Microphones

Suspension shock mount with ring clamp adaptor that allows the use of RODE Microphones to be used with professional video cameras. It supports camera clamp mounts that effectively grip a 24 or 27mm barrel. The design of the suspension shock mount means the microphone is physically isolated from the stand ensuring that there is no unwanted rumble or vibrations in your recording. 1/4 '' and 3/8 '' threads at the base of the mount allow for easy attachment to a boompole or other accessories. Dimensions: 94 x 60 x 130 mm. Weight: 105 g.
Made in: China

Microphone Clamp

Microphone Clamp

Biamp NPX G1040 Black Conference microphone

MPA-202 2-Channel Low-Noise Microphone Preamplifier 2 microphone inputs, XLR, bal. Gain, 11 steps 20-70dB 2 level controls ±5dB LED green/red for operation/peak Phantom power +12V, can be switched on additionally Microphone phase can be switched for each channel Lo cut 15-240Hz, continuously adjustable Subsonic filter 15Hz, 18dB/oct. 2 line outputs, XLR bal. 2 line outputs, RCA unbal. PC&Music 06/2005 "The MPA-202 provides a clear signal of low noise without any noticeable colouring. This two-channel unit is suitable for everyone looking for a clear sound and a favourable price." Technical Specification Frequency range 20-20,000Hz Input sensitivity 0.16-150mV, switchable Input impedance M…

MPA-102 1-channel low-noise microphone preamplifier for mains operation or battery operation. 1 microphone input, XLR, bal. Gain, 11 steps 20-70dB LED green/red for operation/peak Phantom power +24V, can be switched on additionally Switchable microphone phase Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable 1 preamplifier output 1 stereo line input 1 stereo line output Level control and panorama control for mixing the microphone signal to the stereo line channel tools4music 02/2011 "A high-quality preamplifier." Technical Specification Frequency range 20-20,000Hz Input sensitivity 0.3-150mV, switchable Input impedance Mic 2.2kΩ Stereo line 10kΩ Outputs Line, bal. 1V/100Ω,…

Optimize your next gen experience All the accessories for a good start on PS5. The best quality-price ratio for all your consoles Mythics is always looking for the best value for money. You will find the right accessory for any console. We continue to ensure your satisfaction by designing the most suitable products for gamers needs. The best offer that gathers the essential accessories for a great start on your PS5 ! A headset designed to remain comfortable while long game sessions and improve immersion. Durable high quality silicone grips for use with the PlayStation controller. Play and charge at the same time with this cable from high quality data and load from type A to type C. The silicone …

Swivel Arm / Suitable For universal / Black

Wide range of features
Durable construction
Consistent performance

Microphone Holder for Guitar Cabinets. Features: The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth – this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand. Material: aluminium. Clamping width: 300 - 400 mm. Extension length: 250 mm. Threaded connector: 3/8''. Weight: 0,6 kg.
Weight: 600 g
Made in: China

This 80 cm boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread. The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.
Made in: Germany

Take centre stage and stand with confidence. The Gravity GMS5311B Traveller Microphone Stand is an essential tool for any serious vocalist. No matter what your height the extendable boom arm lets your position like a pro. Whats more the fully collapsible design makes storage and transport easy even when space is a premium. Knocks and drops are no match for the durable construction and the sturdy tripod base keeps everything stable. All you have to do is step into the spotlight.

The MS 43 is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection. For easy height adjustment the MS 43 sports a smooth, durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom designed retainer requires no tools for quick and secure microphone clip attachment. A set of black coding rings is included with the MS 43, additional ring packs are available in a wide array of colours …

The Gravity MS4322HDB is a premium-quality microphone stand with several features which set it apart from others in its class. Every adjustment point on the Gravity MS4322HDB is crafted to be very ergonomic and provide as comfortable an experience as possible. The adjustment knobs have a soft touch thermoplastic coating giving them excellent grip whilst the clutch on the boom makes using the telescopic part of the arm easy even the locking nut is a long tooled nut meaning you can use more of your hand to adjust it offering a far more comfortable experience than a standard mic stand. The die cast zinc hub and sturdy folding legs are strong enough to withstand the rigours of the road and can even …

The MS 4322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation,…

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection. The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone …

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment. A set of black …

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The heavy duty tripod base is made of die cast zinc with ultra strong folding legs of steel and hefty rubber caps for surface protection. The boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment. A set of black coding rings is included with the GMS 3122 HDB, additional ring packs are available in a wide array of colors for instant personalization.…

The MS 2322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 2322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation,…

Microphone floor stand with movable boom (adjustable length: 41-60cm) and shock-absorbing folding feet. Thread: 9mm ( 3/8 "). Mat black lacquered Adjustable height: 56-100cm Storage dimensions: 10x56cm Weight: 2.1kg

Monacor MS-15 Swivel Arm Microphone Stand Black lacquered metal version Supplied with screw clamp (width: up to 55mm) and mounting base Can be adjusted as desired due to 3-joint set-up with tension screws and locking screws Thread: 16mm ( 5/8 ") 5m connection cable with XLR inline jack and XLR plug Length of the arm segments: 460mm and 500mm

Shock-absorbing desktop microphone stand/floor stand with black lacquered finish, variable boom arm and adjustable height. Adjustable height: 36,5-55 cm, Length boom: 37.5 cm, Thread: 16 mm (⅝'') and 9 mm (⅜''), Weight: 2.5 kg
Made in: China

1-channel microphone preamplifier, with switchable phantom power. Features: 1 microphone input, XLR, bal. or 6.3mm jack, unbal. Adjustable gain, up to a max. of 50dB (bal.) or 44dB (unbal.) Clip LED 30V phantom power, can be switched on additionally Technical Specifications: Frequency range 10-30,000Hz Input sensitivity 3.5mV (bal.)/16mV (unbal.), XLR/jack� Input impedance 10kΩ Output voltage 1V Gain 50dB (bal.)/44dB (unbal.) S/N ratio 58dB THD 0.1% Admiss. ambient temp. 0-40 °C Power supply via suppl. plug-in PSU Dimensions (WxHxD) 113x92x40mm Weight 345g Inputs 1 x XLR 1 x 6.3mm jack Outputs 1 x XLR 1 x 6.3mm jack

Phantom Power Adapter with integrated switchable bass roll-off switch. Cable adapter is compatibile with C519, C518 and C516 models from the L-Type Series and all models from 500X series. Legth: 50 cm. Color: Black
Length: 50 cm
~ Length: 0,5 m;1 m
Made in: China
Colour: Black
Type-B Connector: Other
Type-A Connector: XLR Male