Welders

The Clarke MMA140A provides a perfect blend of quality construction, power and control that makes it ideal for home, garage or mobile repairs. Ultra-lightweight, weighing in at less than 5kg, this welder is ideal for portable use and provides superior quality ARC welding. Because of the versatility & simplicity of MMA welding, it requires less skill to operate and is used primarily to weld iron and steels (including stainless steel) up to 5mm thick. However, nickel and copper can also be welded using this method. This inverter welder is able to output between 20 and 140A, with an input voltage of 230V/50Hz. The process of MMA/ARC welding uses a coated consumable electrode (stick) to lay

2R for thread Tubular Diameter 1.0 – 1.2 mm

With its technology, the TIG 160 is able to start on LIFT, easy-to-use and mandatory in certain areas where HF is not allowed It offers you the essential parameters to get the best welding that a more advanced full HF TIG can provide with downslope (adjustable by the user) and postgas (automatically set up), unlike a simple MMA unit equipped with a valve torch The gas connector is designed for any professional TIG torch The TIG 160 offers you a complete MMA mode with adjustable Hot Start, Arc Force and Anti Sticking to weld standard rutile, steel, stainless steel, cast iron and basic electrodes to the highest standard

Optimal – Solid wire suitable for MIG/MAG welding devices for protective gas welding Effective - Achieves excellent welding results when welding steel with inert gases such as carbon dioxide or a mixture of argon and carbon dioxide Perfect fit - for wire feed with 0.8 mm Economical - 5 kg welding wire for continuous welding Compatible - Welding wire comes on a wire coil with 20cm diameter and an inner diameter of 5.2cm

Mains protection: 25A (C) Working cycle: 60% - 50A - 98V, 100% - 45A - 96V Welding current: 20-50 A Cutting thickness: 15 mm (separation) / 10 mm (quality) Dimensions: 420 x 125 x 215 mm

This Draper Storm Force® gasless MIG welder utilises flux cored wire making it suitable for welding outside. The adjustable power settings and variable wire speed control provide optimum results for a wide range of work. Lightweight and portable design with carry handle.PTDDRPDIR63669

The SIP 05773 Weldmate HG2300MP Inverter Welder, exceptionally reliable and high performance The HG2300MP Inverter welder can take care of most tasks, as it boasts MIG, TIG and ARC functions. Hi-Tech technology also makes it exceptionally reliable and high performance. Features: - Dinse sockets - 3-in-1 unit machine - 240v (16amp) supply - Solid/Flux-cored types - 0.6mm - 1.0mm wire size - MIG, TIG and ARC capabilities - Extra-low current performance - Lightweight and portable machine - 20amp - 200amp TIG output current - 30amp - 170amp ARC output current - 30amp - 200amp MIG output current Comes with: - Chipping hammer - Handheld face mask - 3m MB15 MIG torch …

The TIG 300 DC HF has been designed with advanced inverter technology to provide advanced performance in both DC TIG & MMA (arc welding) modes. Suitable for welding mild steel, stainless, copper & titaniumIn. In TIG mode HF start provides an easy & reliable non-contact way to create an arc removing the possibilty of electrode contamination. Lift start option available where use of HF is prohibited. Advanced features include easy to use digital control panel allowing adjustment of all welding parameters e.g. pre- gas, upslope, pulse frequency, downslope & post-gas. Easy Pulse mode enables the user to adjust only the welding current & the machine automatically adjusts the pulse frequency

Lincoln provides leading commercial foodservice equipment, including high quality, hot-air conveyor ovens Use genuine OEM parts for safety reliability and performance International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Includes 4 m TIG burner and ground cable and carrying strap With TIG pulse function from 0.2 to 500 Hz Thanks to the PFC module, it is resistant to power fluctuations, even when working with long extension cables 3-year manufacturer's warranty ESAB item number: 0700500081

Spartus EasyMIG 330 double pulse MIG handle – MB-36 – 3 metres MMA grip – 2 metres Ground cable – 2 metres MIG welding accessories Roll for steel wire 1.0/1.2 mm - 2 pieces Gas hose (with clamps)

THE MOST ADVANCED MIG MAG INVERTER IN THE MANUFACTURER OFFER ◀▶ One of the few devices on the market offers complete synergistic control with parameter adjustment every 0.1 mm material thickness MIG/MAG WITH DOUBLE PULSE ◀▶ Thanks to the double pulse function allows the highest quality of welds and allows spot welding TOTAL PARAMETER CONTROL ◀▶ The welding machine allows you to adjust all pulse parameters such as: gas flow before and after welding, frequency, balance, maximum current, base current, downward slope time ADAPTABLE FAN ◀▶ The device is equipped with an adaptive fan for quiet and comfortable operation and remote control via WIFI DOOR TO DOOR WARRANTY ◀▶ Professional warranty service wit…

This superb professional unit slices cleanly through mild/stainless steel aluminium brass & copper making this 230V single phase plasma cutter ideal for autobody repairs.With a pilot arc torch cutting is instant even on painted surfaces. The kit i- Easy to operate - ideal for autobody repairs- Much faster than oxy-acetylene cutting no need for gas cylinders- Pilot arc torch gives instant cutting even on painted surfaces- Comes with professional on/off torch earth lead & air filter/reguPTDCLA6016010

The HG2300MP benefits from Hi-tech Inverter technology and low current performance. Supplied with a 3m MB15 Mig torch, 3m earth cable with earth clamp, gas hose and gas clamp, Hand held face mask, Chipping hammer, 0.2Kg 0.8mm flux core wire, 0.6, 0.9 & 1.0mm contact tip.

Universal TIG welding gun for MIG/MAG welding with friction arc ignition (WIGLift). Gas regulation is possible by unscrewing the valve on the holder. The holder is equipped with a Euro plug. It is equipped with a rubber shielding that protects the cables from abrasion. Euro plug – a universal connection that allows easy and quick replacement and disassembly of the holder. For proper operation of the SR-26FV TIG handle, the wire coil must be removed from the feed. The arc is ignited by rubbing (TIG Lift).

MAKE IT

Synergy: modern electronic microprocessor control system that automatically selects the operating parameters depending on wire diameter, type and thickness Soldering - The welding machine allows a soldering process that allows the galvanised sheets that are often used in car bodies to be freely connected. The main advantage of MIG-MAG welding is the retention of the protective zinc layer on the solder/zinc contact. Regulation of inductance - Correctly selected welding inductance contributes to the reduction of breakouts. It depends on the diameter of the welding wire, the protective gas used, the current and the welding position. A reduction in inductance makes the arc more stable and concentrated,…

This type of welding torch for American TS8000 air conditioner maintenance welding torch, strong fire, mainly used for welding, sheet metal and other heat treatment processing. Features: For use with MAP-PLUS or Propane gas. Piezo ignition for instant flame. Safety lock to prevent accidental ignition. Ignition button lock for continuous use. Replaceable brass tip. Ergonomically designed handle. Anti-flare reliability even when inverted. Specifications: Material: Brass + Stainless steel Temperature: over 1300 celsius Application: Road, refrigerator, air conditioning, hardware, equipment maintenance, garden, outdoor and other fields Safety: Child safety lock Item Size: 270 * 85mm / 10.63 * …

The Sip Hg2300Mp Mig/Arc/Tig Inverter Welder Uses High-Tech Inverter Technology To Provide High Performance As Well As Extra Low Current Output For Versatility Across All 3 Processes. • 230V (16A) Input Supply • 3-In-1 Machine; Mig Arc And Tig Processes • 30A - 200A Mig Output; 200A @ 50% Duty Cycle • 30A - 170A Arc Output; 200A @ 50% Duty Cycle • 20A - 200A Tig Output; 200A @ 50% Duty Cycle • 0.6Mm To 1Mm Ø Wire Size; 0.7Kg To 5Kg Spools • Infinitely Variable Output Settings For High Versatility • High Performance In Gas And Gasless Modes • Lightweight And Compact Design For Portability • Heavy-Duty All-Metal 2-Roll Wire Feed Mechanism • Supplied With Torch And

The SIP HG600 Inverter Plasma Cutter offers powerful performance whilst being extremely portableIt utilises energy-saving PFC technology to enable running on both 110V and 240V supplies. This makes it suitable for a wider range of applications compared to other inverter cutters on the market. Along with this, the HG600 has an array of safety features and pilot arc ignition which can comfortably cut through standard, painted, and coated surfaces. - Features: - 14mm quality cut and 25mm severing capacity - Lightweight and compact design for improved portability - Infinitely variable power output settings for versatility - Energy-saving technology can run on 110V and 240V supplies - Powerful …