Amplifiers

DI Box / Desktop / Number of Channels 1

Passive 8-channels 19" DI Box. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30 dB. The XLR outputs are electrically isolated and balanced via transformer. 8 additional LINK-sockets are also available on the rear panel of the device. Dimensions: 480 (19") x 200 x 45 mm (1 U), Weight 2,39 kg
UK/EU Power supply included: No
Rackmountable: Yes
Made in: Germany
Тype: DI Box

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

Passive 2-channel DI Box. The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Dimensions: Width: 110 mm, Depth: 110 mm, Height: 45 mm - Weight: 0.419 kg
Inputs: Jack 6,3 mm TS
Battery Operation: No
Тype: Passive;DI Box
Outputs: Jack 6,3 mm TS;XLR
Headphone Output: No
UK/EU Power supply included: No
Number of Outputs: 4
Power Supply: Passive
…

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Тype: DI Box
UK/EU Power supply included: No
Battery Operation: Yes
Power Supply: 48V Phantom
Made in: Germany

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Dynamic Processor / 19 Inch Size / Processor Type Compressor / Number of Channels 1 / Rack Height 2 RU

Mustang Micro Plus takes everything players love about Mustang Micro to the next level. With 25 amps and 25 effects onboard, Mustang Micro Plus is the ultimate personal guitar amplifier. Micro Plus features 100 editable preset slots with Fender Tone App support, an integrated tuner, and display.Everything you need to jam is built right in. Just plug Micro Plus directly into your guitar jack, connect a pair of ear buds or headphones, choose from a selection of amazing factory presets. And with built-in Bluetooth audio streaming, you can jam along to your favorite songs or guitar videos in real time.Features25 amp models for a wide range of clean and high gain tones25 effect models with parameter …

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug-in PSU.
Made in: Taiwan
UK/EU Power supply included: No
Battery Operation: No
Power Supply: Adapter

MPA-202 2-Channel Low-Noise Microphone Preamplifier 2 microphone inputs, XLR, bal. Gain, 11 steps 20-70dB 2 level controls ±5dB LED green/red for operation/peak Phantom power +12V, can be switched on additionally Microphone phase can be switched for each channel Lo cut 15-240Hz, continuously adjustable Subsonic filter 15Hz, 18dB/oct. 2 line outputs, XLR bal. 2 line outputs, RCA unbal. PC&Music 06/2005 "The MPA-202 provides a clear signal of low noise without any noticeable colouring. This two-channel unit is suitable for everyone looking for a clear sound and a favourable price." Technical Specification Frequency range 20-20,000Hz Input sensitivity 0.16-150mV, switchable Input impedance M…

MPA-102 1-channel low-noise microphone preamplifier for mains operation or battery operation. 1 microphone input, XLR, bal. Gain, 11 steps 20-70dB LED green/red for operation/peak Phantom power +24V, can be switched on additionally Switchable microphone phase Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable 1 preamplifier output 1 stereo line input 1 stereo line output Level control and panorama control for mixing the microphone signal to the stereo line channel tools4music 02/2011 "A high-quality preamplifier." Technical Specification Frequency range 20-20,000Hz Input sensitivity 0.3-150mV, switchable Input impedance Mic 2.2kΩ Stereo line 10kΩ Outputs Line, bal. 1V/100Ω,…

Microphone Pre-Amp / Foot Pedal / Number of Channels 1

DI box pedal. Symmetrical/unsymmetrical output, Gain switch, Speaker simulation. Metal housing. True Bypass. Power: optional 9V DC power supply. Dimensions: 93.5 mm (L) × 42 mm (W) × 52 mm (H), Weight: 140 g
Rackmountable: No
UK/EU Power supply included: No
Power Supply: Adapter;9V
True Bypass: Yes
Made in: China
Тype: DI Box

Passive stereo direct box. MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source. Suitable for stereo sources like keyboards and media players. 2 x high-impedance 6,3 mm jack inputs with thru outputs. 2 x balanced XLR outputs with ground lift. Ultra low noise and distortion. -15 dB pads ensures distortion-free performance when connecting to high-output sources. 2 x parallel Thru outputs. Built-Like-A-Tank construction - From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks …

DI Box / Desktop / Number of Channels 1

Hybrid tube stereo Hifi amplifier with built-in USB MP3 player and Bluetooth module. It also contains a 2 line stereo inputs. Electron tubes produce clearer and warmer sound than modern transistors. Includes bass, treble (+/- 10dB) corrections, overall volume and input switch: CD, Bluetooth / USB, DVD.
Input impedance: 47kOhm
Input sensitivity: 300mV
Signal to noise ratio:> 80 dB
Harmonic distortion:

Acoustic guitar preamp/DI with saturation and compression EQ. Analog saturation: Often used by studio engineers in post-production, saturation adds warmth, dimension, and pleasing harmonics while smoothing the signal for an enhanced mix. The Session DI’s proprietary saturation is voiced specifically for the acoustic guitar and transports studio analog warmth and inspiring playability to the stage. Compression EQ: Unlike standard compression that can squash the entire range of your signal, the Session DI’s Comp EQ features 3 narrowly focused bands of compression that tame common problematic frequencies and uncover the voice of your guitar. The low, mid, and high frequency compressors are esse…

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Colour: Black.
Battery Operation: Yes
UK/EU Power supply included: No
Made in: China
Тype: DI Box

Summing Amp effect pedal. The device can combine two signals into one mono signal. It is equipped with one foot switch, two inputs and one output. Thanks to its features, it can send two signals to one amplifier or add a stereo signal to mono. The effect has a robust metal construction and is powered by a 9V adapter (not included).
UK/EU Power supply included: No
Power Supply: 9V;Adapter
Made in: USA

General Disclaimer: The image colour may differ from the actual product due to lighting. Please refer to the product for accuracy.
Enhanced Design and Functionality - The hip-dac 3, now available in a Titanium Shadow hue and encased in a sleek Aluminium frame, is not only visually striking but also encompasses a range of updated features and circuit enhancements, such as new metal film capacitors and an updated GMT circuitry, to elevate your audio experience.
Advanced Connectivity and User-friendly Controls - Equipped with two USB-C ports for simplified cable management, the device facilitates clear and high-quality audio playback and allows simultaneous charging. Furthermore, user-friendly …

A Pristine, Compact Sound Amplifier You Build Yourself
The HA-S is a Nutube-equipped DIY Headphone amp kit that will let you enjoy the highest quality audio anywhere. No soldering is required, so even if you are new to the world of DIY, you will be able to assemble the HA-S to add a warm, analog tube-driven signal boost to any sound source in no time!
Battery Operation: Yes
Controls: Volume
Colour: Black
Power Supply: None, Only Battery Operated
UK/EU Power supply included: No
Battery Type: AA
Тype: Headphone Amp
Inputs: Jack 3,5 mm
Outputs: Jack 3,5 mm
Weight (g): 110.0
Made in: Japan
Impedance: 10 Ohm

Microphone Pre-Amp / 9.5 Inch Size / Number of Channels 1 / Rack Height 1 RU