Computer Cooling

The Black Ice® SR2™ MP delivers the next level in ultra-stealth PC radiator performance. The new Black Ice® SR2™ 240 MP uses the same ultra-stealth optimized Black Ice® SR2™ compact Xtreme+ core design in a dual-120mm fan form factor.This gives performance enthusiasts a high flow, acoustically balanced and scalable PC radiator platform.Technical details:- Built-in 8-PORT Inlet/Outlet manifold system- 120 mm x 2 fan Xtreme+ form factor 3-row radiator- 278mm x 133mm x 60mm (L x W x H)- 9 FPI 45 Micron Copper Fins- Optimized for sub-800 rpm ultra-stealth fans- Supercruise™ optimizations for scalable performance with higher speed fans- 50% more tubing area than …

The Black Ice® Nemesis® 560GTX® is the quad 140mm fan and largest implementation of the Nemesis® series of radiators.Featuring an enhanced flow GTX® core with Supercruise optimizations, we give the hardcore PC case modder all that is needed to execute a multi-CPU/multi-GPU setup while maintaining whisper quiet operations with better flow and significantly enhanced scalability.Technical details:- 140 mm x 4 fan Xtreme form factor two-pass radiator- 592mm x 153mm x 54mm (L x W x H)- 16 FPI 25 Micron Copper Fins- Now optimized for sub-800 rpm ultra-stealth fans- Supercruise optimizations for scalable performance with higher speed fans- 15% more tubing area in the same Black …

The Black Ice® Nemesis® 140GTS® XFlow steps up to the challenge for high performance for single-fan stealth form factor PC radiators. Featuring the Black Ice® Nemesis® GTS® XFlow core platform, this single 140mm fan radiator is able to provide enhance coolant flow and even better performance under low airflow conditions.This gives PC performance enthusiasts more performance for less noise in the same single-fan form factor. Now featuring a vectored cross-flow tank design, overall system flow rates are enhanced for systems using impingement type waterblocks.Technical details:- 140 mm x 1 fan slim form factor one-pass radiator- 186mm x 153mm x 29.6mm (L x W x H)- 16 FPI …

The Black Ice® Nemesis® 560GTS® is the first official quad fan stealth implemenation for the Black Ice® series of radiators.This radiator not only features the optimized Black Ice® Nemesis® GTS® core but now gives hardcore casemod professionals a quad-fan stealth form factor solution that can take advantage of low-noise 4 x 560mm fans for even greater versatility.Technical details:- 140 mm x 4 fan slim form factor two-pass radiator.- 592mm x 153mm x 29.6mm (L x W x H)- 16 FPI 25 Micron Copper Fins- Now optimized for sub-800 rpm ultra-stealth fans- Supercruise optimizations for scalable performance with higher speed fans- 15% more tubing area in the same Black Ice® …

The Black Ice® Nemesis® 560GTS® is the first official quad fan stealth implemenation for the Black Ice® series of radiators.This radiator not only features the optimized Black Ice® Nemesis® GTS® core but now gives hardcore casemod professionals a quad-fan stealth form factor solution that can take advantage of low-noise 4 x 560mm fans for even greater versatility.Technical details:- 140 mm x 4 fan slim form factor two-pass radiator.- 592mm x 153mm x 29.6mm (L x W x H)- 16 FPI 25 Micron Copper Fins- Now optimized for sub-800 rpm ultra-stealth fans- Supercruise optimizations for scalable performance with higher speed fans- 15% more tubing area in the same Black Ice® …

The Black Ice® Nemesis® 240GTS® scales performance by utilizing low-noise dual sub-800 rpm 120mm fans for even better performance with a reduced noise footprint.This provides casemod enthusiasts with a slim form factor dual fan radiator with the enhanced performance without the acoustic penalties.Technical details:- 120 mm x 2 fan slim form factor two-pass radiator- 278mm x 133mm x 29.6mm (L x W x H)- 16 FPI 25 Micron Copper Fins- Now optimized for sub-800 rpm ultra-stealth fans- Supercruise optimizations for scalable performance with higher speed fans- 15% more tubing area in the same Black Ice® GTS™ 240 form factor- Increased internal coolant flow rates- Standard G 1/4" …

The Black Ice® Nemesis® 120GTS® steps up to the challenge for high performance for single-fan stealth form factor PC radiators. Featuring the Black Ice® Nemesis® GTS® core platform, this single 120mm fan radiator is able to provide enhance coolant flow and even better performance under low airflow conditions.This gives PC performance enthusiasts more performance for less noise in the same single-fan form factor.Technical details:- 120 mm x 1 fan slim form factor two-pass radiator- 158mm x 133mm x 29.6mm (L x W x H)- 16 FPI 25 Micron Copper Fins- Now optimized for sub-800 rpm ultra-stealth fans- Supercruise optimizations for scalable performance with higher speed fans- …

This Tubing will aid you when trying to get that smooth bend in your acrylic tubing. Insert this tube when heating up the acrlic to ensure you get the bend you want and without kinks. Features: - Easy To Use. - Only Compatible With Bitspower Hard Tube Series. - Is Extremely Heat Resistant. - RoHS Compliant.

World Class Tools. World Class Results.Everything you need to fixture and bend acrylic hard lines.Features:- Includes mandrels in 45, 90, 180, and 360.- Mandrels feature extended support arms that hold your tube in position while bending and set the precise angle you want.- Mandrels feature polished center line channels that help maintain the tubes round shape while bending and allow the mandrels to perform double duty when mounted to your building boardthey can be used to bend or as holding fixtures.- Center line capabilities make loop planning, measuring, and using the fixtures very easy by eliminating all the hassle of inside/outside bend radius and top/bottom positioning.- Each mandrel has …

The premium Phanteks Halos Lux are fan frames with RGB lighting which can be mounted to standard 120 mm fans.

Phanteks stands for innovation, quality and distinctive design. The company has built this reputation on the back of its outstanding cases, coolers and fans. With the Halos Lux Digital, Phanteks has taken the next logical step and is offering its RGB-illuminated frames for retrofitting fans with digitially addressable RGB-LEDs to enable complex lighting effects. This will allow any system to look incredible, without compromising on airflow.The Phanteks Halos Digital at a GlancePlastic frame for 120 mm fanLuminous, high-intensity RGB lighting with 30 digitally addressable RGB diodesCompatible for daisy-chaining with all Phanteks Digital RGB productsCompatible with MSI and ASUS motherboards with …

ARGB GPU SUPPORT BRACKET - FORTIFY YOUR GPU
- Eliminate Graphics Card Sag
- Edge-Lit ARGB Tempered Glass
- Easy To Install
- Multiple Orientations
- Protect Your Components
- Versatile Support

A NEW TYPE OF REINFORCEMENT
Tempered glass addressable RGB and edge-lighting technology all crammed into a not-so-simple graphics card support bracket. Sure GPU brackets are an important tool in keeping your motherboards PCI-e slot safe from sag but we bet you didnt expect it to be the new centerpiece to your build.

The MasterAccessory ARGB GPU Support Bracket utilizes the strength and aesthetic of tempered glass in completely new ways. The strength of the TG supports the biggest baddest …

90 Degree 12VHPWR 12+4-Pin to three 8-Pin Cable
Easily improve the aesthetic and cable management with the innovative 12VHPWR 90 degree 12+4 pin connector to 3x 8-pin connector. Reducing the amount of cable on show. Cable length 300mm.
 
- 12+4-pin to three 8-pin
- 90 degree connection
- Supports up to 600W
- Compact and aesthetic design
- Better case spacing



  90 Degree Connection
An angled connection eliminates the necessity for wire bending preventing additional stress on both the cable and the graphics card connector.   Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the …

90 Degree 12VHPWR 12+4-Pin to three 8-Pin Adapter   Innovative 12VHPWR connector that allows you to easily improve the aesthetic and cable management with a 90-degree 12+4-pin to three 8-pin adapter. Supporting up to 600W of power.  
- 12+4-pin to three 8-pin
- 90 degree connection
- Supports up to 600W
- Compact and aesthetic design
- Better case spacing             90 Degree Connection
An angled connection eliminates the necessity for wire bending preventing additional stress on both the cable and the graphics card connector.   Our 12VHPWR connector follows the TYPE 1 configuration …

G-Nexus P16 90 Degree 12VHPWR Adapter
Innovative 12VHPWR connector that allows you to easily improve the aesthetic and cable management with a 90-degree 12+4-pin adapter. Supporting up to 600W of power.
- 12+4-pin to 12+4-pin
- 90 degree connection
- Supports up to 600W
- Compact and aesthetic design
- Better case spacing        
90 Degree Connection
An angled connection eliminates the necessity for wire bending preventing additional stress on both the cable and the graphics card connector.   Our 12VHPWR connector follows the TYPE 1 configuration with the 4-pin on the backplate side located above …

With great gaming power comes the need for elevated thermal performance. With the Phanteks Glacier G3090Ti Gigabyte you can expertly keep your high-end graphics card cool, whilst still enjoying elite tier gaming. Designed for Gigabyte RTX 3090 Ti cards, this waterblock and backplate bundle sports a minimalist and elegant aesthetic, with 15 integrated DRGB chips and a chrome finish. Pairing premium materials and a high-performance design, your water-cooling system can keep up with anything your gaming throws its way. Phanteks Glacier G3090Ti Gigabyte at a Glance: Waterblock and backplate designed for Gigabyte RTX 3090 Ti graphics cards Integrated DRGB lighting with 15 LED chips and daisy …

The Phanteks Glacier 3090Ti ASUS is a premium and high-performance waterblock made for Asus ROG Strix and TUF RTX 3090Ti cards The Glacier 3090Ti features an optimised channel structure and nickel-plated copper base, which ensure that the GPU, VRAM and VRM are cooled effectively. It also has a unique and elegant look thanks to its cover which is made from acrylic glass and anodised aluminium.The Phanteks Glacier G3090Ti at a Glance:Made for Asus Strix and TUF RTX 3090 Ti cardsManufactured from premium materials including: Aluminium, Copper and NickelAcrylic CoverAttractive Satin Black or Mirror Chrome colours available.The Phanteks Glacier G3090 Ti Asus in Detail:Advanced applications such as …

The Phanteks Glacier 3090Ti ASUS is a premium and high-performance waterblock made for Asus ROG Strix and TUF RTX 3090Ti cards The Glacier 3090Ti features an optimised channel structure and nickel-plated copper base, which ensure that the GPU, VRAM and VRM are cooled effectively. It also has a unique and elegant look thanks to its cover which is made from acrylic glass and anodised aluminium.The Phanteks Glacier G3090Ti at a Glance:Made for Asus Strix and TUF RTX 3090 Ti cardsManufactured from premium materials including: Aluminium, Copper and NickelAcrylic CoverAttractive Satin Black or Mirror Chrome colours available.The Phanteks Glacier G3090 Ti Asus in Detail:Advanced applications such as …

Glacier R220C The Glacier R220C is a combo reservoir designed for the DDC pump. The redesigned model now comes with a transparent backplate which creates a more spacious look and delivers immersive lighting experiences with the integrated digital-RGB solution. With it's design and universal 120/140mm fan bracket, the R220C offers for an easy installation with multiple mounting options. Design Made from premium acrylic High quality surface finish Mulitple ports for flexible water loop planning Transparent backplate for a sleek and spacious aesthetic Integrated digital-RGB lighting Compatible with Phanteks didgital-RGB equipped cases Compatible with the Phanteks digital-RGB …

The PHANTEKS Glacier R160C is a reservoir that consists of matt acrylic glass and a transparent backplate for custom water cooling. Thanks to the multi-port design and the varied mounting options and fan brackets along with a cut-out for DDC pumps, the Glacier Reservoir is versatile in how it can be installed while also looking extra stylish thanks to the integrated RGB lighting.The PHANTEKS Glacier R160C Reservoir at a Glance:Reservoir in matt acrylic glass with 120ml fill volumeTransparent backplate in acrylic glassOptimised flow designMounting point for DDC pump and coolerDigitally addressable and synchronisable (via motherboard) RGB lighting5x G1/4 thread ports for maximum compatibilityPremium …

The Phanteks Glacier Pass Through Fittings are the perfect addition for an advanced water cooled build. They have been optimised to ensure stable water flow and easy to fit. As well as being highly practical they also look impressive, coming in either Satin Black or Mirror Chrome.The Phanteks Glacier Pass Through Fitting at a glance:Premium water cooling components1 Piece included in each packAvailable in Satin Black or Mirror ChromeCNC-machined from brassThe Phanteks Glacier Pass Through Fitting in detail:With their Glacier line of fittings, Phantex offers premium components to build and maintain water cooled systems. Each fitting has been CNC-machined from brass to maintain a high quality …

Power up your gaming PC’s cooling with a Phanteks Glacier One D30 AiO. Ideal for modern builds, the Glacier One D30 is compatible with both Intel 13th Gen and AMD Ryzen 7000 Series CPUs. The pump is both powerful and whisper quiet, as it can reach speeds of 3100RPM with a maximum noise level of only 20dB(A). To dissipate heat efficiently, the Phanteks Glacier One D30 utilises a 27mm thick aluminium radiator. Furthermore, these AiOs include the phenomenal D30 fans which, thanks to their 30mm thickness, provide fantastic performance with an airflow of 71.93CFM at a static pressure of 3.32mmH2O. What’s more, the Phanteks Glacier One D30 AiO will look fantastic in any build, as they feature amaz…

Power up your gaming PC’s cooling with a Phanteks Glacier One D30 AiO. Ideal for modern builds, the Glacier One D30 is compatible with both Intel 13th Gen and AMD Ryzen 7000 Series CPUs. The pump is both powerful and whisper quiet, as it can reach speeds of 3100RPM with a maximum noise level of only 20dB(A). To dissipate heat efficiently, the Phanteks Glacier One D30 utilises a 27mm thick aluminium radiator. Furthermore, these AiOs include the phenomenal D30 fans which, thanks to their 30mm thickness, provide fantastic performance with an airflow of 71.93CFM at a static pressure of 3.32mmH2O. What’s more, the Phanteks Glacier One D30 AiO will look fantastic in any build, as they feature amaz…

Level up your gaming PC’s cooling with Phanteks Glacier One T30 Gen2 AiO CPU cooler. You’ll be able to maintain an Intel 13th Gen or AMD 7000 Series CPU at optimum temperatures utilising this high-end cooler. Which is made possible thanks to the large 360mm radiator, which features an astounding 20 fins per inch! To transfer heat between the CPU faceplate and the radiator, this AiO utilises an Asetek Gen8 pump. What’s more, the Glacier One harnesses the power of three innovative Phanteks T30 fans to help dissipate this heat. Each fan can deliver an astounding maximum airflow of 101CFM with a static pressure of 7.11mmH2O at a near silent operation of 39.7dB. Furthermore, the Glacier One will l…