps, with adjustable welding time. Mainly used for overlapping or pre-joining structures Bi-level – allows you to switch between two different welding current values without interrupting the work. The change is done by quickly pressing the button on the h…

The Tigren Tgn120Mat Mig/Arc/Tig Inverter Welder Is A 4-In-1 Machine That Offers Unrivalled Versatility With Infinitely Variable Power Output Options And High Performance In Gas And Gasless Modes. • 230V (13A) Input Supply • 15A - 120A (Mig) / 15A - 70A (Mma/Tig) Output Current • 120A @ 15% (Mig) / 70A @ 15% (Mma/Tig) Duty Cycles For Longer Welding Times Higher Than Other Brands • 4-In-1 Machine; Gas/Gasless Mig Arc/Mma Tig Processes • Supplied With Wired-In Mig Torch 3Mtr 200A Earth Lead 3Mtr 200A Electrode Lead Handshield Chipping Hammer Wire Brush 200G 0.8Mm Flux-Cored Wire And 2X 0.8Mm Mig Contact Tips • Infinitely Variable Output Settings For High Versatility •

SIP 05785 HG400 Inverter Plasma Cutter The SIP 05785 inverter Plasma is the ideal technology for consistently clean and highly accurate cutting of conductive materials including steel, stainless steel, copper, bronze and aluminium. Features: - 240v (16amp), 1 phase supply - 20amps - 40amps output current - 4.4 bar compressed air pressure - 3.2CFM average air consumption - Infinitely variable output power settings - 10.0mm cutting capacity (severs 12.0mm) - Digital display showing current settings - Adjustable cooldown time Comes With: - P80 torch (6.0m) - Earth lead (connected) - Air filter regulator, torch kit Specification: - Construction: PLASMA INVERTER - Input …

The TIG 300 DC HF has been designed with advanced inverter technology to provide advanced performance in both DC TIG & MMA (arc welding) modes. Suitable for welding mild steel, stainless, copper & titaniumIn. In TIG mode HF start provides an easy & reliable non-contact way to create an arc removing the possibilty of electrode contamination. Lift start option available where use of HF is prohibited. Advanced features include easy to use digital control panel allowing adjustment of all welding parameters e.g. pre- gas, upslope, pulse frequency, downslope & post-gas. Easy Pulse mode enables the user to adjust only the welding current & the machine automatically adjusts the pulse frequency

Application - provides four 115V plugs rated at 20 amps each, one dual voltage, full KVA plug rated at 115/230V, 50 Amp Weight 1 pound Item - Power plug

Ready to use thanks to wearing part set included Original ESAB accessory #0700025522 Length: 4 m Suitable for ESAB Rogue ES 150i, Rogue ES 180i, Rogue ES 180i Pro, Rogue ES 200i Pro Liftarc ignition

Synergy - This function makes it easier to select the optimal parameters in the welding process. The source automatically selects the wire feed speed and welding current using the programmed data. It speeds up the start of work, eliminates the risk of misadjustments that have a negative effect on the quality and appearance of the weld Double pulse - ensures better transfer of the additive into the welded material, which significantly improves control over the welding process and the quality of the weld itself. Allows you to work in all positions and is particularly suitable for forced spots ✅ Hard soldering - is a process that is very similar to MIG/MAG welding, but the energy consumption is…

The HG2300MP benefits from Hi-tech Inverter technology and low current performance. Supplied with a 3m MB15 Mig torch, 3m earth cable with earth clamp, gas hose and gas clamp, Hand held face mask, Chipping hammer, 0.2Kg 0.8mm flux core wire, 0.6, 0.9 & 1.0mm contact tip.

The Sip Autoplus Eco 200 Mig/Arc Inverter Welder Is A Dual Process Inverter Welder Designed For Use In Automotive Environments And Sheet Metal Applications. This Package Deal Is Complete With A 05714 Sip 3-Tier Welding Cart. Compliant With Reg Eu 2019/1784 (Eco Design For Welding Equipment) The Powerful Inverter Technology Can Perform Gas And Gasless Mig And Arc Welding Tasks For Outstanding Versatility. With Superior Arc Stability For Greater Welding Control And Reduced Spatter This Autoplus Delivers Great Performance For An Assured Weld In Demanding Applications. Applications & Uses: Perfect For Automotive Environments. Ideal For Sheet Metal Applications. Suitable For Gas And Gasless

These superb professional units slice cleanly through mild/stainless steel aluminium brass & copper up to 6mm thick.Easy to operate ideal for autobody repairs. Much faster than oxy-acetylene cutting no need for gas cylinders. Pilot arc torch gives instant cutting even on painted surfaces. With professional on/off torch earth lead & air filter/regulator. No need for air supply - built in air compressor. 25 amps Dimensions (LWH): 525x175x345mm. Weight 16.PTDCLA6016020

Fully 'independent-of-mains' electricity and arc welding for mobile fabricators and for use on construction sites and other outdoor locations. Rugged construction and reliable, proven components ensure the WH215 is up to the demands of everyday on-site use. Download Product Manual

Type - Tweco / Binzel Size: 0.035" Wire Size (In.): 0.04

The information below is per-pack only High quality flux cored MIG wire 1mm/4.5kg wire roll Suitable for 200mm wire reels For gasless welding

Powerful – the electrode welding machine excels with 200 A at a duty cycle of 60 % Precise – use the LED display to set the desired welding current on the manual metal arc (MMA) welding machine and switch between MMA and tungsten inert gas (TIG) lift arc Secure – the VRD function enables welding with the MMA welding machine in damp environments Gentle – TIG-Liftarc permits precise welting without disrupting electronic devices such as mobile phones or control systems Mobile – comfortably carry the compact arc welding machine with the built-in handle

IGBT - modern transistors have been used in the welding machine that ensure a minimum of electromagnetic interference and low power losses in the basic circuits, increasing the efficiency and reliability of the power source 2T/4T hot start mode, useful in welding materials that require preheating. ✅ Hard soldering - is a process that is very similar to MIG/MAG welding, but the energy consumption is much lower. Thin sheets are connected to the brazing, which are coated with a zinc layer. With this method, the solder melts and not the material you work with Hot start – ensures the highest quality of the start of welding, first-class ignition – at the moment of ignition of the arc during a shor…

The Sip Hg1401Da Inverter Welder Is A Multi-Functional Arc/Tig Inverter Equipped With Anti-Stick Circuitry Lift-Tig Start Function And Voltage Reduction Device. Supplied With Accessories. • 230V (13A) Input Supply • 20A - 140A Output Current; 140A @ 60% Duty Cycle For Longer Welding Times Higher Than Other Brands • 1.5Mm To 7Mm Approximate Welding Thickness • 1.6Mm To 3.2Mmø Electrode Diameter Size • Lift-Tig Start Function And Anti-Stick Circuitry • Lightweight And Compact Design For Portability • Generator-Friendly; Perfect In All Applications • Powerful Voltage Reduction Device (Vrd) • Supplied With Electrode Holder And Cable Plus Earth Cable And Clamp Accessories

This multi-functional welder is ideal for HF TIG, Lift ARC & TIG, and MMA/ARC processesThe SIP HG2200P TIG/ARC Inverter Welder is a professional-grade dual-purpose inverter designed with a TIG Pulse facility which provides easier precision welding across a variety of applications and a 9-stage parameter adjustment program.Features: - Ø 1.6mm to Ø 4mm electrode diameter - DC TIG/ARC output current and high-duty cycles - Designed with the latest IGBT inverter technology platform - Multi-functional; HF TIG, Lift ARC & TIG, and MMA/ARC processes - Integrated TIG Pulse facility provides considerably easier precision welds - 9-stage parameter adjustment including slope-up, slope-down, pre/post flo…

Function 1 welding wire: cut this tailor-made and fast Function 2 gas nozzle: time-saving, effective cleaning Function 3 gas nozzle: safe removal from the welding torch Function 4 power nozzle: easy to loosen and tighten

Package Dimensions: 1.0" (L) x 6.0" (W) x 1.0" (H) Product Type: Mechanical Components Package Quantity: 1 Country Of Origin: United States

3 Year Warranty, 100 Day, 100% Satisfaction Guarantee ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control. power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation Lightweight and Portable at only 29lbs Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v …